Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jimmychen

Pages: [1]
1
Development Deliberation / Re: where are the mesh files??
« on: November 11, 2008, 02:55:28 am »
Quote from: Tuxide on November 11, 2008, 01:07:49 am
I'm trying to write some stuff on acraig's engine documentation site (on what little time I have), if you have any requests then please make them.

Yeah, I viewed it, good plan!

2
Development Deliberation / Re: where are the mesh files??
« on: November 11, 2008, 12:56:49 am »
So, I must use my own art...
but if I want to do some test works, is there a demo art?

And can you give me some good documents or advices to learn more about this project? :-[

3
Development Deliberation / Re: where are the mesh files??
« on: November 10, 2008, 10:04:50 pm »
Yes, and I get PS art from svn, and put it in a art subdirectory in my PlaneShift directory.
Quote
You also probably want to copy over data/zoneinfo.xml, data/races/, and data/effects/.

Did you mean I should copy them from data directory to the art directory? thanks again :)

4
Development Deliberation / where are the mesh files??
« on: November 10, 2008, 09:11:31 pm »
Run the psserver.exe failed . and the error log follows:
Code: [Select]
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/enkim/enkim.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/ynnwnm/ynnwnm.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/ylianm/ylianm.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/dermm/dermm.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/kran/kran.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/enkif/enkif.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/stonebf/stonebf.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/fynnwn/fynnwn.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/rogue/rogue.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/clacker/clacker.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/rat/rat.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/grendol/grendol.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/gobble/gobble.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/consumer/consumer.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/trepor/trepor.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/ulbernaut/ulbernaut.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\psraceinfo.cpp:155 psRaceInfo::LoadBaseSpeeds SEVERE>
Tue Nov 11 09:59:58 2008, Error loading race mesh file. /planeshift/models/tefusang/tefusang.cal3d
Tue Nov 11 09:59:58 2008,
Tue Nov 11 09:59:58 2008, <\opensource\planeshift\src\server\bulkobjects\dictionary.cpp:93 NPCDialogDict::Initialize SEVERE>
Tue Nov 11 09:59:58 2008, *****************************
Tue Nov 11 09:59:58 2008, WordNet failed to initialize.
Tue Nov 11 09:59:58 2008, ******************************
Tue Nov 11 09:59:58 2008,


Anything I missed??

5
VisualC++ / Re: INT_MAX is not defined
« on: November 10, 2008, 08:23:32 pm »
cool:) , all success! Thank you.

6
VisualC++ / INT_MAX is not defined
« on: November 10, 2008, 02:20:50 am »
I use MSVC 7.1  to build planeshift and get the error:

Code: [Select]
in libpsrpgrules.psmoney.cpp
error C2065: 'INT_MAX' : undeclared identifier 
so I add

Code: [Select]
#include <limits.h>in psconfig.h

And it rebuilds all again :o.

then, another error happens:
Code: [Select]
\planeshift\src\server\command.cpp(162) : error C2666: “pow” :7 overloads have similar conversions
 C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(620): maybe “long double pow(long double,int)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(618): or       â€ślong double pow(long double,long double)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(572): or       â€śfloat pow(float,int)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(570): or       â€śfloat pow(float,float)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(534): or       â€śdouble pow(int,int)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(532): or       â€śdouble pow(double,int)”
        C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7\include\math.h(195): or       â€śdouble pow(double,double)”

it's the only error, please tell me to use which one?? Thanks.



7
Development Deliberation / Re: develop tool?
« on: November 09, 2008, 08:41:38 pm »
 :), I'll try both, thanx!

8
Development Deliberation / develop tool?
« on: November 09, 2008, 11:27:51 am »
  Please tell me , in linux platform what develop tools I can use(emacs?).
  I want to read the code more convenient  like using msvc or eclipse.

  sorry for my poor english.
 

Pages: [1]