PlaneShift

Similar but not identical to FS#7871

Four trees growing in the center of the riverbed at /pos
raurim_area 632871.68 -471483.83 9353.26

Although not impossible to have them grow in the water, it’s highly unlikely they’d grow at the center of the stream.

ojaroad2 457484 -324254 12385

Also says in Main chat “Guild Member just joined Planeshift” yet has a No under Online.

The first time a character does With a Way Levrus asks what thier favourite way is then there is an option of “Sure, you already told me about Circles” which Levrus does not recognise.

A server crash happened while I was inside the Ash Brotherhood Lair.

On restart the stone in the doorway had been reset in its closed position, and I was effectively trapped inside, without a way of triggering the mechanism to re-open the passageway.

There should be a second trigger/gear/switch on the iside.

Spells that are meant to visually change the player’s appearance (read mesh) don’t work anymore.
(i.e. Gorwealform, Polymorph)

If you remove one or more items with a given quality X from a container,
with the command /takestackall or the respective button
while holding another item of quality X in your hand,
the stacking occurs in your hand-slot, even while you are working on the item in that slot.
Thus work done is being interrupted.

Be able to see several text lines in all chat windows after returning from a crash or logging out.
This was available in Legacy. Can it also be available in PSU?

There’s a minor map glitch in Jayose library.
On the ground floor there’s a patch of grass blades floating between the shelves in mid air.

I have been trying to place decoration and a book onto the stone block in the entrance area of the guildlaw map (our guildhouse instance of it)
A weapon as well as the book have disappeared inside the map geometry instead of on the surface.

Without command line support for targetting comparable to what we used to have in legacy (/target next item) I don’t see any way of retrieving an item lost this way.

You are supposed to be able to go see Niala, but the door does not work if you haven’t already got house of power access.

It might make sense that an Ynnwn has to crouch in order to get through a Klyros built door, but when Klyros are struggling to pass many doors in their own city, that doesn’t make any sense.

Many doors are too narrow for my Klyros character to pass through. Same holds for some of the decoration, like the kiosks in the market hall with an awning that is too low to look at the wares on the table.

I think 20-30% larger scale would be sufficient to remedy the major trouble spots.

Death animations play inconsistently for several NPCs. ex. Rogues in Oja and Cutthroats on Ojaroad, forest aragama on the road between the magic shop and Hydlaa.

Sometimes the animations will play, but most of the time they do not.

no task description

If you take a rare looted item out of a bag, try to equip it, but can’t because of Stat requirements, then train a stat, drop the bag and pick it up again, the item disappears.

Then if you try to store it there are 2 copies, and the server crashes if you store them. Item lost after restart.

Crash and item loss can be avoided if you relog before storing.

Since you can now only wield Shields left-handed due to what I mentioned in bug 7867, only the right hand trains one handed weapons, and two handed weapons give half the training in either hand.

Certainly happens with Sapphires, making q300 Enchanted Sapphires gives no practice in a way.

The four Onyx Dagger members who share the hall with two Grendols do not respawn once killed.

It has happened to me a dozen times over since joining UR after it has replaced legacy, I relogged inside a guildhouse/law map and I am eternally falling for having spawned slightly beneath floor level.

In several instances I had to wait hours for a /tp back to the map, and so it is happening again today.

Please make a quick fix of this enabling players to teleport themselves back to the map in such a case. It’s a real downer to have to wait for a long time in such a case, particularly given the fact that you probably have to stay online for a GM to /tp and fix this. Huge waste of energy with the constant 3D animation.

This could also be of help if players are trapped in map geometry, inescapable pits, rifts and so on.

In some quests there is a delay before you can talk to an NPC again. One example of this is Its Gone Bad. In Legacy the players got a message like “You have to wait for 10 minutes before you can continue this quest.” so that they knew what was going on, but in PSU they don’t get the message.

Admittedly, the message is very OOC, but without it there’s no way for a player to know why they cannot proceed with the quest. If the messages cannot be restored, maybe a line of dialog from an NPC saying that they’ll have more to say later?

