Author Topic: I got it to create the .exe file...now what? (Read 707 times)

Captainbreakdance · « **on:** July 30, 2003, 04:09:21 pm »

I got it to create it and when i dubba click it it says\"Instaler corrupted or incomeplete.This could be the result of a failed download or corruption from a virus.If desperate,try the/NCRc command line switch(NOT recommended)

CadRipper · « **Reply #1 on:** July 30, 2003, 08:22:33 pm »

Check the length of every file you have downloaded on this page, one or more are probably bad. If you have used a download accelerator, check the status of the 5 files, to be sure they are complete.

The final installer should read 90.028.941 bytes.

And finallly, check that all the files are in the same directory.

Good luck !

Captainbreakdance · « **Reply #2 on:** July 30, 2003, 09:06:18 pm »

I got it installed,now how do I run it?

Kundalf · « **Reply #3 on:** July 30, 2003, 10:59:33 pm »

so if you have the .exe file just run it (double-click left)..

Captainbreakdance · « **Reply #4 on:** July 30, 2003, 11:02:15 pm »

It comes up with the install screen again

CadRipper · « **Reply #5 on:** July 31, 2003, 12:18:37 pm »

Well, I guess that if you have installed it, it should be in the directory you had to specify to the installer.

And, as any other usual program you install, an entry is created into the windows start menu, did you check that first ?

I think you will also need to read this.

Author Topic: I got it to create the .exe file...now what? (Read 707 times)

Captainbreakdance

I got it to create the .exe file...now what?

CadRipper

(No subject)

Captainbreakdance

I got it!

Kundalf

(No subject)

Captainbreakdance

(No subject)

CadRipper

(No subject)