1
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 11:27:54 pm »
Create a new char with another name, the char u made before is something like bugged due to linkdead e.g.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Technical Help: Problems BEFORE entering the game / Too much load on hdd and in terminal...lag
« on: May 29, 2003, 11:12:53 pm »
After I got the game to work I came into and there I got the next Problem: The game is laggy whyever.
The Terminal is producing line to line more, my harddisk is on an very high load and the network-connection isnt used over 1%.
Ive put the game to the lowest, able, configuration (640x480x8) and to a high one (1024x768x32), both are the same.
My Graphic Card configuration is ok (RTCW and other Shooters have no Probs) and PS uses OpenGL (Software is much more lag).
Anyone got this, too before or knows how to solve it?
The Terminal is producing line to line more, my harddisk is on an very high load and the network-connection isnt used over 1%.
Ive put the game to the lowest, able, configuration (640x480x8) and to a high one (1024x768x32), both are the same.
My Graphic Card configuration is ok (RTCW and other Shooters have no Probs) and PS uses OpenGL (Software is much more lag).
Anyone got this, too before or knows how to solve it?
3
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 11:08:14 pm »
LinkDead: Looked for Firewall, Proxy etc.?
Some Threads before was told that the Firewall and/or Proxy could make the Problem in some cases. Maybe open the Port etc.
ME and a friend got the LinkDead Prob today and we were both able to solve it through the IP (we both have no firewall, proxy etc.)
Some Threads before was told that the Firewall and/or Proxy could make the Problem in some cases. Maybe open the Port etc.
ME and a friend got the LinkDead Prob today and we were both able to solve it through the IP (we both have no firewall, proxy etc.)
4
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 10:41:05 pm »
To Fix the linkdead Problem just use instead of the \"planeshift.fragnetics.com\" address the IP of the server (203.81.47.27). This fixed it at me and I think it will fix it at other users, too.
You need to enter the IP in the file planeshift.cfg - look for the line:
\"Planeshift.Connection.Server = 203.81.47.27\"
This is my line and it works.
For the 3D Problem: May it happen that You do not have configured Your Graphics Card right? (e.g. if You got nVidia then the Generic of RedHat isnt ok, You need to install an updated for OpenGL. You can use nvcheck.sh for checking if the Card is properly configured.)
I do not know any other issues yet, Ill post if I find out more.
Prove if Crystal Space is working fine, There is an command, dont know right know which.
You need to enter the IP in the file planeshift.cfg - look for the line:
\"Planeshift.Connection.Server = 203.81.47.27\"
This is my line and it works.
For the 3D Problem: May it happen that You do not have configured Your Graphics Card right? (e.g. if You got nVidia then the Generic of RedHat isnt ok, You need to install an updated for OpenGL. You can use nvcheck.sh for checking if the Card is properly configured.)
I do not know any other issues yet, Ill post if I find out more.
Prove if Crystal Space is working fine, There is an command, dont know right know which.
5
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 07:43:21 pm »
Problem solved after 100 restarts of linux and after re-installing the art completely.
6
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 07:09:34 pm »
Got the same error message today after installation.
Was able to fix it with the expor commands in the bashrc and with reinstalling the game again (used the build.sh script)
Was able to fix it with the expor commands in the bashrc and with reinstalling the game again (used the build.sh script)
7
Technical Help: Problems BEFORE entering the game / world initializing... (not posted yet, so read pls)
« on: May 29, 2003, 06:52:14 pm »
I try to connect, then its initializing world
It tells me a few lines with:
Light \'crystalwindowless_tower_top\' was not found in lighting setup 23.
So I startet with -relight -verbose
Then he calculates, but he makes the same error.
Always as last line is written down:
\"Speicherzugriffsfehler\" (Eng: Memory Allocation Error)
How to find out about this Problem?
(Can send me ICQ if You want to)
If You want to read the entiry text which is written in the terminal from the start to the end (several pages) tell me your email-address and I will send it to you.
It tells me a few lines with:
Light \'crystalwindowless_tower_top\' was not found in lighting setup 23.
So I startet with -relight -verbose
Then he calculates, but he makes the same error.
Always as last line is written down:
\"Speicherzugriffsfehler\" (Eng: Memory Allocation Error)
How to find out about this Problem?
(Can send me ICQ if You want to)
If You want to read the entiry text which is written in the terminal from the start to the end (several pages) tell me your email-address and I will send it to you.
8
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 06:06:43 pm »
Found out more:
When this Line appears in Terminal, it hangs up:
PreloadModels: Preloading complete
After about 7 minutes it restarts with this lines in the Terminal:
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Male\'
Couldn\'t create Resource \'Male\'
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Female\'
Couldn\'t create Resource \'Female\'
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Male\'
Couldn\'t create Resource \'Male\'
From now on it is able to create the Character until I try to choose the outfit (hair, eyes etc. wont change when choosing another). When I need to upload it (linkdead)...But this I think I need to get elsewhere in the forums.
Thank You till here :-)
When this Line appears in Terminal, it hangs up:
After about 7 minutes it restarts with this lines in the Terminal:
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Male\'
Couldn\'t create Resource \'Male\'
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Female\'
Couldn\'t create Resource \'Female\'
races[0] is \'Stonebreaker\', not .
races[1] is \'Enkidukai\', not .
races[2] is \'Ynnwn\', not .
races[3] is \'Ylian\', not .
races[4] is \'Xacha\', not .
races[5] is \'Nolthrir\', not .
races[6] is \'Dermorian\', not .
races[7] is \'Hammerwielder\', not .
races[8] is \'Diaboli\', not .
races[9] is \'Kran\', not .
races[10] is \'Lemur\', not .
races[11] is \'Klyros\', not .
Race was not found!
