Author Topic: Problem running the client installer on Fedora 9  (Read 1441 times)

SomeCrazyUsername

  • Wayfarer
  • *
  • Posts: 1
    • View Profile
Problem running the client installer on Fedora 9
« on: August 04, 2008, 04:47:48 pm »
Any time I try to run the client installer I get a segmentation fault. I would try to verify the md5 checksum but one for the 4.01 client wasn't listed on the site.

I decided to run valgrind -v which gave me the following output:

A few things caught my eye, but I figured I would post the output; If, that is, the output is even relevant.
Code: [Select]
==4054== Memcheck, a memory error detector.
==4054== Copyright (C) 2002-2007, and GNU GPL'd, by Julian Seward et al.
==4054== Using LibVEX rev 1804, a library for dynamic binary translation.
==4054== Copyright (C) 2004-2007, and GNU GPL'd, by OpenWorks LLP.
==4054== Using valgrind-3.3.0, a dynamic binary instrumentation framework.
==4054== Copyright (C) 2000-2007, and GNU GPL'd, by Julian Seward et al.
==4054==
--4054-- Command line
--4054--    ./PlaneShift-v0.4.01-x86.bin
--4054-- Startup, with flags:
--4054--    -v
--4054-- Contents of /proc/version:
--4054--   Linux version 2.6.25.11-97.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Jul 21 01:31:09 EDT 2008
--4054-- Arch and hwcaps: X86, x86-sse1-sse2
--4054-- Page sizes: currently 4096, max supported 4096
--4054-- Valgrind library directory: /usr/lib/valgrind
--4054-- Reading syms from /usr/lib/valgrind/x86-linux/memcheck (0x38000000)
--4054--    object doesn't have a dynamic symbol table
--4054-- Reading suppressions file: /usr/lib/valgrind/default.supp
--4054-- Reading syms from /lib/ld-2.8.so (0x325000)
--4054-- REDIR: 0x33bad0 (index) redirected to 0x3802cf63 (vgPlain_x86_linux_REDIR_FOR_index)
--4054-- Reading syms from /usr/lib/valgrind/x86-linux/vgpreload_core.so (0x4001000)
--4054-- Reading syms from /usr/lib/valgrind/x86-linux/vgpreload_memcheck.so (0x4003000)
==4054== WARNING: new redirection conflicts with existing -- ignoring it
--4054--     new: 0x0033bad0 (index               ) R-> 0x04006f60 index
==4054== Invalid read of size 4
==4054==    at 0x3300EF: _dl_relocate_object (in /lib/ld-2.8.so)
==4054==    by 0x328B89: dl_main (in /lib/ld-2.8.so)
==4054==    by 0x33A2BD: _dl_sysdep_start (in /lib/ld-2.8.so)
==4054==    by 0x326273: _dl_start (in /lib/ld-2.8.so)
==4054==    by 0x325836: (within /lib/ld-2.8.so)
==4054==  Address 0x4 is not stack'd, malloc'd or (recently) free'd
==4054==
==4054== Process terminating with default action of signal 11 (SIGSEGV)
==4054==  Access not within mapped region at address 0x4
==4054==    at 0x3300EF: _dl_relocate_object (in /lib/ld-2.8.so)
==4054==    by 0x328B89: dl_main (in /lib/ld-2.8.so)
==4054==    by 0x33A2BD: _dl_sysdep_start (in /lib/ld-2.8.so)
==4054==    by 0x326273: _dl_start (in /lib/ld-2.8.so)
==4054==    by 0x325836: (within /lib/ld-2.8.so)
--4054-- REDIR: 0x33bca0 (strlen) redirected to 0x4007210 (strlen)
--4054-- REDIR: 0x33c090 (stpcpy) redirected to 0x4007d90 (stpcpy)
./PlaneShift-v0.4.01-x86.bin: symbol lookup error: /usr/lib/valgrind/x86-linux/vgpreload_core.so: undefined symbol: __libc_freeres
==4054==
==4054== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 4 from 1)
==4054==
==4054== 1 errors in context 1 of 1:
==4054== Invalid read of size 4
==4054==    at 0x3300EF: _dl_relocate_object (in /lib/ld-2.8.so)
==4054==    by 0x328B89: dl_main (in /lib/ld-2.8.so)
==4054==    by 0x33A2BD: _dl_sysdep_start (in /lib/ld-2.8.so)
==4054==    by 0x326273: _dl_start (in /lib/ld-2.8.so)
==4054==    by 0x325836: (within /lib/ld-2.8.so)
==4054==  Address 0x4 is not stack'd, malloc'd or (recently) free'd
--4054--
--4054-- supp:      4 dl-hack3-1
==4054==
==4054== IN SUMMARY: 1 errors from 1 contexts (suppressed: 4 from 1)
==4054==
==4054== malloc/free: in use at exit: 0 bytes in 0 blocks.
==4054== malloc/free: 0 allocs, 0 frees, 0 bytes allocated.
==4054==
==4054== All heap blocks were freed -- no leaks are possible.
--4054--  memcheck: sanity checks: 156 cheap, 7 expensive
--4054--  memcheck: auxmaps: 0 auxmap entries (0k, 0M) in use
--4054--  memcheck: auxmaps_L1: 0 searches, 0 cmps, ratio 0:10
--4054--  memcheck: auxmaps_L2: 0 searches, 0 nodes
--4054--  memcheck: SMs: n_issued      = 23 (368k, 0M)
--4054--  memcheck: SMs: n_deissued    = 0 (0k, 0M)
--4054--  memcheck: SMs: max_noaccess  = 65535 (1048560k, 1023M)
--4054--  memcheck: SMs: max_undefined = 0 (0k, 0M)
--4054--  memcheck: SMs: max_defined   = 17 (272k, 0M)
--4054--  memcheck: SMs: max_non_DSM   = 23 (368k, 0M)
--4054--  memcheck: max sec V bit nodes:    0 (0k, 0M)
--4054--  memcheck: set_sec_vbits8 calls: 0 (new: 0, updates: 0)
--4054--  memcheck: max shadow mem size:   672k, 0M
--4054-- translate:            fast SP updates identified: 785 ( 88.9%)
--4054-- translate:   generic_known SP updates identified: 56 (  6.3%)
--4054-- translate: generic_unknown SP updates identified: 42 (  4.7%)
--4054--     tt/tc: 2,172 tt lookups requiring 2,183 probes
--4054--     tt/tc: 2,172 fast-cache updates, 4 flushes
--4054--  transtab: new        1,036 (24,549 -> 346,744; ratio 141:10) [0 scs]
--4054--  transtab: dumped     0 (0 -> ??)
--4054--  transtab: discarded  252 (6,077 -> ??)
--4054-- scheduler: 15,611,573 jumps (bb entries).
--4054-- scheduler: 156/1,328 major/minor sched events.
--4054--    sanity: 157 cheap, 7 expensive checks.
--4054--    exectx: 769 lists, 3 contexts (avg 0 per list)
--4054--    exectx: 5 searches, 2 full compares (400 per 1000)
--4054--    exectx: 0 cmp2, 5 cmp4, 0 cmpAll
--4054--  errormgr: 3 supplist searches, 30 comparisons during search
--4054--  errormgr: 5 errlist searches, 7 comparisons during search
Segmentation fault


