|
Feature Request | 5255 | No | Crafting | Medium | Unconfirmed | nobody special | | persistent selector for pick up amounts | 20.06.2021 | | 1 |
Task Description
I would find it extremely useful if I could select from 1, 5 and 10 amount when shift clicking a stack of raw materials. This would allow me to improve the efficiency of smelting by picking enough material to cast into stocks of the various types. I could then dump a stack of molten ore into the caster and shift click it to spread out the ores into castable portions. obviously the 5 and 10 amounts are for casting stocks from precious and non precious materials.
It would be useful for this to only apply to molten ores in the furnace as there is no need for ingot/stock to be smelted in these particular numbers. It might be also useful in a forge or other crafting container to have the ability to set to an arbitrary amount when processing ingots or stock for weapon/shield/armor parts.
Perhaps instead of overloading the shift click in this way using the alt click instead would work but this might cause a problem for Apple type computers.
Changed task description to clarify request.
|
|
Feature Request | 5259 | No | Crafting | Medium | Unconfirmed | nobody special | | Make Crafting more like combat | 03.07.2011 | | 1 |
Task Description
I would like it very much if crafting were to be redesigned more like combat. Instead of one action that takes many seconds to complete and generates only one practice or experience reward make it so that each hammer blow is considered and eligible for a reward. For example at level 10 it takes me about two minutes to turn 12 heated ore into 4 shield handles and I get one practice point and some experience at the end of that time. Under my proposed change it might take just as long but each hammer blow on the ingots would receive a success chance roll that would increment the percentage done. A series of low rolls would result in a failure, either junk metal or very low quality handles and a series of high rolls would result in faster time and/or higher quality handles. This would be analogous to hitting a mob until one of you is dead.
I believe this would be more fair in the long run and if it would seem to make great quality items too available the chance to succeed could be reduced.
|
|
Feature Request | 6715 | No | Inventory/Items | Medium | Unconfirmed | nobody special | | Vary current quality of loot items | 23.12.2014 | | 1 |
Task Description
I think it would be more realistic and quite useful for looted items to have a random current quality. Finding enough damaged equipment to practice repair is always tough, this idea would go a long way to making it a more usable skill.
This idea, if properly implemented, could also balance out the values of looted items. A sub-routine could be devised to cause the highest value items suffer the greatest pre-loot damage. So a standard unmodified item could have a flat chance of being anywhere from 1 to 50 out of 50 quality. A one modifier item could roll 2 50-sided dice taking the lower result or average, and so on for 2 modifier and three modifier items. Specific implementation could be subject to testing to determine appropriate rates.
This would result in less of a lottery effect.
|
|
Feature Request | 2532 | No | | Low | Prospect Task | O | | Read, unread, and updated books | 26.12.2009 | | 1 |
Task Description
I don’t spend my life in Jayose’s library. However, once in a while, I would go there and spend a couple of hours reading, looking for new books, sometimes refreshing my memory with older ones.
It would be nice if there was a way to quickly spot a book that one has already read. Maybe a (read) or (unread) mark after the title, or just a different colour for the title font, anything as see fit. A “read” flag would be set as soon as the book is open, to keep it simple, and of course it is the player’s responsibility to read the content. Ok, so far, you can tell me that it’s up to me to remember if I read something or not; even when hundreds of volumes will be available; yes, but…
It gets useful when a book is updated. If I do remember that I read a specific book, well, I’ll probably won’t read it again. Meanwhile, words may have been changed inside, following the inconsistencies hunt, world development, whatever… So, if all statuses are set back to “unread” for all players after a change (or from “read” to “updated” if you want to be more precise), we’ll know that we’d better read it again.
It can be a bit heavy on the database (flagging each book for each player), but at least it’s technically simple. Not to mention other uses you could come up with (quest requisites, statistics for the setting team, etc.)
