PlaneShift

Support => Mac OSX Specific Issues => Topic started by: mizar2 on July 31, 2007, 04:33:05 am

Title: PowerPC client - fullbright & relight crash the client
Post by: mizar2 on July 31, 2007, 04:33:05 am

I didn't see it mentioned but I found fullbright and relight crash the PowerPC OS X 019 client.  I have not downloaded 019a as I understood that only fixed the issue with the missing dyanmic libraries, which I was able to deal with myself.

I was looking at relight and full bright because I have the black terrain in 019 in the Bronze Doors region just like in 018.

I can work around the problem, but I see other people saying to use fullbright to solve problems with the Intel client.

Title: Re: PowerPC client - fullbright & relight crash the client
Post by: Unnamed_Source on August 05, 2007, 06:17:04 am

For what ever reason, if fullbright is not used with the Intel macs, everything except for NPC/PCs is black. That part of the terrain in BD  is like that even with fullbright on, it's not part of the lighting but that part of  the map doesn't load properly. That black terrain has been is BD since the area was put in with 017 build, atleast for a G5 and an Intel.

Try turning on the graphics compression, I didn't have any problems with my old G5 with it on and it made things a little bit better, just follow the steps to turning it off in one of the stickies and turn it on instead. The default now is off. and I didn't use fullbright withthe G5 either, just relit the DR area. Good luck.