It might make sense that an Ynnwn has to crouch in order to get through a Klyros built door, but when Klyros are struggling to pass many doors in their own city, that doesn’t make any sense.

Many doors are too narrow for my Klyros character to pass through. Same holds for some of the decoration, like the kiosks in the market hall with an awning that is too low to look at the wares on the table.

I think 20-30% larger scale would be sufficient to remedy the major trouble spots.

There are gaps along the road or at the base of buildings at these locations in Amdeneir:

Amdeneir -348976 -595451 18804

Amdeneir -347532 -596049 18814

Amdeneir -346446 -593819 18821

Amdeneir -346293 -592665 18807

Not sure if this is possible, but seeing as how the names are treated more as actual names and less as usernames, I believe there should be some support for apostrophes or dashes in names.

For instance (some common fictional apostrophized names)
Teal’c
T’Pol
Kal-El
Jor-El

Perhaps if the apostrophized version of names are only for “display purposes”, so if you see someone named T’Lara, their name is stored as a “key” in the database as tlara, and people can access their name (for instance with /tell) using Tlara, but for display purposes, their name shows up as T’Lara.

Not important, just a thought…

When defining keys, it is currently not possible to use key combinations or extended keys of the keyboard. PSU should be able to handle them.

I am sitting in the gold mine near ojaveda and another player is hunting the ‘nauts. one of them runs away from his attack and starts hitting me. I get a few messages about those hits then a message that I have to be grouped with the other player when my auto-retaliate kicks in. This is not right. It is the behavior that has been implemented but I should be able to attack anything that is attacking me.

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

Please allow additional rows for the shortcuts as well as more shortcuts per row. I utilized shortcuts quite a bit in the legacy game and I liked the ability to have small icons with a ton of shortcuts. This will probably need to be a setting to input the total number of rows and the number of shortcuts per row. The icons would need to scale to fit. Thank you for your consideration.

Chat for the alliance chat tab goes to the main tab.

with alchemist fire/freezer equipped → attack npc
chat responds ‘You have no weapons equipped’

i have been checking this spawn point for chests for a while. when last update was completed i cleared the adorned crates from the area, which numbered 3 in the stack. today after a check i find another 3 stacked neatly with no offline looking chest suggesting a player moved them. i believe these chests are spawning too high and thus we get a repeat spawning until they appear at the spawn point.

/pos 533371.69 -366812.44 15751.50

Currently storage is sorted alphabetically which is fantastic.
if we had additional sorting by quality that would be even better, often i’m picking through my materials for the best or the worst of something when i’m crafting. if we had additional sorting by quality this would be so much easier.

Right now, the only jewelry metals available in the game are gold, silver, and platinum, which leaves Ynnwn out in the cold RPwise. Considering that IRL, copper alloys (brasses and bronzes both) were and are still used for jewelrymaking – it would be logical to add those at some point down the road, to provide at least *one* Ynnwn-compatible option…

You already mentioned that the former “Dweomer detection”, which only vaguely returns a possible enchantment of a weapon, is rather useless as there are also buffs which are not at all obvious regarding stats and skills.

Not to waste the spell in general, I wonder if it was possible to implement instead that a similar one could be used to detect the presence of natural resources. Depending on some experience level, possibly in combination with another glyph (e.g. Earth, Animal, Tree), it could enable the caster to only vaguely detect presence of areas in a more or less close range where mining, fishing, harvesting, etc. (generic type) might be possible (”You feel that harvesting could be possible here.”), up to a more detailed feeling that specific resources are probably in some vague but graduated distance (”You feel that fishing for carp could be possible just next to you.”).

Of course, any new spell could be created as well.

As the title suggests if you add a name like;

Venalan

And you then edit this to say

Venalan “dev”

When you load the client next time around the " will have broken the aliases_name.xml file so none of the added name notes will show. It is because you end up with the following in the xml file

<alias name=”Venalan” alias=”Venalan “Dev”” />

the extra [dev”“] is an unknown component of the <alias /> so breaks the whole formatting of the file.

Adding 3 lumps of butter to the Preparation Table next to Orchibaly in Oja, seems to cause the server to crash. One and two lumps at a time work as expected.This has happened a few times today, but it may be possible that a DEV is also working on something at the same time.

It would be convenient if you were to do a /who Timmothy and I had autoreply on it would return

Timmothy [Away] Guild

Currently, I find the /away command rather useless, as you’d have to /tell the person who’s away, not knowing for sure if they’re even away. But with it in the /who, you can find out if someone is away, then send a /tell to find out the reason/how long.

