PlaneShift

Task TypeIDPrivateCategorySeverityStatus  descOpened byAssigned ToSummaryLast Edited[[changedby]]
Feature Request2436NoUser InterfaceLowProspect TaskMrokiiAn obvious way to show a player's away/sleeping status28.06.202264 Task Description

I have often experienced that people come close to my character, trying to interact with me without trying to use tell. So they do not get that I am actually away, they may just assume that I am or (in the worst case) think I am rude because I am ignoring them. So what is needed is a way to show another character the own away and-/or sleep-status. Though I am not quite sure which would be the best way to do so.

Here are some possibilities:
- add “away” or “sleeping” to the players label when one moves the mouse over another character
- This status should be shown always, no matter if the user has activated the display of name or name/guild in options. Or at least there should be an own setting for it, in case somebody absolutely do not want to know about this status.
- To make it a bit more icly, don’t separate between “sleeping” (activated via “/sleep”) and “away”. In both cases use “sleeping” as a players status.
- A possible extension could be to set auto-sleeping like on irc. Say, the user hasn’t done anything for half an hour, he is automatically set to “sleep”-status.

I think this would help to avoid confusion like what I described above.

Related to FS#2667

Feature Request705NoLowNewCaarriemore options with /morph03.03.20096 Task Description

feature request to have more options to morph to. GMs are not able to change face when they morph or any other option in character creation.

skin
hair
face
etc

Feature Request1022NoLowNewdurwynAbility to lock the guildhouse from the inside.04.04.201143 Task Description

When i first enter in the guild house, i inspected the arounds to remember what i had already seen in the pasts months , the pics and so :}

But i was disappointed by the fact that i cant close the door :( i mean by the inside..
i take the example that one of my guildmate invited her husband in it but then she had to go out to lock the door and enter it again. (OMG she can enter even if its locked! wOw hehe ^^)

Maybe its planed but then i have no possibility to check if its or not :}

Feature Request1642NoMediumNewA. Kiefner/possess an NPC15.11.2008123 Task Description

This command has been on the wishlist (and also on the ToDo list for releases) since a very long time. I post it here in the hope it will be more visible to interested people to implement.
The idea of the command is to control an NPC completely, not just talk as them through /impersonate. However, since controlling the actual body of an NPC is extremely complicated, it would be much more convenient (also from GM side) to simply make it seem so to the player.

Thus a possible way to implement the /possess command:
The syntax would be

/possess [NPC_name|target]|reset

Issueing the command would have the following effects:

1. The GM is moved to the location of the NPC.
2. The NPC is renamed to “$originalNPCsurname_P” (family name is unaffected).
3. The GM is renamed to $originalNPCname and the original GM name is stored in an extra db field.
4. The label color of the GM is set to NPC (/setlabelcolor).
5. The NPC is /slid u 1000.
6. All scripts (most importantly movement) of the possessed NPC are temporarily frozen.
7. GM temporarily gets all traits of the NPC (original traits of GM are stored on db).
8. GM is /set invisible off.

Issueing /possess reset would have the reversed effects:

1. Possessed NPC is moved to the location of the GM.
2. The name of the GM is restored.
3. The NPC is renamed back to §originalNPCsurname.
4. Labelcolor of GM is reset.
5. Scripts of the NPC enabled again.
(GM is not moved).

It’s important that the status of NPC (possessed), name and traits of the possessing GM are stored on DB so that a possible server crash has as little impact as possible.

If one is possessing an NPC already and then tries to possess another NPC, it should automatically issue /possess reset before executing /possess otherNPC.
When possessing, it should give a warning that the path of the NPC might be disturbed if /possess reset is issued too far away from the original position.

As a final cut, resuming scripts of the NPC should be delayed for 2 more minutes, giving the GM time to switch back into possession without paths getting in the way. That way it is possible to possess two or more NPCs back and forth.

Feature Request1761NoLowNewEricItems purchased by NPCs should be availabe for sale to ...27.09.201443 Task Description

The way it works now:

I mine ore or get weapons drops from killing monsters and sell them to a NPC. These items then simply disappear into the ether.

The way it should work:

The items purchased by a NPC should be available for players to purchase, at a mark-up to what the NPC bought the item for.

Example, If I sell 20 Iron Ore to Trasok, then he should have 20 Iron Ore for sale.

Steps to reproduce:

1. Acquire an item that a NPC will purchase.
2. Open the buy/sell dialog with this merchant.
3. Notice that when in “buy” view there are no items in the appropriate category.
4. Sell the item in question.
5. Go back to the “buy” view and observe that there is still no itme for sale in that category.