Also, as Tontow suggested, the info can be stored on the client side instead of a database. To not lose the functionality of the “updated” flag, which is set on the server side, a last updated timestamp for each book is all that is needed on the server. Client side, the log starts empty (no book read). When opening a book, the log is updated (each time) with the book id (its name, I suppose) and the opening timestamp (server time, easier than GMT). When examining a shelf, books are marked according to the log info; thus, if the latest opening date is earlier than the book’s server timestamp, it appears as “updated”.
(Wish list reference: http://hydlaa.com/smf/index.php?topic=34222.0)
|
|
Bug Report | 5331 | No | Engine | Medium | Unconfirmed | R.Guppy | | Art glitch sewers | 19.04.2014 | | 1 |
Task Description
Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.
http://imageshack.us/f/16/shot16.jpg/ >Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02
http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02
|
|
Bug Report | 4236 | No | Guilds/Groups | Medium | New | RlyDontKnow | | dr updates sent for group members without actors | 14.02.2014 | | 1 |
Task Description
the server send DR updates to all group members even if the actor causing it is not in range and therefore the target client doesn’t have an actor associated with it. this results in a “Stat request failed because CelClient not ready for EID:xxxxx” for each movement of the group member that is out of range.
|
|
Feature Request | 5701 | No | Crafting | Medium | New | rodrigo moraes | | Bad user experience: automatic stacking and merging hig... | 18.12.2012 | | 1 |
Task Description
I’m a new user and I just had a very frustrating experience, so I want to propose an improvement.
I requested a guild mate to craft me some chain armor, and when I got it done I picked the Arm piece i was wearing and tried to exchange by the new one. By the gods, the quality-50 armor merged with the quality-300 one and I got two quality-175 armors. Without any confirmation.
I think the merge-on-stack system is fine for many crafting situations, but merging armor stats is a unexpected one. I fail to see why one would want to merge a higher armor with a much lower one. This doesn’t even make sense: if you mix water and herbs it’s ok that you get an infusion, but you can’t mix a chain mail with another one to instantly get two different ones.
I requested a GM to revert the stats and he said that this is the same situation as when one sells or gives away an item by mistake. I think it is not the same thing. This is not a mistake; it is common to exchange items in the inventory to organize or save space, and having these “side-effects” in place can make a simple inventory management a surprisingly bad experience for new users like me. :(
TL;DR:
1. Please review if it really makes sense to merge armors or weapons. I don’t see the use for it, and it sounds illogical, but probably I’m missing something.
2. Please consider adding a confirmation to actions with clearly bad side effects during inventory management, to avoid the frustration, specially for new users.
3. Please consider adding a toggle/checkbox to the inventory to turn on/off automatic item merging (disabled by default to avoid sad surprises like mine).
Thanks for all the hard work, guys. :)
|
|
Bug Report | 5813 | No | Models and Maps | Medium | New | Roman Yagodin | | Abacus icon in "Kilas wants his Abacus Back" | 09.02.2013 | | 1 |
Task Description
1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…
2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.
Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:
Now: “When they’re all to the right, I move them all back and move bead in a second line…“ Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“
|
|
Bug Report | 5816 | No | Rendering Issues | Medium | Unconfirmed | Roman Yagodin | | Hydlaa lights become wrong after moving between locatio... | 11.08.2014 | | 1 |
Task Description
This can be fixed with brightness increse / decrease, but still wierd.
Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8
Report data:
51.0737 2.32624 -133.063 0.416704 -0 0.909042 -0.184466 0.979195 0.084559 -0.890129 -0.202923 0.408035 "hydlaa_plaza" 0
|
|
Feature Request | 5906 | No | GUI | Medium | Unconfirmed | Roman Yagodin | | Disable display quantity for a slots with only one item | 25.02.2013 | | 1 |
Task Description
I think, slots in all windows should not have quantity labels displayed then there is only one item. It concerns inventory window (including equipment slots), a hotbar, container, exchange (could be), etc.
|
|
Feature Request | 5936 | No | GUI | Medium | Unconfirmed | Roman Yagodin | | Book titles for crafting techniques are missing | 06.05.2014 | | 1 |
Task Description
So the subject: book titles for crafting techniques are missing in 0.5.9.10 using “elves” skin (and other skins too):
But writable and setting books are ok:
|
|
Bug Report | 6240 | No | Engine | Medium | Unconfirmed | Roman Yagodin | | Book use commands mess | 21.11.2013 | | 1 |
Task Description
For crafting book /use command equips book in mind slot - and it’s OK, I think. But how to open crafting book for reading, as of RMB click in inventory?
