PlaneShift

Support => Technical Help: Problems BEFORE entering the game => Topic started by: IAmChrist on December 13, 2003, 10:56:57 pm

Title: Open GL Initialization
Post by: IAmChrist on December 13, 2003, 10:56:57 pm

Most people complain about world somethingorother.. Well, I\'ve got a different problem that seems rather rare to be posted about..

I start in GL mode and I get an Exception error. Hold on, lemme go do it to get the exact error..

\'The instruction at \"0x77f585c0\" referenced memory at \"0x8a000000\". The memory could not be \"written\"\'

I click OK and I get:
\'The instruction at \"0x00000000\" referenced memory at \"0x00000000\". The memory could not be \"read\"\'

I run it again, the Address in the first message changes but the instruction address stays the same. The following output is produced by the -verbose command switch:

C:\\Program Files\\PlaneShift>psclient -verbose
no CEL environment variable set!
Warning: Failed to load `csddsimg\'; reason(s):
LoadLibrary(\'csddsimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\csddsimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\csddsimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\lib\\csddsimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'csddsimg.dll\') error 126: The specified module could not be found.
.\\lib\\csddsimg.dll: File not found
.\\csddsimg.dll: File not found
.\\csddsimg.dll: File not found
Warning: Failed to load `csjngimg\'; reason(s):
LoadLibrary(\'csjngimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\csjngimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\csjngimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\lib\\csjngimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'csjngimg.dll\') error 126: The specified module could not be found.
.\\lib\\csjngimg.dll: File not found
.\\csjngimg.dll: File not found
.\\csjngimg.dll: File not found
Warning: Failed to load `cssgiimg\'; reason(s):
LoadLibrary(\'cssgiimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\cssgiimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\cssgiimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\lib\\cssgiimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'cssgiimg.dll\') error 126: The specified module could not be found.
.\\lib\\cssgiimg.dll: File not found
.\\cssgiimg.dll: File not found
.\\cssgiimg.dll: File not found
Warning: Failed to load `cswalimg\'; reason(s):
LoadLibrary(\'cswalimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\cswalimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\cswalimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'.\\lib\\cswalimg.dll\') error 126: The specified module could not be found.
LoadLibrary(\'cswalimg.dll\') error 126: The specified module could not be found.
.\\lib\\cswalimg.dll: File not found
.\\cswalimg.dll: File not found
.\\cswalimg.dll: File not found

C:\\Program Files\\PlaneShift>

(I cleaned up some Fubar Linebreaks. Studip DOS)

All of my Drivers and my OS are up to date.
Planeshift is up to date. (I ran the update client a few times to be certain)
OS is Windows XP Pro
System Memory is 512 MB SDRAM
System Core Speed is 998 Mhz (1 Ghz) Pentium III
Video Subsystem:
ATI Radeon 7500 PCI
DAC: 350 Mhz
RAM: 64 MB DDR

The system doesn\'t Crash in Software mode.

Title:
Post by: Commando on December 13, 2003, 10:59:22 pm

If it works in Software i suggest the following:

1. Make sure you have the latest drivers of ALL your devices. Well, maby just for motherboard, video and sound

2. Make sure your spaw isn\'t to little

3. Try with another Video card

4. Smash the computer twice and reboot...

Title:
Post by: IAmChrist on December 13, 2003, 11:06:16 pm

Yes..  Each and Every Device is 100% up to date..  I check and check..  Every week I go to windows update (Bleargh) and every 3 or so I check ATI for Video drivers..
The only other video card I have is a POS Nvidea card Running My second Monitor or an Intel i810 Running..  Um..  Nothing >.<

Title:
Post by: Moogie on December 13, 2003, 11:06:45 pm

I could\'ve moved your other thread here to save you having to repost it, but nevermind. :)

Commando: Spaw? what\'s a spaw?


Edit: By the way, the first few lines of that error may suggest there\'s a problem with your RAM. But let\'s hope not... or you\'d have to replace it.

Title:
Post by: IAmChrist on December 13, 2003, 11:08:07 pm

Yes, I am curious about the spaw, too..

As for Moving vs. Reposting, Not a problem..  A single copy//paste is all, and from what I understand it\'s easier for you to delete than move  ^.^

Title:
Post by: IAmChrist on December 15, 2003, 08:12:32 pm

I Managed to get ahold of an Nvidia card, 128 Mb.  It worked and initialized GL mode just fine.  The old card I had was a 64 MB ATI..  So um..  

Now i\'ve gotta lower my Resolution until my system can handle the Gigantic Skyboxed map at a reasonable speed ^.^\"

Thanks for the help of All :)  Ja!

Title:
Post by: Commando on December 15, 2003, 08:37:08 pm

Quote

Originally posted by Mogura
..
Commando: Spaw? what\'s a spaw?
...

I read my post again, and realiest that, there ain\'t such a word. I mean the page file (Virtual Mem)

Title:
Post by: IAmChrist on December 15, 2003, 08:54:45 pm

and I think when you said Spaw you meant Swap ^.^\"