Justifications:

1. The players/devs have expressed a desire in the forums to have a stable economy. This will help.
2. For RP, the prices should fluctuate depending on a very simplified supply/demand algorithm.
3. For RP, how can a merchant justify shelling out mountains of trias for items that never seem to get used.

 a. Trasok shouldn't fit in his house with all the silver/gold ingots he has bought over the years.

4. This will help crafters be able to get raw materials at reasonable IC-justifiable prices and hopefully get prices for crafted items to be reasonable and IC-justifiable as well.

Feature Request1804NoLowNewQia FaskUse of containers holding liquids is unrealistic (mugs,...06.07.201322 Task Description

Mugs are a staple of RP for many people, but their use is currently quite unrealistic – you “drink” away a solid glass object.

What I proprose to fix this may not be purely realistic, but at least makes sense.

When an object is consumed, it should leave behind an “empty” (mug, potion bottle, jar, etc.) which will appear in the inventory. The cost of items which come in containers should be increased, as “deposit” or sorts, like when people buy pop or beer in real life. People would be able to sell the empty back to reclaim their deposit.

In the case of mugs of alcohol, they could be strewn about on the table as the drinking goes on, so people know who’s been drinking too much. There wouldn’t be any worry about “littering”, as there would always be someone willing to pick up after and return them to Allelia or Brado for the deposit money.

If this is implemented, it would also allow for future features like being able to return to Allelia or Brado for a “refill” without needing to pay the deposit. Same for potions and other items that are sold in containers.

Also the possibility of putting other liquids into the containers. It would be neat for example to be able to stop by the secret garden and fill up a bottle, mug or bucket with fresh water from the pool (it could be done by the usual right-click method on an object).

I feel these sorts of things would help improve the RP and realism a great deal.

Feature Request2189NoLowNewweltall[pawsillumination] zoom support when looking at sketche...01.09.200821 Task Description

It would be nice if it was possible to zoom sketches when looking at them. This would also be useful when you get a sketch/map which is too big for your screen and allows you to have the entire image on screen by reducing zoom.

The included patch allows the user to zoom from 1/10 to 10x the map increasing the size of every element on screen.
The buttons used for this are > and < if someone has a better suggestion about them or thinks that having the increase/decrease zoom on screen would be useful i could add them.

http://pastebin.ca/1189613

Feature Request2319NoLowNewAuto-Create Key For Lockable Container01.10.20082 Task Description

When using /item to create a lockable container, also create a key automatically and place it in the container.

At the every least, just create the (master?) key and put it in the new container.

More complex would be to alter the dialog to allow input of how many keys (in addition to master?) to auto-create.

Feature Request2647NoLowNewMario RohkrämerPvP areas need an unmistakable warning08.10.201165 Task Description

Until today I did not know that “Camp Banished” is a PvP area at all. Until I got killed.

I was asked by a GM “if I did not expect that”?! - No, I did not! I see everything as a roleplaying incentive, unless I get a system message warning me about changed world attributes.

This issue is “critical”, because inside this PvP area are quest relevant NPCs. Now, what would happen if you are in a quest dialog with an NPC, and get killed? - You would lose that quest. And if it was a one-time quest, you’ll lose it forever, for your char.

This almost happened to Cadwen today, whom I helped to deliver a “Keg of beer for Filch”. Fortunately the keg was not stolen while we returned from the Death Realm.

Feature Request2022NoBugtrackerLowNewAdriánBounties - Game feature plus GM Tool.01.01.202251 Task Description

This idea came up in IRC.

When someone breaks a law, players can report it to GMs or another NPC guard. Then GMs or the guard activate an option that turns on the autoaccept duels for an hour, with a different color label. During that hour, players that find the outlaw can kill it (or people with X faction in guards), so that would involve some players acting like guards in town (and some outlaws would have to leave the city for some time to avoid being killed).

Bug Report7446NoBugtrackerVery LowNewGongerGuards! Guards!13.01.20232 Task Description

Two problems with guards:
They do not complain about characters with wielded weapons.
They do not let creatures enter the city! ;-)

Bug Report7479NoBugtrackerLowNewDamolaMoving an item inside around inside container gives "it...30.12.20226 Task Description

I have a container (a sack) with tools. In there, I have a rock pick. Its capacity is 18.85/20. I can move the rock pick from container to inventory and back nicely.

However when I move the rock pick to a different slot in the container, I get:

“Item cannot be added to that container because item is too large to fit.”

I bet what happens is that PSUnreal first tries to add the rock pick to the new slot in the container and only then removes it from the old slot. This is of cause the safe way to do it, however it does lead to above error, as the rock pick has a size of 1.5 and that does not fit in 20-18.85 anymore.