Then dragging a book from inventory to shortcut window, /use command is created. But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty). Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…
After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(
/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” - but this syntax described in a Help window! And /write [slot-name] syntax works as expected.
I think it’s clear that /read command for a books must exist to make complete set. Some use cases:
* want to read any book - use /read [item-name] or /read [slot-name] * want to write to a writable book - use /write [item-name] or /write [slot-name] * want to equip / dequip any book - use /equip and /dequip commands
Sane default results for /use command:
* Crafting book - equip in a mind slot.
It's a reference book, to take a look from time to time in a crafting process, after all.
* Common book and writable book - open book reading window. Using a book in a real world means “read it”.
Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.
|
|
Bug Report | 6472 | No | User Interface | Medium | Unconfirmed | Roman Yagodin | | NPC dialog shows NPC's public phrases | 20.05.2014 | | 1 |
Task Description
Often then I'm trying to speak with NPC using "new" NPC dialog, on activate it shows NPC's reply bubble with a common public phrase (instead of [private] quest choices).
Think that NPC speech bubble should be displayed only for NPC's replies on quest choices / answers. Rule is simple: no quest choices made in dialog session = no need to show NPC reply bubble. All other NPC talk should be directed to the chat.
|
|
Feature Request | 6814 | No | Setting | Medium | Unconfirmed | Roman Yagodin | | Bring gods in the game | 03.04.2017 | | 1 |
Task Description
From game chat:
/tell Laanx Hi, Laanx! > Laanx is not found online.
Current /pray command is a shortcut for /emote pray, but it could be interesting to have separate command to pray gods (or specific god) for miracles or even ask them about something.
“Miracles” should be protective / healing spells, casted on character or group, or offensive spells, casted on enemies. Spell set could vary by god. Rate of success of appeal & spell power could be determined by character race, faction points, number of previous appeals (in the game day), sacrifices and also (maybe) current location, weather and time of the day.
If god name not specified, any god in the mood could answer to the prayer. Also, appeling to the more ancient gods (Laanx, Talad) should have lesser rate of success, but greater miracles or revelations.
Any character (even have no magical abilities and choose to be atheist) could use this command.
Gods could be implemented as (invisible) NPCs.
Example command formats:
Pray: /pray [godname] Ask: /tell [godname] [question] Sacrifice: /give [godname] [itemname]
Forum thread: http://www.hydlaaplaza.com/smf/index.php?topic=42207.msg477124#msg477124
|
|
Bug Report | 7793 | No | Quests | Low | Unconfirmed | Rykia | | Completing the lava cave isn't recognized by Raithen. | 26.02.2023 | | 1 |
Task Description
Quest: The Arrivals Entering and completing the lava cave isn’t recognized by Raithen. I’ve been there twice, but only used the exit once after crossing the magic stones.
|
|
Feature Request | 7814 | No | User Interface | Low | Unconfirmed | Rykia | | Requesting where we type in the chat window scales with... | 07.05.2023 | | 1 |
Task Description
Requesting where we type in the chat window scales with the rest of the window.
We can select a larger font, but where we type in the chat window does not change, only the rest of the chat window.
Note: There is a huge difference between font size 4 and 5. Suggest to have something in between if at all possible.
|
|
Bug Report | 6776 | No | Items Characteristics | Medium | Unconfirmed | Sajut Fogil | Tuathanach | Bow Prices | 20.01.2015 | | 1 |
Task Description
I crafted two bows, the NPC-Price for the Enkidukai Shortbow (needs lvl 20 in bow making and more material) seems to low. Enkidukai Hunting Bow, Q170; 1588 Tria Enkidukai Shortbow, Q193; 1531 Tria
|
|
Feature Request | 3511 | No | Engine | Medium | New | Seytra | | Ideas for inventory accessibility | 15.02.2010 | | 1 |
Task Description
While sacks and other containers are good for bulk storage, they have the significant drawback of making the inventory harder to navigate, and sorting as well, especially since one can always only have exactly one container window open.