Related to FS#2436

Currently when leaving PlaneShift, the only option is to completely exit the client. It would be convenient to be able to go back to the character selection screen and/or the login screen rather than having to restart the client.

seeing that furnature is one of the heavest item types in the game, redecorating guild halls can become tedious and god forbid things get cluttered it is not possible to eaisly move them to storage. my request is that typing /storage will work inside a guild hall as if you were targeting a storage npc. just for convienance sake.

i would like to see an overload for /mount where you can simply call /mount <petname>

if the pet is not in world the pet will be summoned and than targeted automatically prior to the mount command.
if the pet is listed as summoned the command will attempt to target the pet prior to mounting.
if the pet is in world but out of range the command will give the normal error for being out of range.

With a plenty of crafted and looted weapons and armor around, there is a need for some basic identification service running by NPC (e.g. Levrus).

To make a ground for an business and relations between real players, NPC identification service should be:

1) expensive
2) less than 100% successful (how about 75%?)
3) limited by item quality / price

It would be useful to have some knowledge areas accessible through the drop down dialog system, perhaps behind a chooser toggle "quest/knowledge area"
The dialog could default to quest dialog always opening the list window with the no-quest error in place of the list if there is no relevant quest dialog and a button for showing the KAs. This way the useful information the npcs have is not lost unless you know exactly what to ask them.

Sometimes targeting certain npcs after they’ve died can be trick/frustrating (particularly rogues/cutthroats etc after die animation). It would be nice if you’re in range of a dead npc and you press the “E” key, that it would either open the loot window automatically (instead of opening the dialogue window or doing nothing, depending on npc type) or open the context menu with the loot option (which already exists, it’s just on right click only which is slightly annoying because I frequently lose target on the dead npc when right clicking or navigating to the NPC’s body if I’m farther away).

while speaking with an advisor eariler today he had instructed my to come to the bugtracker here, but had made a typo in the link pointing me to “http://www.hydlaaplaza.com/flypray” which I had cought and corrected before coming here. As it stands, I’m very familiar with FlySpray from working on other projects so the typo was trivial for me, but other players might not be so keen. I think an easy way of “fixing” the issue of typos for common resources would be to allow Advisors to have encapsulated snippets containing the links. a few examples would be;

(fs) would be replaced with http://www.hydlaaplaza.com/flyspray

(forums) would be replaced with http://www.planeshift.it/forums.html

(guide) would be point to http://www.planeshift.it/quickstart.html

Etc, Etc..

I don’t know exactly what languages the PlaneShift client/server uses, but if it uses Python this would be a fairly trivial addition.

For folks who have older computer systems, sometimes the only way to get PS to work is to have setting on lowest and have weather turned off. But weather is a good RP point so it would be nice to be able to tell what weather is happening even if you can’t see it. It would be nice to have that information next to the time in the information window, or if that isn’t possible, perhaps a command query /weather that will return the current weather of the sector you are in.

Moved from ticket 5981, suggestion by Franta

it would be good to implement command with list of all public channels with something like /list [filter]. It would also show all channels you are joined with the corresponding number.

Example:
/list
gossip (talk with /1 <text>)
auctions (talk with /2 <text>)
hydlaa_chat (not connected)
gobble_hunt (not connected)

the same list with filter as parameter:
/list go
gossip (talk /1 <text>)
gobble_hunt (not connected)

the same list with special case for only connected channels:
/list #
gossip (talk with /1 <text>)
auctions (talk with /2 <text>)

Just a Quality of life improvement due to the current setting conflict between weapons that must be equipped to provide a stat bonus and the IC issue with holding weapons in a city. The implementation of this should be a command of /Sheath and /Draw on execution of /Sheath any weapons carried by the player will be re positioned to the characters back or belt and appear to be sheathed. When sheathed the weapons will still be present in the players equipment slots and continue to provide any stat bonuses or other magical effects however the city guards will no longer react to characters as though they have weapons drawn.

/Draw returns all sheathed weapons to the players hand

being attacked or entering combat stance will automatically Draw any sheathed weapons

I would like to see 2560×1440 added to the list of monitor resolutions in the launcher.
For example:

Index: src/pslaunch/pawslauncherwindow.cpp

   }
   else if(ratio == "16:9")
   {

       resolution->NewOption("1920x1080");
       resolution->NewOption("1366x768");
       resolution->NewOption("1280x720");

As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.