That seems to be the case, cause moving a potion around in a container with capacity 7.90/20 works nicely.

I believe Crystal Space PS had the same “bug”.

Bug Report7512NoBugtrackerLowNewHaviland Tenourican not attack without a weapon14.01.20232 Task Description

When trying to attack it says “You have no weapons equipped!”

Bug Report7656NoBugtrackerLowNewferretfloating book on ojaroad114.01.2023 Task Description

a floating book, that claims to be a dead bird, is floating and inaccessible as it has no collision and thus not allowed to be picked up. position of the book is found by going to /teleport me map hydlaa_plaza 337145.72 -345854.81 10980.61 on teleport you are directly where the book is situated and on a rivnak, a nolthrir has it head high.

Bug Report7684NoBugtrackerMediumNewHaviland TenouriEditing Guildpermissions and Points24.01.20231 Task Description

Giving a Guild level the permission to edit gild points is not honoured. The flag is shown, but if someone of ther permitted group tries to edit the points of himself or another member he gets “you don’t have the permission…”

Additionally, editing permissions is not propageted to other online members. Ie. they do not see any changes in guild privileges.

Bug Report7754NoBugtrackerLowNewHaviland TenouriAlliance chat goes to main18.10.202311 Task Description

Chat for the alliance chat tab goes to the main tab.

Bug Report7755NoBugtrackerLowNewHaviland TenouriHelp chat is broken17.02.202311 Task Description

Messages to the help channel get lost, as if they were never written

Feature Request3956NoCharacter CreationMediumNewAndreas RenbergAllowing apostrophies or dashes in names03.10.202243 Task Description

Not sure if this is possible, but seeing as how the names are treated more as actual names and less as usernames, I believe there should be some support for apostrophes or dashes in names.

For instance (some common fictional apostrophized names)
Teal’c
T’Pol
Kal-El
Jor-El

Perhaps if the apostrophized version of names are only for “display purposes”, so if you see someone named T’Lara, their name is stored as a “key” in the database as tlara, and people can access their name (for instance with /tell) using Tlara, but for display purposes, their name shows up as T’Lara.

Not important, just a thought…

Feature Request4465NoCharacter CreationMediumNewMinksShow naming policy in char creation.20.08.201053 Task Description

An newbie in the tutorial brought up this idea, and I like it a lot:
It would be nice if the char creation provided a clickable link or a pop-up window to the naming policy.

Bug Report5213NoCharacter CreationMediumNewRalph Campbelldon't hardcode race to set gender in pawscharcreatemain...16.05.20112 Task Description

Index: src/client/gui/pawscharcreatemain.cpp

— src/client/gui/pawscharcreatemain.cpp (revision 7252)
+++ src/client/gui/pawscharcreatemain.cpp (working copy)
@@ -1012,10 +1012,9 @@

   view->Show();
   view->EnableMouseControl(true);


- //temporary hardcoding needs removal
- maleButton→SetEnabled(id != 9);
- femaleButton→SetEnabled(id != 9);
- if(id==9)
+ maleButton→SetEnabled(currentGender != PSCHARACTER_GENDER_NONE);
+ femaleButton→SetEnabled(currentGender != PSCHARACTER_GENDER_NONE);
+ if (currentGender == PSCHARACTER_GENDER_NONE)

   {
       maleButton->SetState(false);
       femaleButton->SetState(false);
Bug Report5439NoCharacter CreationMediumNewMario RohkrämerRace selection: Collection of issues found in systemati...15.10.20213 Task Description

There are several issues I experienced during testing the Character Creation / Race Selection:

  • Hair style is hard to check if manual rotation is necessary during zoomed view.
  • Male Ylian: blonde/brown are confusing names for face textures, they should possibly be changed to emotions. Blonde 1 and Blonde 2 appear identical.
  • Male Dermorian: Face style “Forehead tatoo …” is too long to be readable completely
  • Female Dermorian: “Medium” style is shorter than “Short” style
  • Stonehammer: Race description still mentions “Stonebreaker”. Many descriptions may need an update after the race renovation.
  • Male Stonebreaker (and others): Hair and Beard styles may need a more descriptive name.
  • Female Stonehammer: Traits seem to be misordered. If “Braids” are the two long upper tails, and “Rivnak tail” should probably be the one long tail, then “Lavvar tail” should instead be the two small low tails? What is a Lavvar, anyway?
  • Kran: I’d prefer visually disabling both male and female gender buttons. Leaving the female activated might be confusing.
  • Female Ynnwn: Face style “White eyes” doesn’t use white eyes. The name should possibly be changed, e.g. “Aged” (in contrast to “Young”).
Bug Report6499NoCharacter CreationMediumNewMario RohkrämerJoe LyonPseudo one-named characters08.06.2014 Task Description

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

Bug Report5398NoCharactersLowNewMario RohkrämerKlyros model: Right hand looks strange15.04.20121 Task Description

The right hand of the Klyros looks like their claws poke through their fist.