To fix this, one might consider the following ideas:
1) allow any number of container windows to be open, so one can simply put stuff from one container into another, instead of having to put it into the main inventory first.
2) instead, make the container window, once opened, refresh by what container you click on, instead of having to go the rightclick-select-open route
3) instead, make any containers append to the main inventory slot space, but replace the first slot with an image of the container, and clearly separate the appended areas from each other and from the main inventory space by a diferent frame style (could be different for each container type), or at least some additional space. Also, slot spaces that are not provided by a container should remain blank so that a container always starts at the first (second) slot of a fresh line.
When selecting a container, the appropriate window / slot area frame should flash or something so that one sees which container has which window.
4) Let container windows be resizable, and possibly more compact by default.
Mounts
Having each mount have an own (player-accessible) inventory would allow:
1) armor / other enhancement slots for the mount 2) mules that actually are mules, not PCs 3) easier inventory handling
Maybe most of the extra inventory (handling like above) should not come from the mount itself, but from the saddle or whatever one uses on it. Without saddle, there would maybe only be two inventory slots or something.
|
|
Bug Report | 3685 | No | NPC Dialog | Low | Assigned | Seytra | Venalan | OK, OK, OK.... abbreviations everywhere | 21.12.2010 | | 1 |
Task Description
In the NPC dialogs, there are several instances of modern-day abbreviations like "OK", "info" or "wow" (may be acceptable) being used. For example, in Fruntar's "Schaeminare soap" quest you can respond with "OK, where do I get this soap." (should be a question mark there, too). Also, in "A wife's dilemma", you can say to Tilavi "Ok, what kind of deal?". Maybe one could run a database search for "OK", "Ok", etc. on the NPC/quest responses to find all occurences?
|
|
Feature Request | 4237 | No | GUI | Medium | New | Seytra | | Ability to add custom tabs to chat window | 23.03.2010 | | 1 |
Task Description
In order for the custom channels to be useful, they need a convenient interface. The need for typing /x before stuff isn’t terribly annoying, but also not terribly convenient. However, the biggest issue is that with multiple such channels, all talk gets mangled into one. The designation for the originating channel doesn’t help much in that case.
Therefore it would be nice to be able to create and assign custom tabs to channels, which would then function just like any of the built-in tabs. It would be even nicer if that arrangement could be stored, which would go very well with the auto-joining of custom channels proposed elsewhere.
|
|
Bug Report | 6729 | No | Crafting | Medium | Unconfirmed | Shafaragorn | Venalan | Bow making interruptions for nonexistent movement | 11.02.2016 | | 1 |
Task Description
When working on bow making at the Arena smith table: if you /use the table, when the progress bar shows that you are done, instead of being done with whatever you’re doing, you get a message that reads “You interrupted your work when you moved away” without having moved at all.
I’ve repeated it multiple times working on a few different things, but haven’t tried at any other smith tables yet.
|
|
Bug Report | 6262 | No | Engine | Medium | New | Simone | Davide Vescovini | Resurrecting MOBs | 26.01.2014 | | 1 |
Task Description
When you try to kill some kind of MOBs, usually humanoids, with the ability to heal themselves, they keep resurrecting. You can easily see this in Camp Banished. When the foe reachs a health threshold it starts casting healing flash several times. It seems that there is a sort of queue filled with the spells, and the foe keeps resurrecting until you kill him in a moment he is not casting the healing spell. This is the opposite of the previous behaviour where the opponent was just dying several times.
|
|
Feature Request | 5303 | No | GUI | Medium | Unconfirmed | Sliss | | Ability to add additional info to buddy list | 02.04.2013 | | 1 |
Task Description
I would like to be able to maintain my buddy list a bit better by adding extra info.
