PlaneShift

The new player to Hydlaa from the BD come with some maps given. Basically 2 x maps, 1 is Hydlaa main city map and 2 is East Hydlaa. Both these 2 maps i found in my Inventory just after arriving in Hydlaa Plaza with my new Characters. The issue/bug is just can’t open or use the map. The right click of mouse on the map does nothing. And as the rt clk does nothing so the option of clking the ‘use’ icon is definitely not there, plus the map cannot be drag and dropped in the black area in middle of the inventory. Thus No map drawing to be seen, as was in legacy and No addition of Map to the compendium.

Any other commands are deleted

While the tavern’s kitchen in Amdeneir has all the smaller pieces of equipment, the tables and stove they are standing on don’t offer any interaction to open an oven, a grill or a preparation table respectively.

I’d expect there to be at least a preparation table accessible.

The NPC interaction window can only be controlled via mouse clicks, which is extremely cumbersome – particularly giving the full screen scale – bordering the unintuitive for some parts,.

Going back and forth between the menu entries and the dialogue window to click the progression arrow is cumbersone as well as leaving the view (and here we are extremely unintuitive) with a mouse click in the corner, instead of supporting the Escape key.

My proposals (ranked by importance, most important first):

1) allow for exiting the view by assigning the ESC key to the leave button
2) allow for dialogue progression by hitting the space bar (having your character jump in this view is really an expendable “feature”) or at least have the arrow key right assigned to that right pointing arrow appearing under the lefthand dialogue section.
3) selecting conversation options on the right-hand side via numbers 1-9 (range should suffice for 99% of the present cases).

It says the pet has successfully targeted the creature , but will not attack with /pet attack. This is on One-Eyed Rats that can be killed by player, shows the same error on Kikiris mind you, that can’t be killed by player.

ojaroad2 457484 -324254 12385

Be able to see several text lines in all chat windows after returning from a crash or logging out.
This was available in Legacy. Can it also be available in PSU?

I have been trying to place decoration and a book onto the stone block in the entrance area of the guildlaw map (our guildhouse instance of it)
A weapon as well as the book have disappeared inside the map geometry instead of on the surface.

Without command line support for targetting comparable to what we used to have in legacy (/target next item) I don’t see any way of retrieving an item lost this way.

After dropping several valuable items through world geometry without a chance to get it back I’ve got an idea to add a confirmation dialog for drop action.

(16:59:00) [chat] >You cannot cast Fist of the Volcano on Eagle Gobble Hut. You can only cast it on living enemies.

If you can destroy the hut, it should also be possible to apply destructive magic. A living body should be the greater obstacle for magic to overcome when compared to inanimate objects.

The forge at Gardr’s smithy does not offer the usual interaction button when opening the container window. There are simply no buttons.

after speaking with Sysial you are teleported to the dryken plane instead of the proper location

when I run around the world, my max stamina decreases as the same rate as my actual stamina. It really isn’t a crazy issue as everything works normally but when looking at my stamina as it decreases, it seems to be full the entire time until it finally just disappears and I’m suddenly unable to move.

When crafting, the stamina bar works as intended with the max stamina never changing and only my actual stamina decreasing.

The version affected is 0.7.40, unavailable as an option in the FlySpray configuration.

If you have the right amount of raw materials for a crafting process, but they are not in the same stack (for example because you almost used up one stack with other crafting before and you have another full one) the right amount of items gets transferred into the container, but in two separate stacks, the crafting process accordingly fails with the message that there isn’t the right amount of items and ultimately if you don’t notice the message you are wasting the correctly attributed raw material.

For a while I have been trying and failed ot make Octarch’s delight and Lionfish Souflee.

In both cases the mixing in a wooden bowl didn’t work.

The new crafting interface now shows that there is baking skill required in both cases which doesn’t make sense given the tool set or the recipe book involved
.