Potentially related

It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.

I can make this happen by following these steps.

1 - Button height to minimum
2 - button width to manual (and moved to minimum)
3 - button width to auto
4 - set button height to max
5 - button/icon width is fixed and when you change name↔icon you get the broken display

If you don’t follow these steps the width for change between icons and names works correctly

Scrolling with the mousewheel does not work if the mousecursor is over one of the listed buffs.
It works only if the mousecursor is besides or between the buffs.

svn code r9595

all potions I tested results in a diamond crystal icon in the active effects bar.

The grill in Reffitia's kitchen in Brado's tavern doesn't behave like other items in the kitchen: The preparation table, for example, is selectable and has a label. The grill is not selectable, and it has no label. One can interact with the grill (e.g., store something in it) just as with the preparation table by right-clicking it. But the grill is much harder to identify, since it has no label.

the gm /item window has many items listed in it, it would be much easier if you could just type the name of the item needed and it would show you the 3d mesh and the icon as if you had found it in the catagory selection section. this is very helpful for trying to see what something looks like without having to spawn it. as more and more items start to be added to laanx less and less people will be able to use the /item window to find items and will use /item <name> instead but that is a waste if they just want to view an item and have no use for it.

When i first enter in the guild house, i inspected the arounds to remember what i had already seen in the pasts months , the pics and so :}

But i was disappointed by the fact that i cant close the door :( i mean by the inside..
i take the example that one of my guildmate invited her husband in it but then she had to go out to lock the door and enter it again. (OMG she can enter even if its locked! wOw hehe ^^)

Maybe its planed but then i have no possibility to check if its or not :}

spells are laggy one less others more , players cry for the lag during events, cant imagine how it would laggy with 300 players online
so ingame ability to disble the effect would litle solve it
we could have slider simiar to grafics detail distance and when its set to 0 all efects would disabled , small distance would allow to see own spells and not get lagged by others

would be great if somone review the effects if there is way to optimalize it and make less laggy

In order for the custom channels to be useful, they need a convenient interface. The need for typing /x before stuff isn’t terribly annoying, but also not terribly convenient. However, the biggest issue is that with multiple such channels, all talk gets mangled into one. The designation for the originating channel doesn’t help much in that case.

Therefore it would be nice to be able to create and assign custom tabs to channels, which would then function just like any of the built-in tabs. It would be even nicer if that arrangement could be stored, which would go very well with the auto-joining of custom channels proposed elsewhere.

I would like to be able to maintain my buddy list a bit better by adding extra info.

I use the list as many to also locate enemies. But the list gets longer and longer so I would like to add additional info to it. Like the guild when met etc.

1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…

2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.

Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:

Now: “When they’re all to the right, I move them all back and move bead in a second line…“
Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“

I’ve completed the child quest that looks for the Boss around Gugrontid, but Sapling of Xiosia hasn’t completed as well.

just a idea for a simple rp command. entering /playdead will play the death animation and leave your character imobile similar to the sit command but you will be lying down instead. this can be usefull in roleplay where you are injured but not actually dead or if you want to role play your character going to sleep. entering /stand will cancel both /sit and /playdead. in later versions of the game perhaps this can be also be used to fool the less intelligant monsters like ulbernauts rats and some of the bugs into giving up the chase and loosing interest. i think it would be benificial to have a way to roleplay being wounded or dead without having to actually go to the death realm. say for example your character was killed in a roleplay setting you could use playdead to have a open casket funeral complete with a body that will not dissapear after a minute or two.

i am not sure how easy this would be to acomplish but i suspect you could duplicate the existing sit command and just change the animation called

If you remove one or more items with a given quality X from a container,
with the command /takestackall or the respective button
while holding another item of quality X in your hand,
the stacking occurs in your hand-slot, even while you are working on the item in that slot.
Thus work done is being interrupted.

This command has been on the wishlist (and also on the ToDo list for releases) since a very long time. I post it here in the hope it will be more visible to interested people to implement.
The idea of the command is to control an NPC completely, not just talk as them through /impersonate. However, since controlling the actual body of an NPC is extremely complicated, it would be much more convenient (also from GM side) to simply make it seem so to the player.