I use the list as many to also locate enemies. But the list gets longer and longer so I would like to add additional info to it. Like the guild when met etc.
|
|
Bug Report | 7889 | No | GUI | Low | Could not Verify | Stalfos | | Items sometimes dropped instead of moved into container | 07.01.2024 | | 1 |
Task Description
When moving items into bags or around within a container it can instead be dropped onto the floor or wall where the mouse cursor landed.
|
|
Bug Report | 8028 | No | Models and Maps | Low | Unconfirmed | Stalfos | | New Dungeon Portal teleports me outside map | 14.05.2024 | | 1 |
Task Description
After a long delay falling outside the map, I am teleported to Levrus or left permanently falling outside the map till I /die.
|
|
Bug Report | 7288 | No | Movement | Medium | Unconfirmed | Sunda Kastan | | Player movement differs from Legacy/no 'turn' keybindin... | 13.09.2021 | | 1 |
Task Description
In Legacy PlaneShift, the default movements are: W = Walk forwards S = Walk backwards A = Turn to the left until keypress ends D = Turn to the right until keypress ends
However in PSU, the movement is as follows:
W = Walk forwards S = Turn 180 degrees and then walk forwards (towards the camera) A = Turn 90 degrees left and then walk forwards (at 270 degrees from camera) D = Turn 90 degrees right and then walk forwards (at 90 degrees from camera)
This is incongruent with legacy movements, but also complicated by the requirement to use the mouse for both UI interaction and movement concurrently.
It may be that this is a result of the absence of a ‘third-person follow’ camera, but behaviour should follow that of legacy.
|
|
Bug Report | 6017 | No | Misc | Medium | Unconfirmed | Thijmen | | problem with registering at the forum | 31.05.2020 | | 1 |
Task Description
when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite? the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).
|
|
Bug Report | 8027 | No | Bugtracker | High | Unconfirmed | Thosor | | Loss of mouse in combat | 13.05.2024 | | 1 |
Task Description
Coming soon…
|
|
Bug Report | 5577 | No | Map Textures | Medium | Unconfirmed | Timil | | Textures Missing in Towns, and Shader Issues | 16.04.2012 | | 1 |
Task Description
Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.
Thank you for your time and attention. ~Timil~
|
|
Feature Request | 6748 | No | User Interface | Medium | Unconfirmed | TrippedOnReality/Enarel | | Filter for storage window | 09.01.2015 | | 1 |
Task Description
The ability to sort in the storage window is awesome. However, it would also be nice to be able to search your storage for a specific item within a category. I think this would mostly be useful in weapons categories, but I can see it being useful for other categories as well. For example, if I’m looking in category: weapons - axes and I want to find all of my blah blah blah of the hammer axes, it would be nice to be able to filter by “of the hammer”. Sorting is great, but if you’re looking for an item with a specific modifier, and it’s not a prefix, it’s hard to find.
|
|
Bug Report | 7589 | No | User Interface | Medium | New | TrippedOnReality/Enarel | | Interface option settings reset at relog | 17.10.2023 | | 1 |
Task Description
In the interface tab of the options/settings menu, some options don’t seem to save at relog.
Items affected: - menu bar size - visible shortcut rows - chat tabs - time stamps - max history
|
|
Feature Request | 6650 | No | Inventory/Items | Low | New | Tuathanach | | Easier way to see quality of items in inventory | 17.10.2014 | | 1 |
Task Description
From Post by apyj13 inhttp://www.hydlaaplaza.com/smf/index.php?topic=41889.msg473672#msg473672 “would it be possible to add a quality “tooltip” on hover so you don’t have to right click on an item when it’s in your inventory to see what quality it is, or perhaps a small number in the corner (similar to what is done with the quantity)?”
