PlaneShift

The forge at Gardr’s smithy does not offer the usual interaction button when opening the container window. There are simply no buttons.

after speaking with Sysial you are teleported to the dryken plane instead of the proper location

in the quest Lori’s Little Delivery you are sent to the plaza to get a number on the fountain, there is nothing on the fountain to inspect to get the number for Lori

The item description of a “Shiny Major Gold Diamond Necklace” states that the item has a (base-?) buff of +3 CHR.

It hasn’t when equipped.

Either the description of the buff effects need a fix.

when I run around the world, my max stamina decreases as the same rate as my actual stamina. It really isn’t a crazy issue as everything works normally but when looking at my stamina as it decreases, it seems to be full the entire time until it finally just disappears and I’m suddenly unable to move.

When crafting, the stamina bar works as intended with the max stamina never changing and only my actual stamina decreasing.

The version affected is 0.7.40, unavailable as an option in the FlySpray configuration.

If you have the right amount of raw materials for a crafting process, but they are not in the same stack (for example because you almost used up one stack with other crafting before and you have another full one) the right amount of items gets transferred into the container, but in two separate stacks, the crafting process accordingly fails with the message that there isn’t the right amount of items and ultimately if you don’t notice the message you are wasting the correctly attributed raw material.

For a while I have been trying and failed ot make Octarch’s delight and Lionfish Souflee.

In both cases the mixing in a wooden bowl didn’t work.

The new crafting interface now shows that there is baking skill required in both cases which doesn’t make sense given the tool set or the recipe book involved
.

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

Many recipes try to achieve one end product from one main ingredient and if crafting transformations yield several intermediary products they often are used collectively in the same amount to process further. That observation leads me to believe there was is a mistake in the recipe for Octarch’s Delight.

A fish is cleaned and cut into 2 Filleted fish

I would assume the final product therefore to make use of 2 Filleted Fish together with 1 each of the rest of the ingredients to combine into one Unmixed Octarch’s Delight.

instead

I find only 1 Filleted Fish goes into the mix but 2 sauce items do. This does not make a lot of sense and so I am suspecting a mix up in the item quantities with this crafting step (Combine … into Unmixed Octarchs Delight).

Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening.
My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.

Sometimes targeting certain npcs after they’ve died can be trick/frustrating (particularly rogues/cutthroats etc after die animation). It would be nice if you’re in range of a dead npc and you press the “E” key, that it would either open the loot window automatically (instead of opening the dialogue window or doing nothing, depending on npc type) or open the context menu with the loot option (which already exists, it’s just on right click only which is slightly annoying because I frequently lose target on the dead npc when right clicking or navigating to the NPC’s body if I’m farther away).

The quest Right on the Mine uses a quest item named Hamel Provision and at one point it’s supposed to be given to Gardr. Currently that does not happen. The quest will progress, but the quest item remains stuck in the inventory. It can be placed into storage, but otherwise there’s no way to get rid of it.

Making “Set of Steel Plates”. The button “Check Prerequisites” does not make “Prepare” button visible although I have a “Heated Set of Steel Pieces” in inventory. When equipping a “Heated Set of Steel Pieces” into left hand I can shape it into “Set of Steel Plates”.

I just completed ‘making a metal stock’ quest from Harnquist with my new Alt Char But did not received the crafting book ‘Working with Stock’, instead the next quest titled ‘Learning blade making’ has popped up. I think it sure is a bug.

Possible addition of the ability to teleport all PC’s enrolled in an event at once to avoid accidentally grabbing a passer by with the area option.

This is most limiting when trying to juggle multiple containers (such as the furnace and the stock casting) at once.

In the quest Lorytia Starhammer and the Clan reunion Lorytia mostly uses "ye" instead of "you". But the use is not consistent throughout the quest. You'd think that if she regularly says "ye" she'd not switch to "you" for a sentence or two in between, sometimes even switching back and forth within one sentence.

f.e.:
"That is very kind; I thank you. Here is the note: just tell him I sent you."

"Oh, I am sorry, you are still here… do you want to hear what happened?"

"I know ye worked very hard on your piece for the competition and you should have won. I take full responsibility for shortchanging you on the scores."

"He may have some means to get them prepared for you, but ye might make your journey faster if you have them on hand."

There might be more later in the quest, but I'm not done yet.

The paragraphs ‘§’ on the walls of the guild house map “guildlaw” are mirrored. For years already (just always forgot to report it).

Upon completion of the without a way quests ( In my case Crystal Way ) govell sends me to Levrus log:

[NPC] Govell Mihdren says: This will prove the mastery you gained in the Crystal Way.
(06:14:52) [NPC] Govell Mihdren says: Make a good use of it, Resildren.
(06:14:55) [NPC] Govell Mihdren says: And take this.
(06:14:58) [NPC] Govell Mihdren hands you an amulet.
(06:15:00) [NPC] Govell Mihdren says: Bring it to Levrus, one final lesson awaits you there.

but Levrus will not accept it, to make sure I completed my leveling (200) and returned, and he will still not accept it?

I’ve talked to other masters of the other ways and this seems to be a global problem, is this just not implemented yet, or is it a bug?

these two npcs need to be separated a bit outside their house at 1 AM

Fri Dec 19 09:55:20 2014, <src/common/paws/pawsimagedrawable.cpp:69 PreparePixmap SEVERE>
Fri Dec 19 09:55:20 2014, Could not open image: >Scaling Field Background<
Fri Dec 19 09:55:20 2014, Fri Dec 19 09:55:20 2014, ART ERROR: PawsTextureManager wasn’t able to load the requested image: Scaling Field Background

This bug occurs on a fresh install of the Linux 64 bit 0.6.1 client, after update to 0.6.2.

