PlaneShift

if an npc synonym occurs in a quest trigger, it'll break that trigger because incoming messages will be replaced by the more_general value while the trigger still expects synonym.
therefore the quest parser should refuse such quests as they're obviously broken or at least throw a warning about such occurrences.

In a quest paying a NPC through a dialog box while having no money results in the following message: "<npc> does not need that".
That seems wrong.

The currently used texture “chest.dds” does not match the UV map of the model for the “Chest” item (animated chest, repeatedly opening and closing).

None of the present textures are compatible to this model.

Either create a matching texture, or replace the model by a supported one.

The message presented when looting a dead NPC with nothing to loot is “… has nothing to be looted”.
While this is valid English, it is more natural to say “… has nothing to loot”.

It’s stupid to not be able to trade (through right clicking the character and clicking ‘trade’) while over encumbered (having to sit down because you’re too heavy). But yet you can just make a shortcut or type /trade and it works.

So my point is, why?

(note: if this task has already been posted and discussed, I did search ‘Trade’ and ‘Trading’)

The leaver leg armor and appentice robes on Enkidukai clamod isn’t working. this might be the same for all enkidukai’s.

It happens for me always again after “opening” and closing nodes. Sorry, haven’t found a way yet to reproduce it every time. Might add some more information here once I find out more ;)

It dispalys the newly opened node above a previously already opened one.

GMail uses the + to denote email aliases: foo+bar@gmail.com delivers to the same GMail inbox as foo@gmail.com. The PS validation system rejects the + character client side, although it is permitted by the RFCs (see RFC5322 s3.2.3/3.4.1). The easy fix is to be much more liberal on the client about what is allowed in an email address, since we’ll be emailing a validation code to it anyway.

As the daytime progresses, each few minutes you see the shadows on the floor flashing, especially obvious near the Laanx temple and on the plaza.

It looks like the shadowmap is completely removed, then restored with a tiny delay. Might be necessary to display shadow states of different daytimes?

At least it is a lot less annoying than the repeated switching between several shadowmaps in earlier versions.

Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.

Fri May  4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May  4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!

for now I added:

<Sound name="amb-day_forrest_4"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

after:

<Sound name="amb-day_forrest_3"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

As per this document:

http://planeshift.ezpcusa.com/pswiki/index.php?title=Sound_System#Sounds_in_factories

the creature sounds are not working properly in game today.

The common.xml file is properly read, and the resources are properly loaded, but the only state ID which works consistently is state ID 2: charge.

Idle seems to kick in only after attacks, and anyway not consistently. The others are never launched. The problem is that those events are not properly sent to the client a sound events.

In particular we need the following events: IDLE, CHARGE (when first engages in combat), COMBAT IDLE, ATTACK, (being) HIT, DIE, WALK, RUN.

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

Nothing major at all, but I cannot change the severity. Is that up to the poster?

Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.

I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :

http://lbalbalba.x90x.net/clang-analyzer/planeshift/

I made a char with a very short name (Min).
Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line
gets highlighted in blue.

I think the dungeon is darker at night. I need a torch then. This makes no sense.

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

/pos: bdoorsin -180.54 19.71 -864.52

How to reproduce: Run into the area between the large boulder and the cliff face there.

What should happen: Your char should, at worst, have to /unstick out of it, or be respawned due to the map leak.

What does happen:

1. Your char (sometimes) gets ‘leaked’ off the map and starts to fall through it
2. As your char falls, they get put back in the normal map area because of the concavity of the cliff face below the path there.
3. Result: a DR trip, because your character goes “splat” at the bottom of the Bronze Doors canyon.

I was working on a batch of Liquid Bread Rise and kept getting “You are not sure what to do with this.” I realize this will probably be nearly impossible to reproduce so I’ll try to explain as best I can exactly what I was doing.

I had started by combining the ingredients (1 Foaming Water, 2 Pinches of Salt, 14 Scoops of Lard) on the preparation table, yielding Unmixed Liquid Bread Dough. Then decided to combine them in the wooden bowl so I could go straight to the mixing step. I had already combined 3 when I switched. I added the ingredients to the wooden bowl and combined, letting it automatically do the mixing step, and this worked fine. The I tried to mix the Unmixed Liquid Bread Dough I had previously combined on the table and that is when I got the “You are not sure what to do with this” message. As long as I combined the items in the wooden bowl and then mixed them I had no trouble. If I tried to put in previously combined Unmixed Liquid Bread Dough it gave me the error message. Several times I reflexively hit the Take All and Stack before it was mixed, and when I tried to put it back in the bowl and mix it I got the error message.
Eventually I had to stop and measure out more scoops of lard, which required switching my wooden spoon for the scoop, since I was also holding a Dagger of Seduction (and wearing a Merc Helm of Seduction, if that matters). After I switched back, I was able to mix the Unmixed Liquid Bread Dough without any trouble… for awhile. (I didn’t realize right away that was what made it work)
Eventually though the problem popped up again (when I prematurely grabbed the mix before it was done, and tried to put it back and finish mixing it, it said “You are not sure what to do with this”) Again, the problem resolved when I switched to measuring lard and back. This happened three times in all. I didn’t put together that it was when I switched tasks that it started working until the third time it happened, so I didn’t have a chance to try just switching tools to see if that was what was fixing it.