With

- a skill level of 218 (i.e. 186 natively)7
- an unpolished speciment of Q300 to work on

I created a final result for an enchanted gold necklace of Q126

This is an extremly unrealistic random outcome.

when completing a quest with a “choose your reward” section at the end, if you don’t select a reward before clicking “Select a reward” it doesn’t stop you before continuing or give you a default reward, it just completes without giving you any of the possible rewards.

When a friend completed the “Levrus Rat Eyes” quest, she forgot to select a reward before clicking “Select a reward” and received none of the options given.

when I run around the world, my max stamina decreases as the same rate as my actual stamina. It really isn’t a crazy issue as everything works normally but when looking at my stamina as it decreases, it seems to be full the entire time until it finally just disappears and I’m suddenly unable to move.

When crafting, the stamina bar works as intended with the max stamina never changing and only my actual stamina decreasing.

The version affected is 0.7.40, unavailable as an option in the FlySpray configuration.

If you have the right amount of raw materials for a crafting process, but they are not in the same stack (for example because you almost used up one stack with other crafting before and you have another full one) the right amount of items gets transferred into the container, but in two separate stacks, the crafting process accordingly fails with the message that there isn’t the right amount of items and ultimately if you don’t notice the message you are wasting the correctly attributed raw material.

While preparing Terevan Berry Wine Saauce (as part of Octarch’s Delight) The “Prepare” button picks either mortar and pestle as the container to be used or the wooden bowl, depending on where my character is standing (in Reffitia’s Kitchen).

Both are too small to hold all items that are needed to combine “Unmixed Terevan Berry Wine Sauce”. Maybe container size should be a criterion more than distance.

Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening.
My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.

If you are in a location that has both fishing and harvesting available, if you successfully harvest an item and do not move, but switch to fishing you get a warning saying “You cannot fish in the same place twice” even though you have not fished at this location.

If you successfully catch a fish and do not move, but switch to harvesting you get a warning saying “You cannot harvest in the same place twice” even though you have not harvested at this location.

This is probably true of mining if there are area overlaps, but I have no idea if this actually exists anywhere.

example location for fishing/harvesting: /pos 109482 -757679 20767

The quality of items shown during mouse over is one lower then the actual quality shown in info box after right click.

https://media.discordapp.net/attachments/1237535495794331678/1238899389456715866/image.png?ex=6640f678&is=663fa4f8&hm=d7f1b3022cf4c8409a9c985616191c0364b54b2fd2b13e15c8f283659a7f9c5b&=&format=webp&quality=lossless

When riding on a Rivnak the left back of male Klyros model becomes transparent.

Players who have done the Order of the Keen Edge quests do not seem to have their faction points calculated correctly. Players who have done the quests seem to have their faction listed as 0 (Ignored). I checked the quests, and no faction points are awarded by the quests, even though my logs show that faction points were given. Currently, the quests only give faction_level.

When shooting at live target, tab, get red reticle, seems fine. When target dies, or you miss, you get split white circle.

   You cannot click anywhere on screen, quit or chat. If you are windowed, or alt/tab to another window, you can X out the window. This was proven during the 240511 event with other players, me on Linux, another user on Mac.

I have had this problem since PSU, thought it was me, and previously on another Windows machine.

   Could not reproduce on dummies in arena, It did happen on dummies in event.
   This is new draft, will complete soon.

This task collects the crafting feature requests.

Once you’ve maxed your stats, currently there’s no more use for progression points/XP. It’s just an endless counter going up and up and up.

How about:

• adding PP prices to the money you have to pay in special attack quests? (”Sorry, but you don’t have enough experience to learn this, come back later and I’ll show you how it’s done.”)
• having to pay in PP more than in Tria for the temporary knowledge bonuses?
• consuming progression points if you craft something with a special modifier (and in turn only allowing you to do so if you have some to spare)?
• add more temporary buffs (for example for stats or more directly as bonus HP/MP, increased HP/MP regeneration) that are paid for only in PP or with much lower tria costs.

I am aware that it probably requires quite some additions to the quest scripting and other places and is by no means a trivial change, but I thought it may add to the medium- to long-term development deliberations. To me progression points feel like a loose end, now that they lost their purpose in skill training.

