Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pandor

Pages: [1]
1
Technical Help: IN GAME bugs (after loading world) / Re: Molting Iron at the Harn furnace doesn't gives practice points at metallurgy
« on: February 27, 2007, 02:12:03 am »
Quote from: lordraleigh on November 24, 2006, 07:32:39 pm
You still need the book for that. But now molting iron doesn't gives practice points anymore. But anyone with the book can make iron stock and making any stock is the only of getting practice points now.
That's odd. I'm level 0 metallurgy, fully trained and have the 'working with stock' book in mind.
I can melt iron ore, but when i try to cast it, all i get is a 'pile of dust'.

So how should i raise my level then?

*edit*
Nevermind. Stupid me... i was placing my molten iron in the forge, instead of casting stock.
Got it now.  :whistling:

2
Linux Specific Issues / Re: Processor Type
« on: February 10, 2007, 06:51:05 pm »
Quote
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 13
model name      : Intel(R) Pentium(R) M processor 2.10GHz
stepping        : 6
cpu MHz         : 600.000
cache size      : 2048 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
bogomips        : 1199.28

3
Newbie Help (Start Here) / Re: Jump while running possible?
« on: February 05, 2007, 03:13:40 pm »
I am using left shift.
So, should I be able to jump while running?

*edit*

Just did a little test in a text document.
when i hold the left shift, up arrow and press the space bar it doesn't register as a key press.
So i remapped jump to "W" (on a azerty keyboard, that's Z on a qwerty) and that works just fine.

So it seems to be a hardware problem....

4
Newbie Help (Start Here) / Jump while running possible?
« on: February 05, 2007, 12:24:00 am »
Are we supposed to be able to jump while running?
I've been out of the game for a while and just picked it up again and i remember not having any trouble jumping over the pipe in the sewer, until now  :sweatdrop:

I can jump while walking, I can hold shift and jump (higher), but while running (shift+arrow key) when I press the space-bar nothing happens....

Any thoughts?

5
Linux Specific Issues /
« on: March 06, 2006, 05:06:29 pm »
sure.
Code: [Select]
dmesg | grep fglrx
fglrx: module license \'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY\' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 8.22.5 [Feb  7 2006] on minor 0
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] Kernel AGP support doesn\'t provide agplock functionality.
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx] free  AGP = 256126976
[fglrx] max   AGP = 256126976
[fglrx] free  LFB = 119828480
[fglrx] max   LFB = 119828480
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 65536