Bug Report4603NoCharacters AnimationLowNewSenOdd enkif sneak animation09.02.20136 Task Description

The sneak animation of Fenkis is broken since.. I think years now. After trying out the new cool transparent-feature while sneaking looked it to me like the Menki one is broken, too? (fixed)
Anyway, already the broken Fenki animation looks a bit annoying :P (It looks like side-stepping while walking)

Sen

Feature Request5693NoClient start-upLowNewRalph CampbellAdd 2560x1440 to launcher11.11.20123 Task Description

I would like to see 2560×1440 added to the list of monitor resolutions in the launcher.
For example:

Index: src/pslaunch/pawslauncherwindow.cpp

— src/pslaunch/pawslauncherwindow.cpp (revision 8373)
+++ src/pslaunch/pawslauncherwindow.cpp (working copy)
@@ -342,6 +342,7 @@

   }
   else if(ratio == "16:9")
   {

+ resolution→NewOption(”2560×1440“);

       resolution->NewOption("1920x1080");
       resolution->NewOption("1366x768");
       resolution->NewOption("1280x720");
Feature Request1506NoCombatLowNewThomNon-lethal guild wars.24.01.201010 Task Description

From forum thread http://hydlaa.com/smf/index.php?topic=32393.0

In normal duels you can decide whether to kill your opponent or not, leaving him with 1 HP. However, in a guild war this is not the case, in a guild war you can only fight to the death. Make it so that fighters in a guild war have the possibility to spare an opponent. This could be done by creating an option when starting a guild war: lethal war or non-lethal where the fighters can decide to spare an opponent or not.

Feature Request2956NoCombatMediumNewOrgonwukhDavide VescoviniCombat system calibration19.04.20104 Task Description

Combat system calibration

Short version:

I propose that in general the amount of damage dealt by any weapon or magic spell should decrease with the distance from the attacker to the target. Also, fast weapons should generally deal less damage than slow weapons. The combat system including both weapons and magic has to be more balanced.

Elaborated version:

Damage (D):

This is the amount of health points subtracted when an single attack is successful. Examples for magic are:

  • Energy Arrow (about 75 HP)
  • Summon Missile (about 48 HP)
  • Flying Stones (about 63 HP)

For weapons one has to include the levels and stats of attacker and target. As a reference I determine both attacker and target to have maxed stats and levels, full heavy armour equipped and to use two weapons at a time in bloody stance. The weapon damage is the average damage including the failed attacks. One could either ask a dev to look this up in the database or do a numberof attacks and measure the arithmetic mean. For convenience I determine the damage of short swords to be 500 HP.
This value is not the value specified in the weapons properties, but the “real” damage dealt.

Maximum attack distance (MAD):

This is the maximum distance from which an attack can be made. MAD can be measured in game units (the values you get if you type /pos). One unit should be about 0.5 metres. Examples for magic and weapons are:

  • Energy Arrow (about 57 units)
  • Summon Missile (about 37 units)
  • Flying Stones (about 74 units)
  • All weapons (about 2 units)

Attack speed (AS):

This is the time in seconds (s) between the starting of the attack and the moment when the damage is dealt. Examples:

  • Summon Missile (about 0.48 seconds)
  • Flying Stones (about 0.28 seconds)
  • Daggers (1.5 seconds)
  • Short Swords (2 seconds)
  • Sabres (2 seconds)

Damage per second (DPS):

This is simply D divided by AS.

Effective Damage (ED):

I propose to let the DPS decrease linearly with the MAD. I introduce a factor (F) with which you can put more or less emphasis on the distance weighting. Based on the above assumed value of damage for short swords, I propose that the ED with a value of 500 should be used to weight all weapons and magic attack spells:

ED=F*(D/AS)*MAD=500
or
ED=F*DPS*MAD=500

For F=1 this simply is

ED=(D/AS)*MAD=500
or
ED=DPS*MAD=500.

Let us fix F=1 here for now for convenience. If my proposal for weighting is too daring or too conservative, we still can talk about setting a different value for F.

What does this mean?