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

we need a facility to allow morph, scaling, settrait and related commands to be in effect for the current login -OR- persist across logins -OR- permanently change the base character. Obviously there should be appropriate permissions requirements especially for changes to the base.

commands to save or load a character stored in an xml file. Should be able to specify short term, persistent or base level characteristics.

I’ve updated the bug to reflect what is happening with the current code, r9606

At the moment the following option will show “red apple (1 of 2) (1/2)” and “red apple (1 of 2) (2/2)” for the menu pair Menu: no. Menu: yes.

…

P:RA.
Menu: bla.
Smith: wana help.
P:RA1. P:RA2.
Menu: no. Menu: yes.
Smith: shame.
Smith: good.
Complete red apple step 4.

It seems there are now duplicate code checks for counting subsets, or duplicate displays of one counting. This option should really show “red apple (1/2)” and “red apple (2/2)”.

Also now, when you have 8 menus visible from many different quests the number shown is (1/8)-(8/7) so it is done on a total number of menus available, not on a by quest basis. For example, if you have 3 quests active and 8 steps the numbering could be (1/3)(2/3)(3/3), (1/2)(2/2), (1/3)(2/3)(3/3)

I would be nice to have the option to set the filter string to “item names” or “processes”. Such that you could search for an item “battle axe” and only see the steps under the heading “battle axe*” or search processes for things like “apple” and see every step that uses an apple.

As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.

Potentially related

It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.

I can make this happen by following these steps.

1 - Button height to minimum
2 - button width to manual (and moved to minimum)
3 - button width to auto
4 - set button height to max
5 - button/icon width is fixed and when you change name↔icon you get the broken display

If you don’t follow these steps the width for change between icons and names works correctly

test case

test case

• I was playing my pan flute.
• I swapped the pan flute against my plat steel sabre.
• I stopped the playback.
• I fought.
• I wanted to reequip my pan flute, but it could not be moved, not even from one inventory slot to the other.

I suspect that there is no test for (music instruments/)items being in use when swapping them

Courtesy of Rigwyn, on forum wishlist http://www.hydlaaplaza.com/smf/index.php?topic=42019.msg474950#msg474950

  The player would define a starting state, a series of "qualifiers" controlling a custom menu of "actions" that may be taken on the object.
  Qualifiers could check attributes, skills, possession of an item, or internal counters.
  Each action could execute one or more commands, for example /shout, /say, or /tell to the person who acted on it, or update its description or internal counters.
  All descriptions and internal counters would be shared to all clients within range as well as persist.

When you equip an item with “BOTH HANDS” flag an icon appears in only the left or right hand inventory slot, whichever you dropped it in.

As the weapon takes up both ‘LEFT’ and ‘RIGHT’ hands it would be clearer if the same icon appeared in both hands to make it clear that both hands are taken up by one item.

It should also be possible to deequip it from the icon in either hand.

When a male nolthrir is mounted on a rivnak his legs stick into the rivnak.

Example found in all Alchemist items, example Alchemist Freezer

Error on console is:

Error in ><let> bindings<: Given a NULL iScriptableVar* for >RightItem<.

The scripts are run through : ApsCharacter::InvokeAttackScripts()

The first thing is to execute this script part:
   RightItem=Attacker:GetItem(0);
   QuaLevel=RightItem:Quality/50;

 In a similar case with GetItem(0) but outside of <let> we get MathStatement::Evaluate() with RightItem=nan , it works.

We have potions that improve stats, we have potions that improve magic skill, how about potions that improve combat skills and job skills? make alchemists have a little more value :)

I crafted two bows, the NPC-Price for the Enkidukai Shortbow (needs lvl 20 in bow making and more material) seems to low.
Enkidukai Hunting Bow, Q170; 1588 Tria
Enkidukai Shortbow, Q193; 1531 Tria

Weapon types that I’d find useful in RP and could be more-or-less stood in for with existing art, but aren’t statted/craftable:

• Rapiers/some sort of thin thrusting sword – this could use a longsword model for now until we get a proper rapier model in (I might make a low-fi rapier model if I get motivated enough to dust off Blender, even…)
• Spears (and perhaps other polearm forms) – these can use the quarterstaff model until a proper model is implemented for them

floating building located here: -335500.28 -590858.44 18368.43