Also is it possible to make the numbers for quantity/quality in item slots customisable from skin xmls.
|
|
Feature Request | 6703 | No | User Interface | Medium | Assigned | Tuathanach | Joe Lyon | how code handles missing gui items | 20.12.2014 | | 1 |
Task Description
Would it be possible to change how the code handles missing parts of gui in xml, so it shows an error rather than crashing. example being with page numbers and using an old xml which did not contain them, client currently crashes as soon as you view a book. it would be nice to at least get a message pointing at cause
|
|
Bug Report | 7985 | No | Bugtracker | Medium | Unconfirmed | Tutharel | | Some people are reporting that, after a server crash, t... | 01.01.2024 | | 1 |
Task Description
After a server crash, if you don’t restart your game, your log will no longer be updated with what happens in game. This has been noticed by Gonger, Migg, and a few others.
|
|
Bug Report | 7991 | No | Quests | Medium | Unconfirmed | Tutharel | | when completing a quest with a "choose your reward" sec... | 05.01.2024 | | 1 |
Task Description
when completing a quest with a “choose your reward” section at the end, if you don’t select a reward before clicking “Select a reward” it doesn’t stop you before continuing or give you a default reward, it just completes without giving you any of the possible rewards.
When a friend completed the “Levrus Rat Eyes” quest, she forgot to select a reward before clicking “Select a reward” and received none of the options given.
|
|
Bug Report | 7838 | No | Quests | Medium | Ready to test | Uadjet | | The Arrivals quest cannot be completed | 06.05.2024 | | 1 |
Task Description
The quest has a number of triggers that must be completed in order to progress that do not appear to be working in Unreal. The three I’ve found are:
1) Proximity to the rock with the action location that moves players into the cave,
2) Use of a cog/mechanism, moving one of the rocks, and
3) Solving the door puzzle and entering the small room.
I’m not sure if these are supposed to complete steps that are not sequential with the immediately previous steps, or if they are meant to set variables, but either way they don’t seem to be doing the job. Talking to Raithen gives no sign that you’ve completed any of these tasks, even if you’ve done them all.
I can get players past this by setting a later step manually, but given the (suspected) use of variables or non-sequential steps, it seems likely I’ll just mess things up for them.
|
|
Bug Report | 6528 | No | Inventory/Items | Medium | New | Venalan | Ralph Campbell | Both Hand item flag | 16.07.2014 | | 1 |
Task Description
When you equip an item with “BOTH HANDS” flag an icon appears in only the left or right hand inventory slot, whichever you dropped it in.
As the weapon takes up both ‘LEFT’ and ‘RIGHT’ hands it would be clearer if the same icon appeared in both hands to make it clear that both hands are taken up by one item.
It should also be possible to deequip it from the icon in either hand.
|
|
Bug Report | 6529 | No | Characters Animation | Medium | Unconfirmed | Venalan | | Both Hand item attack/equip animation | 16.07.2014 | | 1 |
Task Description
At the moment two handed items appear in a single hand and use the animations for single hand weapons. There needs to be a new set of equip and attack animations for each race for two hand weapons.
|
|
Feature Request | 6823 | No | Engine | Medium | Unconfirmed | Vonor | | [Engine/Settings] Add Regexp and wordlists to NPC Speec... | 24.11.2015 | | 1 |
Task Description
While the quest system has greatly improved in the years I’ve been gone, there are still things one needs to type to an NPC.
Currently NPCs are still dumb as bricks when it comes to understand what players “write” to them.
As the “writing” is supposed to be “speaking” one would assume that an a person would understand a word even if it’s spelled incorrectly.
For example - in a certain quest you have to tell a certain NPC the words “diamond and opal”.
If you spell the words wrong (e.g. opale) the npc refuses to help and you have no chance of repeating that step and thus are forced to finish the quest in another way.
With regexp in the engine the settings department could make the answer look like this: (?i).*diamond.*opal.*
This would match case insensitive on “it are diamonds and opals” as well as “diamondsopals” or “diamond opale” as well as many other possible phrases that include the words “diamond” and “opal”.