DarinM1967

  • Wayfarer
  • *
  • Posts: 3
    • View Profile
Re: Problem running the client installer on Fedora 9
« Reply #2 on: August 19, 2008, 03:50:08 am »
http://hydlaa.com/smf/index.php?topic=19389.0


I am using Fedora 9 and I am having the same problem as SomeCrazyUsername.  I have followed the above link that Caarrie posted several times, but still received the same problem.  I have downloaded PlaneShift from the both Stacken and Xorden and both returned the same error.  Here are the instructions that I have been following to install PlaneShift:

Downloaded PlaneShift-v0.4.01-x86.bin
opened terminal window
su root (so I can run chmod on file)
cd file's location
chmod a+x PlaneShift-v0.4.01-x86.bin
./PlaneShift-v0.4.01-x86.bin
After a second or so, receive Segmentation fault error!

I have also tried running chmod 755 PlaneShift-v0.4.01-x86.bin, but still received the same error.  If anyone has any other suggestions, please let us know as I have tried several times to install PlaneShift over the last few months and can't get past this error.

Thanks and Take care,
Darin

DarinM1967

  • Wayfarer
  • *
  • Posts: 3
    • View Profile
Re: Problem running the client installer on Fedora 9
« Reply #3 on: August 19, 2008, 04:02:17 am »
http://hydlaa.com/smf/index.php?topic=19389.0


I am using Fedora 9 and I am having the same problem as SomeCrazyUsername.  I have followed the above link that Caarrie posted several times, but still received the same problem.  I have downloaded PlaneShift from the both Stacken and Xorden and both returned the same error.  Here are the instructions that I have been following to install PlaneShift:

Downloaded PlaneShift-v0.4.01-x86.bin
opened terminal window
su root (so I can run chmod on file)
cd file's location
chmod a+x PlaneShift-v0.4.01-x86.bin
./PlaneShift-v0.4.01-x86.bin
After a second or so, receive Segmentation fault error!

I have also tried running chmod 755 PlaneShift-v0.4.01-x86.bin, but still received the same error.  If anyone has any other suggestions, please let us know as I have tried several times to install PlaneShift over the last few months and can't get past this error.

Thanks and Take care,
Darin

 :oops: Forgot to add that I have also ran:

md5sum PlaneShift-v0.4.01-x86.bin

it returned:

63e902a60255a666076799938cddcad4  PlaneShift-v0.4.01-x86.bin

which matches the value at http://hydlaa.com/smf/index.php?topic=19389.0

DarinM1967

  • Wayfarer
  • *
  • Posts: 3
    • View Profile
Re: Problem running the client installer on Fedora 9
« Reply #4 on: August 19, 2008, 06:30:33 am »
CrazyUsername, I figured out how to install the the game by reviewing (though it was not very clear) the topic: http://hydlaa.com/smf/index.php?topic=33336.0

The working steps are:

Download PlaneShift-v0.4.01-x86.bin
open a terminal window
type su root then when prompted it's password (so chmod can be ran on the file)
type cd /file's location
type chmod a+x PlaneShift-v0.4.01-x86.bin
Finally type ./PlaneShift-v0.4.01-x86.bin --mode text

Also it's mandatory to be in root or to have be a super user the appropriate folders will be written.  Hope that helps.

Take care,
Darin