Code: [Select]
cat /var/log/Xorg.0.log | grep fglrx
(II) LoadModule: \"fglrx\"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor=\"FireGL - ATI Technologies Inc.\"
(II) fglrx(0): pEnt->device->identifier=0x82236c0
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option \"NoAccel\" \"no\"
(**) fglrx(0): Option \"NoDRI\" \"no\"
(**) fglrx(0): Option \"Capabilities\" \"0x00000000\"
(**) fglrx(0): Option \"CapabilitiesEx\" \"0x00000000\"
(**) fglrx(0): Option \"GammaCorrectionI\" \"0x06419064\"
(**) fglrx(0): Option \"GammaCorrectionII\" \"0x06419064\"
(**) fglrx(0): Option \"OpenGLOverlay\" \"off\"
(**) fglrx(0): Option \"VideoOverlay\" \"on\"
(**) fglrx(0): Option \"DesktopSetup\" \"Single\"
(**) fglrx(0): Option \"ScreenOverlap\" \"0\"
(**) fglrx(0): Option \"UseInternalAGPGART\" \"yes\"
(**) fglrx(0): Option \"Stereo\" \"off\"
(**) fglrx(0): Option \"StereoSyncEnable\" \"1\"
(**) fglrx(0): Option \"UseFastTLS\" \"0\"
(**) fglrx(0): Option \"BlockSignalsOnLock\" \"on\"
(**) fglrx(0): Option \"ForceGenericCPU\" \"no\"
(**) fglrx(0): Option \"CenterMode\" \"on\"
(**) fglrx(0): Option \"FSAAScale\" \"1\"
(**) fglrx(0): Option \"FSAAEnable\" \"no\"
(**) fglrx(0): Option \"FSAADisableGamma\" \"no\"
(**) fglrx(0): Option \"FSAACustomizeMSPos\" \"no\"
(**) fglrx(0): Option \"FSAAMSPosX0\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY0\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosX1\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY1\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosX2\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY2\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosX3\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY3\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosX4\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY4\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosX5\" \"0.000000\"
(**) fglrx(0): Option \"FSAAMSPosY5\" \"0.000000\"
(**) fglrx(0): Option \"PseudoColorVisuals\" \"off\"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option \"mtrr\" \"off\"
(--) fglrx(0): Chipset: \"MOBILITY RADEON 9600/9700 (M10/M11 4E50)\" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0061)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xa8000000
(--) fglrx(0): MMIO registers at 0xe0010000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P11
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: LCD on internal LVDS
(II) fglrx(0):  Display1: No EDID information from DDC.
(II) fglrx(0): Derived EDID from BIOS and internal tables for Display1:
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: MS_  Model: 0  Serial#: 0
(II) fglrx(0): Year: 1990  Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync:Serration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 40  vert.: 30
(II) fglrx(0): Gamma: 1.00
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; Non RGB Multicolor Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.000 redY: 0.000   greenX: 0.000 greenY: 0.000
(II) fglrx(0): blueX: 0.000 blueY: 0.000   whiteX: 0.000 whiteY: 0.000
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer\'s mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 60  vid: 16453
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 68.9 MHz   Image Size:  0 x 0 mm
(II) fglrx(0): h_active: 1280  h_sync: 1296  h_sync_end 1328 h_blank_end 1408 h_border: 0
(II) fglrx(0): v_active: 800  v_sync: 800  v_sync_end 800 v_blanking: 816 v_border: 0
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 1
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):   1. 392/203MHz @ 60Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is enabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 13 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode \"1280x800\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"1280x800\"   68.90  1280 1296 1328 1408  800 804 808 816
(**) fglrx(0): *Mode \"1024x768\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"1024x768\"   68.90  1024 1168 1200 1408  768 788 792 816
(**) fglrx(0): *Mode \"800x600\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"800x600\"   68.90  800 1056 1088 1408  600 704 708 816
(**) fglrx(0): *Mode \"640x480\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"640x480\"   68.90  640 976 1008 1408  480 644 648 816
(**) fglrx(0):  Default mode \"848x480\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"848x480\"   68.90  848 1080 1112 1408  480 644 648 816
(**) fglrx(0):  Default mode \"720x576\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"720x576\"   68.90  720 1016 1048 1408  576 692 696 816
(**) fglrx(0):  Default mode \"720x480\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"720x480\"   68.90  720 1016 1048 1408  480 644 648 816
(**) fglrx(0):  Default mode \"640x400\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"640x400\"   68.90  640 976 1008 1408  400 604 608 816
(**) fglrx(0):  Default mode \"640x350\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"640x350\"   68.90  640 976 1008 1408  350 579 583 816
(**) fglrx(0):  Default mode \"512x384\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline \"512x384\"   68.90  512 912 944 1408  384 596 600 816
(**) fglrx(0):  Default mode \"400x300\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline \"400x300\"   68.90  400 856 888 1408  150 704 708 816 doublescan
(**) fglrx(0):  Default mode \"320x240\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline \"320x240\"   68.90  320 816 848 1408  120 644 648 816 doublescan
(**) fglrx(0):  Default mode \"320x200\": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline \"320x200\"   68.90  320 816 848 1408  100 604 608 816 doublescan
(**) fglrx(0): Display dimensions: (401, 303) mm
(**) fglrx(0): DPI set to (81, 67)
(**) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module \"fglrxdrm\"
(II) LoadModule: \"fglrxdrm\"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor=\"FireGL - ATI Technologies Inc.\"
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x0000063e
(==) fglrx(0): OpenGL ClientDriverName: \"fglrx_dri.so\"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM Bus area:     0xa85e9000 (size=0x07a17000)
(II) fglrx(0): UMM area:     0xa85e9000 (size=0x07a17000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 6.8.2.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created \"fglrx\" driver at busid \"PCI:1:0:0\"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe11e6000
(II) fglrx(0): [drm] mapped SAREA 0xe11e6000 to 0xb7a55000
(II) fglrx(0): [drm] framebuffer handle = 0xa8000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.22.5
(II) fglrx(0):     Date: Feb  7 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.15-gentoo-r5
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xe0010000
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3580
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe1581000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xa8000000 FBMappedSize: 0x005e9000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): Interrupt handler installed at IRQ 16.