With wordlists settings could define a couple of spellings of certain words to match on in-word typos even. for example: (?i).*$quest_stepX_wordlist1.*$quest_stepX_wordlist2.* In the wordlist the settings dept could then, for example, define spellings like diamond, daimond, diamant and the like. That’s just an example though, I’m sure there are many more examples in game currently where a npc refuses to answer or you break a step in a quest only because you cnat type
As for the regexp, the PCRE library from Apache could be used, maybe. http://www.pcre.org/
|
|
Feature Request | 2189 | No | | Low | New | weltall | | [pawsillumination] zoom support when looking at sketche... | 01.09.2008 | | 1 |
Task Description
It would be nice if it was possible to zoom sketches when looking at them. This would also be useful when you get a sketch/map which is too big for your screen and allows you to have the entire image on screen by reducing zoom.
The included patch allows the user to zoom from 1/10 to 10x the map increasing the size of every element on screen. The buttons used for this are > and < if someone has a better suggestion about them or thinks that having the increase/decrease zoom on screen would be useful i could add them.
http://pastebin.ca/1189613
|
|
Feature Request | 6514 | No | Rules | Low | New | xola | | New item category for kran food | 01.04.2016 | | 1 |
Task Description
food for kra shall have new item category -it mess with alchemy preparations while its toxic for others races
|
|
Feature Request | 7063 | No | User Interface | Low | Postponed | Yorlak | | Shortcuts should be different for each character on acc... | 21.11.2022 | | 1 |
Task Description
Log in with main char. create shortcut log out log in with another char. shortcut created with main character shows on all alternates.
Log in with separate account shortcuts from main account are also transferred to here
|
|
Feature Request | 2319 | No | | Low | New | | | Auto-Create Key For Lockable Container | 01.10.2008 | | |
Task Description
When using /item to create a lockable container, also create a key automatically and place it in the container.
At the every least, just create the (master?) key and put it in the new container.
More complex would be to alter the dialog to allow input of how many keys (in addition to master?) to auto-create.
|
|
Feature Request | 2349 | No | Engine | Low | New | | | Installation Shortcuts | 19.04.2010 | | |
Task Description
Since players rely heavily on log files, and since some files like saved books and screenshots are created by the client in various folders, could the installation package please create shortcuts to these folders in the start menu on windows, and whatever the equivelant is on other platforms? Would certainly make it easier for players to find them when they need them.
Also either set the psupdater shortcut to include the CheckIntegrity flag as default or create a second one with that flag.
|
|
Feature Request | 2658 | No | Inventory/Items | Medium | New | | | giveitem command for players | 26.03.2009 | | |
Task Description
Syntax: /giveitem [PlayerName] [Qty|All] <ItemName> [Any]
Playername is optional, otherwise default to selected target, fail if none selected
Quantity is optional, default to 1, All gives all in inventory/equipped
ItemName required, quotes needed for multi-word item names as in “Platinum Ore”
Any is optional, allows items in containers to be given. Omitting this protects containered items from being given accidentally, allowing players to put things in sacks or other containers that they want to keep safe, same as the Drop command.
Similar to GM giveitem, but with the following restrictions:
player and target must be in touch range
player and target may be sitting or standing
player and target must not be otherwise busy (fighting/crafting/repairing/etc.)
no restriction for target being overburdened (available slot/stack/capacity limits still apply, see Caveats below)
similar to PVP, players should have persistent selectable option for receiving given item(s): Always Accept / Prompt to Accept (default) / Never Accept
Along with the command, make Give an option to context menu, which opens a slot window same or similar to that which one gets when giving to an NPC.
Justification:
Caveats:
Makes using mules a little easier, as in an unattended mule with Always Accept can become a dump bucket for loot or Ore, however current trade rules allow this already, the only difference is that the mule must be attended to complete the trade, while not for receiving a Give. Eventual random spawns of monsters will mitigate this for loot, and miners still have to move all the collected ore to wherever it is to be processed or sold. IMHO the benefits to RP outweigh this issue, since miners have already worked around unattended trading to some degree, either by mAlting or dropping stacks while guarding in proximity.