Couldn\'t find a definition for \'Male\'
Couldn\'t create Resource \'Male\'
From now on it is able to create the Character until I try to choose the outfit (hair, eyes etc. wont change when choosing another). When I need to upload it (linkdead)...But this I think I need to get elsewhere in the forums.
Thank You till here :-)
9
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 05:45:32 pm »
I dont need to type, after 5-10 seconds it hangs up.
mouse is moving around but no button works,
before hanging up all is working
when running in window, it wont refresh if i move another window over it.
I need to press ALT-CTRL-Backspace if Iam in fullscreen, it wont exit otherwise, when in window mode a simply close of the terminal window is enough to kill both windows.
Do I need to uninstall the update (install game again) ? (Would be hard for me: Linux-Newb)
mouse is moving around but no button works,
before hanging up all is working
when running in window, it wont refresh if i move another window over it.
I need to press ALT-CTRL-Backspace if Iam in fullscreen, it wont exit otherwise, when in window mode a simply close of the terminal window is enough to kill both windows.
Do I need to uninstall the update (install game again) ? (Would be hard for me: Linux-Newb)
10
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 05:37:46 pm »
OK, it now starts with ./psclient (entered it in the bashrc).
But there comes another problem without an error message in the terminal:
I start via ./psclient
Intro-Screen
Main Menu
click Create
Creation-Screen appears, hangs up (whil typing name and while doin nothing)
Ive tried to change Screen Resolution, color-bits and software/opengl, no effect.
Then i Used ./updater
updates...
still the same problem, again changes screen resolution and other, no effect.
Changed video card type to generic, no effect.
V0.2.0008 is standing in the main menu down right.
Anything I can do?
PS: Thank You for the last message, I thought build.sh would make this automatically.
But there comes another problem without an error message in the terminal:
I start via ./psclient
Intro-Screen
Main Menu
click Create
Creation-Screen appears, hangs up (whil typing name and while doin nothing)
Ive tried to change Screen Resolution, color-bits and software/opengl, no effect.
Then i Used ./updater
updates...
still the same problem, again changes screen resolution and other, no effect.
Changed video card type to generic, no effect.
V0.2.0008 is standing in the main menu down right.
Anything I can do?
PS: Thank You for the last message, I thought build.sh would make this automatically.
11
Technical Help: Problems BEFORE entering the game /
« on: May 29, 2003, 04:37:08 pm »
Hi,
Ive tried Your script but it seems that it isnt working right.
After Your Script:
[meracian@localhost planeshift]$ ./psclient -verbose
no CEL environment variable set!
Warning: Failed to load `vfs\'; reason(s):
/usr/local/crystal/lib/vfs.so: File not found
./vfs.so: File not found
/home/meracian/molblue/planeshift/vfs.so: File not found
Warning: Failed to load `vfs\'; reason(s):
/usr/local/crystal/lib/vfs.so: File not found
/usr/local/crystal/lib/libvfs.so: File not found
./vfs.so: File not found
./libvfs.so: File not found
/home/meracian/molblue/planeshift/vfs.so: File not found
/home/meracian/molblue/planeshift/libvfs.so: File not found
WARNING: could not load plugin \'crystalspace.kernel.vfs\'
Couldn\'t load vfs plugin!
csInitializer::SetupConfigManager failed!
Is your CRYSTAL environment var set?
[meracian@localhost planeshift]$
RedHat 9, All versions of the programs needed are ok.
Some more Error messages:
...failed C++ ./out/linuxx86/optimize/blpython/blcel.o ...
...skipped blpython.so for lack ofblcel.o...
...failed updating 1 target(s)...
...skipped 1 target(s)...
CEL was built...
Getting PlaneShift...
cvs [checkout aborted]: end of file from server (consult above messages if any)
Failed CVS retrying....
Iam no Linux Expert, so this messages dont tell me anything.
Ive just found a few hundreds lines with such text:
blpython/blcel.cpp: In function `void* _p_iReporterIteratorTo_p_iBase(void*)\':
blpython/blcel.cpp:83558: parse error before `)\' token
May it be a problem with python here?
Ive tried Your script but it seems that it isnt working right.
After Your Script:
[meracian@localhost planeshift]$ ./psclient -verbose
no CEL environment variable set!
Warning: Failed to load `vfs\'; reason(s):
/usr/local/crystal/lib/vfs.so: File not found
./vfs.so: File not found
/home/meracian/molblue/planeshift/vfs.so: File not found
Warning: Failed to load `vfs\'; reason(s):
/usr/local/crystal/lib/vfs.so: File not found
/usr/local/crystal/lib/libvfs.so: File not found
./vfs.so: File not found
./libvfs.so: File not found
/home/meracian/molblue/planeshift/vfs.so: File not found
/home/meracian/molblue/planeshift/libvfs.so: File not found
WARNING: could not load plugin \'crystalspace.kernel.vfs\'
Couldn\'t load vfs plugin!
csInitializer::SetupConfigManager failed!
Is your CRYSTAL environment var set?
[meracian@localhost planeshift]$
RedHat 9, All versions of the programs needed are ok.
Some more Error messages:
...failed C++ ./out/linuxx86/optimize/blpython/blcel.o ...
...skipped blpython.so for lack of
...failed updating 1 target(s)...
...skipped 1 target(s)...
CEL was built...
Getting PlaneShift...
cvs [checkout aborted]: end of file from server (consult above messages if any)
Failed CVS retrying....
Iam no Linux Expert, so this messages dont tell me anything.
Ive just found a few hundreds lines with such text:
blpython/blcel.cpp: In function `void* _p_iReporterIteratorTo_p_iBase(void*)\':
blpython/blcel.cpp:83558: parse error before `)\' token
May it be a problem with python here?
Pages: [1]