Code: [Select]
opengl-update --get-implementation
ati

6
Linux Specific Issues /
« on: March 05, 2006, 07:25:56 pm »
i\'m running PS on a laptop with a radeon mobile 9700 with no probs at all (gentoo distro).

lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]

emerge -vp ati-drivers:
x11-drivers/ati-drivers-8.22.5  +opengl

7
Linux Specific Issues /
« on: February 25, 2006, 12:38:02 pm »
I would not suggest installing the tools (cal cal, etc) systemwide but rather put them in a development enviroment (e.g. a folder in you home dir).
They don\'t need to be installed, IF you provide planeshift with the needed path variables before booting it.

Read the compile docs that came with the planeshift sourece to get a better understanding.
you can eighter write a scrip wich exports all the paths each time before loading PS, or add the variables to your console rc script (e.g. ~/.bashrc).

8
Linux Specific Issues /
« on: February 05, 2006, 11:56:26 pm »
check out this patch:
http://bugs.gentoo.org/attachment.cgi?id=78216

it seems that cal3d is not compatible with libtool-1.5.22

9
Linux Specific Issues /
« on: December 21, 2005, 12:05:18 am »
It\'s not quite working out for me...

~/easy_planeshift $ ./build -version
Code: [Select]
Version 1.1

~/easy_planeshift $ ./build diagnose
Code: [Select]
When reporting problems, include the output of this command.

-------------------------------------------------

Build scripts version: 1.1

Distribution: Gentoo Base System version 1.6.13
Operating system: Linux 2.6.14-gentoo-r5 i686

Software packages:
        GNU bash, version 3.00.16(1)-release (i686-pc-linux-gnu)
        Concurrent Versions System (CVS) 1.12.12 (client/server)
        autoconf (GNU Autoconf) 2.59
        automake (GNU automake) 1.9.6
        Jam 2.5rc3. OS=LINUX. Copyright 1993-2002 Christopher Seiwald.
        gcc (GCC) 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)
        GNU sed version 4.1.4

Video card dr
iver info:
        OpenGL vendor string: ATI Technologies Inc.
        OpenGL renderer string: MOBILITY RADEON 9700 Generic
        OpenGL version string: 1.3.5519 (X4.3.0-8.20.8)

Build versions:
        cal3d           2005-10-06 00:00:00
        crystalspace    2005-10-06 00:00:00
        cel             2005-10-06 00:00:00
        planeshift      2005-11-30 00:00:00

-------------------------------------------------


~/easy_planeshift $ ./psrun psclient
Code: [Select]
Executing command: ./psclient
SCF_ERROR: metadata retrieval error for /home/steve/easy_planeshift/binaries/planeshift/pssound.so: Warning: /home/steve/easy_planeshift/binaries/planeshift/pssound.so has embedded data and .csplugin file, using embedded.

planeshift.application.client:
  PlaneShift Crystal Blue
  This game uses Crystal Space Engine created by Jorrit and others
  0.99 r0 [Unix-x86-GCC]
All LOGS are off.
Mounting skin: /this/art/skins/default.zip
Mounting skin: /planeshift/art/skins/base/client_base.zip
  psEngine initialized.
Creating psnetconnection 0x87ed990!

crystalspace.pluginmgr.loadplugin:
  could not load plugin \'cel.physicallayer\'
Couldn\'t load plugin for PlLayer.

seemsto be CEL related so i checked out the binaries/cel/bin folder and found the \'celtst\' script, so i ran that and got a fatal error: \"CEL physical layer missing\".

*edit:
Jst found this:
http://planeshift.oodlz.com/wbboard/thread.php?boardid=17&threadid=13490&sid=f93f3aa554e2f61e95130ad126c9a535

Quote
Originally posted by Xordan
Ok guys, this is a fault in cel. One of the files on the cvs is corrupt or something, so when you download it, you don\'t get it properly. To solve this just download the nightly snapshot of cel and compile it instead of the cvs one you have.

Get the latest one:

http://cel.sourceforge.net/cvs-snapshots/bzip2/cel-current-snapshot.tar.bz2


Maybe your script should get the snapshot, instead of a cvs checkout...

Pages: [1]