This appears to be an option to have lines that appear in Main chat prefaced by origin e.g. [guild], [alliance], etc., provided a user has filtered messages from other chat tabs to appear in Main. However, it seems to work whether or not the option is enabled. Is this a bug or just deliberately no longer an option?

messages.cpp misses another operand?

if(command == “/newguild” || command == “/endguild” || command == “/guildname” || command == “/guildpoints” || command == “/allianceleader”)

 {
     guildname = words.GetTail(1);
     return;
 }

Setting guild MOTD is accidently tied to public notes privilege?

guildmanager.cpp

  if ( ! IsLeader(client))
      if ( ! CheckClientRights(client, RIGHTS_EDIT_PUBLIC, "You do not have rights to change the message of the day in your guild."))
          return;

My understanding is that /setmemberpermissions [member-name] should allow a user with editing permissions to set/change individual guild member permissions, but the command seems to be broken. A bug or intentional?

Drifters Section

“This gas is highly acidic and damages a persons equipped items if they stand in the mist.”

This should be changed to:

This gas is highly acidic and damages a person’s equipped items if they stand in the mist.

Note the apostrophe to indicate a singular possessive noun (person’s).

For crafting book /use command equips book in mind slot - and it’s OK, I think.
But how to open crafting book for reading, as of RMB click in inventory?

Then dragging a book from inventory to shortcut window, /use command is created.
But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty).
Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…

After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(

/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” -
but this syntax described in a Help window! And /write [slot-name] syntax works as expected.

I think it’s clear that /read command for a books must exist to make complete set. Some use cases:

* want to read any book - use /read [item-name] or /read [slot-name]
* want to write to a writable book - use /write [item-name] or /write [slot-name]
* want to equip / dequip any book - use /equip and /dequip commands

Sane default results for /use command:

* Crafting book - equip in a mind slot.

It's a reference book, to take a look from time to time in a crafting process, after all.

* Common book and writable book - open book reading window. Using a book in a real world means “read it”.

Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.

When a male nolthrir is mounted on a rivnak his legs stick into the rivnak.

I've noticed that the sound effects for things like fountains and fires seem to be based on where the camera is located, not where the player is.

To demonstrate, go to 3rd person follow mode and move the camera well back from the character. Position the character near a sound generating item (fireplace in front of temple works). You won't hear it. Move away from the object so that the camera is next to it and you will hear it.

In the current state, if you have focus in the text box of the chat, none of your shortcut hotkeys work, even if they’re mapped to keys that do nothing in the chatbox, such as F1-12, Ctrl, Alt, Tab, Pause, etc.

I’m filing this as a bug report, because either this should be “fixed” so we can map shortcuts to such keys so they will still work while chatting, or the team can decide this is “not a bug” and close it.

The “fix” therefore, is to trap only those keys that chatbox can deal with, and forward anything else to the shortcut processor, so while typing in chat W A S D would be trapped in chat, and F3 would fire the shortcut it’s mapped to.

The screenshots pretty much tell the whole story.

1) Have char A (Primatus for me) enter the GH and sit on some furniture.
2) Have char B (Sabor) log into the GH.

A on A’s client is atop the furniture, while on B’s client A is in the furniture. Probably a symptom of the known issues with object spawning in PS, but still….really guys?

When you use a shape-shifting spell like Gorwealform (assuming the same holds for Polymorph) while mounted, the speed is not set correctly and you can reach no more than walking speed afterwards.

(Merrinez’ Bad Mood)

When I carelessly executed the reply “Thses might help your hands.” (typo fix is probably already pending server update), the gloves my character wears disappeared from his hands, and Merrinez received them. I thought worn armor is not considered to be taken in quests?

If you have a shortcut to equip an item stored in a container in inventory – for example a book in a bag – the container window is opened up in the process. This is unexpected because you can store or sell such items without said container windows being displayed.

I keep my crafting books in a sack in inventory, my shortcut is:
-<shortcut76 name=”Dishes with Fishes” buttonimage=”/planeshift/materials/book_cookingfishes.dds”>

<![CDATA[/dequip mind /use Dishes with Fishes]]>

The same happens with my tool sack - sample shortcut:
-<shortcut78 name=”Masher” buttonimage=”/planeshift/materials/masher01a_icon.dds”>

<![CDATA[/dequip righthand /use Masher]]>

If I need to change tools or books in mid craft I do not want to have to reshow whichever crafting container I am using.

low priority, perhaps.

If you drop an item from your inventory while you are casting analyze dweomer on an another item you receive the message that the item you are identifying is already dead.
For example here I was analyzing Fire Bones Mercenary helm. When I dropped from the inventory another helm I got this message.

(11:09:55) >You start casting the spell Analyze Dweomer
(11:09:59) >Fire Bones Mercenary Helm is already dead.

I am running ps on a OSX system running 10.9.2. The game crashes regularly however when I am playing it. It doesn’t always happen at the same time or in the same place. It seems that it always gives this error though.