The machine is a Lenovo T430 running Parabola GNU/Linux-libre.

lspci:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

sudo lspci -s 00:02.0 -vvv:

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])

Subsystem: Lenovo Device 21f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Address: fee00018  Data: 0000
Capabilities: [d0] Power Management version 2
	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915

uname -srvmpio:

Linux 3.17.6-gnu-1 #1 SMP PREEMPT Tue Dec 9 04:18:43 UYST 2014 x86_64 unknown unknown GNU/Linux

If you try to equip an item from a container into an invalid slot, the item becomes invisible till you reopen the container.

Approaching Stalg does nothing to the quest, can’t complete.

While running parts of the hair seem to bob up and down without being attached to the rest of the hair, more noticeable while sprinting

Add a better way to search for icons. clicking through each individual icon in a long list is fairly annoying for some of the larger categories, and there are several icons that are blank so it’s not always clear there are more icons after that. Being able to see more than one icon at a time/being able to filter by name or type (ways for magic, weapon types for weapons, tools, music, decorations etc.) or having more categories with shorter lists would also be helpful.

Two problems with guards:
They do not complain about characters with wielded weapons.
They do not let creatures enter the city!

items inside the mail window have no weight/quality/size.

Steps to reproduce:
1. go to a fast travel npc and click on mail
2. click on write mail tab
3. place item(s)/coin(s) in the mail window
4. hover over items

persists in received and sent tabs as well. You can send mail to yourself to test.

In the skills window, the scroll bar doesn’t works with scroll button on mouse in all tabs. Works as expected in the Stats and Combat tabs. Does not work in the Magic, Jobs, Various, or Factions tab. The scroll bar needs to be manually grabbed and dragged to see the rest of the window.

The scroll bar also doesn’t scroll down far enough in the factions tab and in order to see the very bottom of the tab; the window has to be resized to see the bottom.

When looting a monster, there is a system message in main chat saying “<mob> has no money to be looted” when you click “loot all” even if the monster does have money to be looted instead of the correct system message which should tell you how much money you looted (the amount of money looted could also be added to the loot window as a quality of life improvement).

If the monster doesn’t have any money, then there are two system messages in main chat saying “<mob> has no money to be looted”. One appears when you open the loot window, and once when you click “loot all”.

Dragging a glyph from an inventory container (e.g. sack or glyph sack) into any slot in Spell Research window causes the glyph to disappear from the container until window is re-opened.

Steps:

- Open Spell Research window from “spellbook”.

- Open glyph sack and drag glyph into any slot in Spell Research window. (Try to use Research or Way slots. Purify Glyph slot only reproducible if right hand has item equipped.)

- Glyph seems to have disappeared from container, but will reappear if window is refreshed.

Additional info:
Dragging glyph from glyph sack on the ground to Spell Research slots puts it into inventory.
Moving a glyph from inventory into Purify Glyph slot equips the glyph in right hand but does not begin purification.
(Not sure if these features are conflicting with spell research.)

Font size in settings for “Speak with NPC Text” or “NPC Response Text” cannot be changed.

floating building located here: -335500.28 -590858.44 18368.43

you can walk on water at this river: cup_of_laanx 717636.88 -659357.94 10930.61

Can’t tell what time it is in Yliakum

When swimming underwater and looking through the water to things above water, everything has a water blur effect except for the leaves on the tree located here: ojaroad1 322214.06 -357065.16 15257.09

/pos hydlaa_plaza 179911.09 -295941.69 10545.03

There is tiny unreadable text in the Main tab of the chat, if you have font size 0 for Chat Text. Any chat that comes after it is fine, and it becomes readable if you change Chat Text Size, even if you change it back to 0 again.

It is the “<Player> just joined PlaneShift” text

In the old version, there was a small inventory without the character part. It could be useful for trading etc.

These 2 values for experience should be merged for a less verbose log.

Similar but not identical to FS#7871

Four trees growing in the center of the riverbed at /pos
raurim_area 632871.68 -471483.83 9353.26

Although not impossible to have them grow in the water, it’s highly unlikely they’d grow at the center of the stream.

When using an enchanter my character is digging or lunging.

This should be the same animation as spell casting IMO.

Also says in Main chat “Guild Member just joined Planeshift” yet has a No under Online.

You may pick Energy Glyph or Energy Glyph. And it should be Levrus’ Rat Eyes

There’s a minor map glitch in Jayose library.
On the ground floor there’s a patch of grass blades floating between the shelves in mid air.

Death animations play inconsistently for several NPCs. ex. Rogues in Oja and Cutthroats on Ojaroad, forest aragama on the road between the magic shop and Hydlaa.

Sometimes the animations will play, but most of the time they do not.

The fishing animation for the female stonehammer reels in the rod with the right hand, but the reel on the rod is for reeling with the left hand. This may affect other character models as well.

Certainly happens with Sapphires, making q300 Enchanted Sapphires gives no practice in a way.

There are gaps along the road or at the base of buildings at these locations in Amdeneir:

Amdeneir -348976 -595451 18804

Amdeneir -347532 -596049 18814

Amdeneir -346446 -593819 18821

Amdeneir -346293 -592665 18807

If you are in a location that has both fishing and harvesting available, if you successfully harvest an item and do not move, but switch to fishing you get a warning saying “You cannot fish in the same place twice” even though you have not fished at this location.

If you successfully catch a fish and do not move, but switch to harvesting you get a warning saying “You cannot harvest in the same place twice” even though you have not harvested at this location.

This is probably true of mining if there are area overlaps, but I have no idea if this actually exists anywhere.

example location for fishing/harvesting: /pos 109482 -757679 20767