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

Many recipes try to achieve one end product from one main ingredient and if crafting transformations yield several intermediary products they often are used collectively in the same amount to process further. That observation leads me to believe there was is a mistake in the recipe for Octarch’s Delight.

A fish is cleaned and cut into 2 Filleted fish

I would assume the final product therefore to make use of 2 Filleted Fish together with 1 each of the rest of the ingredients to combine into one Unmixed Octarch’s Delight.

instead

I find only 1 Filleted Fish goes into the mix but 2 sauce items do. This does not make a lot of sense and so I am suspecting a mix up in the item quantities with this crafting step (Combine … into Unmixed Octarchs Delight).

Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening.
My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.

Making “Set of Steel Plates”. The button “Check Prerequisites” does not make “Prepare” button visible although I have a “Heated Set of Steel Pieces” in inventory. When equipping a “Heated Set of Steel Pieces” into left hand I can shape it into “Set of Steel Plates”.

I just completed ‘making a metal stock’ quest from Harnquist with my new Alt Char But did not received the crafting book ‘Working with Stock’, instead the next quest titled ‘Learning blade making’ has popped up. I think it sure is a bug.

This is most limiting when trying to juggle multiple containers (such as the furnace and the stock casting) at once.

Fri Dec 19 09:55:20 2014, <src/common/paws/pawsimagedrawable.cpp:69 PreparePixmap SEVERE>
Fri Dec 19 09:55:20 2014, Could not open image: >Scaling Field Background<
Fri Dec 19 09:55:20 2014, Fri Dec 19 09:55:20 2014, ART ERROR: PawsTextureManager wasn’t able to load the requested image: Scaling Field Background

This bug occurs on a fresh install of the Linux 64 bit 0.6.1 client, after update to 0.6.2.

The machine is a Lenovo T430 running Parabola GNU/Linux-libre.

lspci:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

sudo lspci -s 00:02.0 -vvv:

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])

Subsystem: Lenovo Device 21f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Address: fee00018  Data: 0000
Capabilities: [d0] Power Management version 2
	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915

uname -srvmpio:

Linux 3.17.6-gnu-1 #1 SMP PREEMPT Tue Dec 9 04:18:43 UYST 2014 x86_64 unknown unknown GNU/Linux

If you try to equip an item from a container into an invalid slot, the item becomes invisible till you reopen the container.

Approaching Stalg does nothing to the quest, can’t complete.

While running parts of the hair seem to bob up and down without being attached to the rest of the hair, more noticeable while sprinting

I could have sworn when I created my Ylian character in legacy it had a dark beard, it shows up with a dark beard in legacy; in unreal the character’s beard shows up as blonde. Seemed peculiar

Add a better way to search for icons. clicking through each individual icon in a long list is fairly annoying for some of the larger categories, and there are several icons that are blank so it’s not always clear there are more icons after that. Being able to see more than one icon at a time/being able to filter by name or type (ways for magic, weapon types for weapons, tools, music, decorations etc.) or having more categories with shorter lists would also be helpful.

items inside the mail window have no weight/quality/size.

Steps to reproduce:
1. go to a fast travel npc and click on mail
2. click on write mail tab
3. place item(s)/coin(s) in the mail window
4. hover over items

persists in received and sent tabs as well. You can send mail to yourself to test.

In the skills window, the scroll bar doesn’t works with scroll button on mouse in all tabs. Works as expected in the Stats and Combat tabs. Does not work in the Magic, Jobs, Various, or Factions tab. The scroll bar needs to be manually grabbed and dragged to see the rest of the window.

The scroll bar also doesn’t scroll down far enough in the factions tab and in order to see the very bottom of the tab; the window has to be resized to see the bottom.

When looting a monster, there is a system message in main chat saying “<mob> has no money to be looted” when you click “loot all” even if the monster does have money to be looted instead of the correct system message which should tell you how much money you looted (the amount of money looted could also be added to the loot window as a quality of life improvement).

If the monster doesn’t have any money, then there are two system messages in main chat saying “<mob> has no money to be looted”. One appears when you open the loot window, and once when you click “loot all”.