Mar 20 09:40:49 macbook kernel[0]: process psclient_static[2932] thread 384705 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
Mar 20 15:15:25 macbook kernel[0]: process psclient_static[3419] thread 457035 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
Mar 20 16:25:02 macbook kernel[0]: process psclient_static[3538] thread 477372 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
Mar 20 16:27:10 macbook com.apple.launchd.peruser.501[286] ([0×0-0x38f38f].psclient[3538]): Job appears to have crashed: Segmentation fault: 11

Any ideas on what is causing this? Thanks in advance.

If you fall off the dais where the fire carkerass is and you have max stats you do not die and you cannot return to the temple. To get back you have to commit suicide.

When I am moving items out of my inventory and get the window to confirm the number of items to move, if the confirmation window is over another window, clicking the OK button closes the amount window (correctly) but pulls the lower window to the top.

Steps to reproduce: Position the Inventory window such that the left overlaps the middle of another window (e.g. a container). Pick a stack of items from the left inventory window with a left-button click. The Amount window should appear with the "OK" button over the lower window. Click "OK." The items will be picked up but the other window will now be on top of the inventory window.

The click action does not trigger an action in the lower window. If the shortcut window is the lower window, the shortcut under the OK will not be triggered, but the shortcut window will be pulled to the top. This may be related to PS#6251.

the inscription reads that “Talad may bless the souls” this implies that he also may not. “May Talad bless” or simply “Talad bless” would be a plea for his intercession. “Talad blesses” would be an affirmation to the reader that they are indeed blessed by Talad whether or not it is actually true.

The map that shows up when you take a pterosaur flight shows a river identified as the Irifon River between Gugrontid and the Bronze Doors. However, there’s no river there and the Irifon is actually located between Hydlaa and Ojaveda.

As the title suggests you continue to get the system message you have gained practice when using a skill despite your practice level not actually increasing.

Hello everyone!
I have updated my client on 2014-05-01 via launcher. Now game crashes in a few seconds right after loading the world. I can see environment, but my character is not able to move, chat interface is not accessible. After about 20 seconds game crashes and returns to a launcher window. I have tried to clear cache before starting, but it doesn’t help. Using “elves” interface skin by default, but changing to another (scholar) leads to the same behaviour. There was no such issue before an update, but it was some weeks ago, maybe system updates can cause a problem as well. Creating a new character does not help much: I can walk a few steps and then game crashes. After that there is no chance to proceed playing using a brand new char because it starts up already “broken”.
My system is: OS: Russian Fedora Remix 20, 3.8 GB RAM, Intel Core i5 CPU 661@3.33 GHz x 4, OS type 64-bit, Graphics Gallium 0.4 on NVC1, GNOME 3.10.2. Operating system is up to date (all latest updates installed successfully)
Update: I have tried to download a new *.run installer, renamed /home/PlaneShift and /home/.PlaneShift and reinstalled client. Same result: the world is loading, I can see my char standing near Harnquist’s blacksmith area, but GUI is frozen and no movement or animation. after a few seconds game crashes back to launcher window.

when the focus is on the inventory (inventory is the active window) i can not make my character go forwards or backwards using the arrow keys. once focus is off of the inventory i can control movement. however left and right still work.

As the title suggests if you add a name like;

Venalan

And you then edit this to say

Venalan “dev”

When you load the client next time around the " will have broken the aliases_name.xml file so none of the added name notes will show. It is because you end up with the following in the xml file

<alias name=”Venalan” alias=”Venalan “Dev”” />

the extra [dev”“] is an unknown component of the <alias /> so breaks the whole formatting of the file.

Often then I'm trying to speak with NPC using "new" NPC dialog, on activate it shows NPC's reply bubble with a common public phrase (instead of [private] quest choices).

Think that NPC speech bubble should be displayed only for NPC's replies on quest choices / answers. Rule is simple: no quest choices made in dialog session = no need to show NPC reply bubble. All other NPC talk should be directed to the chat.

During the last Dev Meeting, there was a good discussion about looting problems, especially after killing multiple opponents.
Aliasing with “/target next” does not solve the problem, because several players confirmed that this command tends to skip corpses.

Therefore Eredin asked for this ticket as a reminder to check the command.

6 times in 2 hours since the update the game crashed. Returned to version 0.6.1 and it stopped. Tried lowering graphical settings to no affect.

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

On install, the launcher defaults to a software sound source which seems to do nothing. I get no sound from it in either windows or linux. Perhaps it should default to openal if that is the only sound system that actually works. Possibly the software selector in pslaunch should be removed or renamed “no sound”

When you equip an item with “BOTH HANDS” flag an icon appears in only the left or right hand inventory slot, whichever you dropped it in.

As the weapon takes up both ‘LEFT’ and ‘RIGHT’ hands it would be clearer if the same icon appeared in both hands to make it clear that both hands are taken up by one item.

It should also be possible to deequip it from the icon in either hand.

At the moment two handed items appear in a single hand and use the animations for single hand weapons. There needs to be a new set of equip and attack animations for each race for two hand weapons.