Extending the idea, add a die-roll chance for target and near proximity observers to be made aware of the exchange. Giver’s Int. and Agility should apply, and Target’s Int. and Observer’s Int. should apply but I’ll leave it to devs to work out how to implement. Any exchange that is more than 1 single item should incrementally raise the chance of being observed. One might still have a good chance of slipping a couple daggers into someone’s pack, but a stack of 20 Ore would be nearly impossible not to notice. Sleeping target might also factor in.
A further extension might be an optional Sneak parameter whereby the Giver attempts to be especially discrete in the exchange, thus lowering the chance to be observed by the target or near proximity observers, but this should be mitigated by quantity as above.
|
|
Bug Report | 4369 | No | Sound | Medium | Assigned | | Mathias | Sound Bugs Effects/Spells/Etc | 14.08.2010 | | |
Task Description
List of all bugs regarding sound to be fixed for next release.
|
|
Feature Request | 2951 | No | GM System | Medium | New | A. Kiefner | | /petition improvements | 28.06.2022 | | |
Task Description
1. Ability to teleport to the player from the petition window 2. Player side: /petition should open the petition window with a short introducing text (in another text window?) how to use the petitions (not to post wishlist items there, how to use (possible) categories..) 3. There should be a drop-down menu for selecting a category [Not Specified; Movement; Bugreport; Name; Event; Harassment; Quest; Miscellaneous] to classify the report. This could be used for statistical purposes post-process as well. 4. A button to mark the petition as URGENT which will add a parseable <star><star> URGENT<star><star> (<star> = *)to the header of the petition so our post-processing tools (aka gmbot) can forward/poke outside the game. (This is important!) 5. Before the petition is finished there should be a preview to check everything again, to make last changes. 6. As long as the petition is unassigned the button shows “claim”, once claimed the button shows “release” to unassign the petition again.
Request from FS#3092 :
“In the GM petition window, there should be a button ‘Guidelines for petitioning’ and when you click it, it gives just that. Guidelines for petitioning.
I recently filed a petition and didn’t know what to include, what was superfluous, whether it was too long winded or not, etc.”
Request from FS#3101 :
“We need enhanced petition system to allow adding several notes and note titles, as well as ability to review closed petitions. The ability to add several notes to a petition would also help us handle an issue, then log off, but leave notes for other GM’s to review what we have done and pick up / complete.”
|
|
Feature Request | 6181 | No | Pets | Medium | Unconfirmed | Adam | | MOUNTS: System Alert Sound/Message In CHAT (SYSTEM TAB)... | 08.10.2013 | | |
Task Description
When a player summons a mount (creature to ride on), eventually the creature disappear depending on how high Empathy skill is.
When trying to use the RING Of SUMMON FAMILIAR again, it says it's depleted and can't be used.
Please kindly create an ALERT in the MESSAGE TAB of chat telling player how much time remaining is left to wait for the ring to be used again with a countdown and then a sound effect that reminds the player that magical energy is now regenerated in ring.
|
|
Feature Request | 6182 | No | Training & Skills | Medium | Unconfirmed | Adam | | Stats And Skills Menu (Skills Not Yet Implemented Color... | 11.10.2013 | | |
Task Description
Many Skills are NOT yet implemented, which is perfectly understandable.
Please kindly HIGHLIGHT with another color (representing NOT YET IMPLEMENTED) which skills have NOT been worked on yet.
This will greatly help ALL players know which ones are full completed and which ones are not, especially NEW PLAYERS who won't waste time trying to figure out what has not been worked on yet.
Recommended Color: Bright Purple (easy to see and readable)
|
|
Bug Report | 6373 | No | Models and Maps | Low | New | Adam | | Guild Keys 3D art shows as a pouch bag | 02.04.2014 | | |
Task Description
At the moment the guild key does NOT show up as a key when a character is holding it. It shows up as a pouch bag. Please kindly switch the image for a actual gold key just like shown in inventory.
|