Dragging a glyph from an inventory container (e.g. sack or glyph sack) into any slot in Spell Research window causes the glyph to disappear from the container until window is re-opened.

Steps:

- Open Spell Research window from “spellbook”.

- Open glyph sack and drag glyph into any slot in Spell Research window. (Try to use Research or Way slots. Purify Glyph slot only reproducible if right hand has item equipped.)

- Glyph seems to have disappeared from container, but will reappear if window is refreshed.

Additional info:
Dragging glyph from glyph sack on the ground to Spell Research slots puts it into inventory.
Moving a glyph from inventory into Purify Glyph slot equips the glyph in right hand but does not begin purification.
(Not sure if these features are conflicting with spell research.)

Font size in settings for “Speak with NPC Text” or “NPC Response Text” cannot be changed.

you can walk on water at this river: cup_of_laanx 717636.88 -659357.94 10930.61

Can’t tell what time it is in Yliakum

When swimming underwater and looking through the water to things above water, everything has a water blur effect except for the leaves on the tree located here: ojaroad1 322214.06 -357065.16 15257.09

There is tiny unreadable text in the Main tab of the chat, if you have font size 0 for Chat Text. Any chat that comes after it is fine, and it becomes readable if you change Chat Text Size, even if you change it back to 0 again.

It is the “<Player> just joined PlaneShift” text

In the old version, there was a small inventory without the character part. It could be useful for trading etc.

These 2 values for experience should be merged for a less verbose log.

Similar but not identical to FS#7871

Four trees growing in the center of the riverbed at /pos
raurim_area 632871.68 -471483.83 9353.26

Although not impossible to have them grow in the water, it’s highly unlikely they’d grow at the center of the stream.

When using an enchanter my character is digging or lunging.

This should be the same animation as spell casting IMO.

Also says in Main chat “Guild Member just joined Planeshift” yet has a No under Online.

There’s a minor map glitch in Jayose library.
On the ground floor there’s a patch of grass blades floating between the shelves in mid air.

Death animations play inconsistently for several NPCs. ex. Rogues in Oja and Cutthroats on Ojaroad, forest aragama on the road between the magic shop and Hydlaa.

Sometimes the animations will play, but most of the time they do not.

The fishing animation for the female stonehammer reels in the rod with the right hand, but the reel on the rod is for reeling with the left hand. This may affect other character models as well.

Certainly happens with Sapphires, making q300 Enchanted Sapphires gives no practice in a way.

There are gaps along the road or at the base of buildings at these locations in Amdeneir:

Amdeneir -348976 -595451 18804

Amdeneir -347532 -596049 18814

Amdeneir -346446 -593819 18821

Amdeneir -346293 -592665 18807

If you are in a location that has both fishing and harvesting available, if you successfully harvest an item and do not move, but switch to fishing you get a warning saying “You cannot fish in the same place twice” even though you have not fished at this location.

If you successfully catch a fish and do not move, but switch to harvesting you get a warning saying “You cannot harvest in the same place twice” even though you have not harvested at this location.

This is probably true of mining if there are area overlaps, but I have no idea if this actually exists anywhere.

example location for fishing/harvesting: /pos 109482 -757679 20767

When an NPC wants more than one item, but you have the items in different slots (even containers, like when your inventory is full and you can’t easily make room for the full stack), the trade won’t complete, even if the total sum of all items traded is the right amount. It should not matter if you give an NPC a stack of 63 items or ten stacks of ten items plus one of three, or seven of nine( ), etc..

Edit: they also don’t get given the items when they’re in the right amount but in different stacks / sacks in the inventory. One gets “You have to give manually, because you got too many items” instead. /Edit

At the moment, there is no way to get a players attention if (s)he is not watching PS. I think there should be an extra sound (settable via options) that is played whenever somebody receives a tell and/or whenever somebody’s name is mentioned. Maybe these should even be two different settings in options.