Thus a possible way to implement the /possess command:
The syntax would be

/possess [NPC_name|target]|reset

Issueing the command would have the following effects:

1. The GM is moved to the location of the NPC.
2. The NPC is renamed to “$originalNPCsurname_P” (family name is unaffected).
3. The GM is renamed to $originalNPCname and the original GM name is stored in an extra db field.
4. The label color of the GM is set to NPC (/setlabelcolor).
5. The NPC is /slid u 1000.
6. All scripts (most importantly movement) of the possessed NPC are temporarily frozen.
7. GM temporarily gets all traits of the NPC (original traits of GM are stored on db).
8. GM is /set invisible off.

Issueing /possess reset would have the reversed effects:

1. Possessed NPC is moved to the location of the GM.
2. The name of the GM is restored.
3. The NPC is renamed back to §originalNPCsurname.
4. Labelcolor of GM is reset.
5. Scripts of the NPC enabled again.
(GM is not moved).

It’s important that the status of NPC (possessed), name and traits of the possessing GM are stored on DB so that a possible server crash has as little impact as possible.

If one is possessing an NPC already and then tries to possess another NPC, it should automatically issue /possess reset before executing /possess otherNPC.
When possessing, it should give a warning that the path of the NPC might be disturbed if /possess reset is issued too far away from the original position.

As a final cut, resuming scripts of the NPC should be delayed for 2 more minutes, giving the GM time to switch back into possession without paths getting in the way. That way it is possible to possess two or more NPCs back and forth.

1. Ability to teleport to the player from the petition window
2. Player side: /petition should open the petition window with a short introducing text (in another text window?) how to use the petitions (not to post wishlist items there, how to use (possible) categories..)
3. There should be a drop-down menu for selecting a category [Not Specified; Movement; Bugreport; Name; Event; Harassment; Quest; Miscellaneous] to classify the report. This could be used for statistical purposes post-process as well.
4. A button to mark the petition as URGENT which will add a parseable <star><star> URGENT<star><star> (<star> = *)to the header of the petition so our post-processing tools (aka gmbot) can forward/poke outside the game. (This is important!)
5. Before the petition is finished there should be a preview to check everything again, to make last changes.
6. As long as the petition is unassigned the button shows “claim”, once claimed the button shows “release” to unassign the petition again.

Request from  FS#3092 :

“In the GM petition window, there should be a button ‘Guidelines for petitioning’ and when you click it, it gives just that. Guidelines for petitioning.

I recently filed a petition and didn’t know what to include, what was superfluous, whether it was too long winded or not, etc.”

Request from  FS#3101 :

“We need enhanced petition system to allow adding several notes and note titles, as well as ability to review closed petitions.
The ability to add several notes to a petition would also help us handle an issue, then log off, but leave notes for other GM’s to review what we have done and pick up / complete.”

the command "/pet Petname, dismiss" stopped working in the last few days.

"/pet $number, dismiss" does not work either.

The following does work:

/target Petname
/pet dismiss

As subject says: /me in group chat goes to main tab. In Crystalspace based PS it went to group tab.

Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?

If you have 20 eggs in your inventory, split up in a stack of 19 and 1 separate, /giveitem Test all egg will only give the target 1 egg. You have to stack all eggs together for the command to work.

This also means that if a character has 3 swords stolen via an exploit, and a GM would use /takeitem Cheater all sword, only the stacks would be taken. So if the cheater had 2 swords in a stack and 1 separate, he would keep the separate sword.

Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening.
My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.

Making “Set of Steel Plates”. The button “Check Prerequisites” does not make “Prepare” button visible although I have a “Heated Set of Steel Pieces” in inventory. When equipping a “Heated Set of Steel Pieces” into left hand I can shape it into “Set of Steel Plates”.

The quest “Beer Tasting Event” (that I understand is the one to start into the Brewing skill) is not working as intended.

OBSERVED:
~~~~~~~~~

When I initiate the quest dialog in the interaction menu with a double click on the option
“You brew ales and beers I see, and smell.”

the quest master replies with the generic
“Looks like you are in search of fame and honour. Unfortunately I have not tasks to help you in that.”

The quest is not taken up accordingly.

EXPECTED:
~~~~~~~~~

The quest dialogue should be properly initiated and a quest log entry should appear after that.

During the last Dev Meeting, there was a good discussion about looting problems, especially after killing multiple opponents.
Aliasing with “/target next” does not solve the problem, because several players confirmed that this command tends to skip corpses.

Therefore Eredin asked for this ticket as a reminder to check the command.