Let us look at the weapons first and assume that the values for short sword are as I wrote above: AS=2, MAD=2 and D=500. Then DPS=250. This short sword deals an average damage of 250 HP per second. Since MAD=2, ED=500 HP. I have nothing to object concerning these values. This is my reference for the calibration of other weapons or magic spells from now on (see below).

Let us look at the spells:
With a short sword you deal an average damage of 250 HP per seconds from a max. distance of 2 units.
With Summon Missile you deal a damage of 100 HP per second from a max. distance of 57 units.
With Flying Rocks you deal a damage of 225 HP per second from a max. distance of 74 units.
Is that fair? Does it make sense that more damage can be dealt from a safe distance? This “unfairness” is reflected in the ED values of the spells:

  • Summon Missile (current): D=48, AS=0.48, MAD=37. ED=(D/AS)*MAD=(48/0.48)*37=3700
  • Flying Stones (current): D=63, AS=0.28, MAD=74. ED=(D/AS)*MAD=(63/0.28)*74=16650

We notice that the value of ED is way higher for spells than for the short sword. Flying Stones also have a very high MAD and hence a high ED value.
If we assume that my proposal is appropriate for evaluation of the power of weapons and magic, this means that Summon missile is 7.4 times more powerful than using short swords and Flying Stones is 33.3 times more powerful than short swords. I think that is quite a realistic reflection of the current state

Calibration

I propose to calibrate weapons and spells by setting the values of D, AS and MAD in a way that the ED is about the same for all of them. In case we use the short sword for a reference, we could adjust the values for Summon Missile and Flying Stones by reducing the MAD, for example To do this we solve the equation for ED in regards to MAD:

MAD=500*AS/D

Then the values for the calibrated spells would be:

  • Summon Missile (calibrated): D=48, AS=0.48, MAD=500*AS/D=500*0.48/48=5
  • Flying Stones (calibrated): D=63, AS=0.28, MAD=500*AS/D=500*0.28/63=2.22

If you think this attack range is too low, there is the possibility to calibrate the spells by setting the damage after solving the equation for ED in regards to D:

D=AS*500/MAD

Then the values would be:

  • Summon Missile (calibrated): AS=0.48, MAD=37, D=AS*500/MAD=0.48*500/37=6.48
  • Flying Stones (calibrated): AS=0.28, MAD=74, D=AS*500/MAD=0.28*500/74=1.89

It is also possible to calibrate the AS with AS=D*MAD/500. You can also try out different trade offs between D, AS and MAD as long as ED=500. As long as the ED is the same for all weapons and spells, the relation between damage dealt per second and the attack range is maintained.

Calibration will also be helpful once the attack range for weapons is implemented. Let us examine the calibration of the broad sword and let us assume that this sword has a damage value of D=750:

  • Short Sword (current): AS=2, D=500, MAD=2
  • Broad Sword (calibrated): AS=3, D=750, MAD=500*AS/D=500*3/750=2

So the attack range is the same while the attack speed and damage differ. One might think that it is more important to increase the attack range instead of the damage because of the bigger size of the broad sword. So let us assume that the damage value for the broad sword is D=600:

  • Short Sword (current): AS=2, D=500, MAD=2
  • Broad Sword (calibrated): AS=3, D=600, MAD=500*AS/D=500*3/600= 2.5

This seems to me an appropriate representation of the differences between the weapons: A broad sword has a longer range and deals more damage, but is slower than a short sword.

Final notes

This is a proposal for balancing the combat system. All values of weapons and magic are either estimations or assumptions. Feel free to provide the true values, if possible. Since the ezpcusa server exists, this might be a good opportunity to try such a system out. My assumptions about the levels, stats, armour and weapon properties of attacker and target are subjective and should be discussed.

Limitations:

Maxed levels were assumed, the properties of lower lever levels are unknown to me. But when known, those levels can be calibrated as well.
I did not include the amount of mana needed for the spells yet. A simple rule could be to have a linear relationship between damage dealt and mana used (maybe 1 to 10, so you can still kill a 800 HP opponent with 222 mana, which is the maximum at the moment as far as i know).
While the attack area of spells is a circle with a radius of AD (you just have to be closer than AD, facing direction is disregarded) while the target is in the centre of the circle, the area for weapons is much smaller because the attacker has to face the target. It should be something similar to a triangle. This disadvantage of weapons is not accounted for here. On the other hand, it is assumed that a spell caster casts spells as fast as possible. This disadvantage is not accounted for here, either. If those differences between weapons and spells is considered too big, you can think about setting F to another value than 1 for an appropriate weighting.
Once spells and weapons are calibrated, prices should as well be calibrated. You could either raise the weapon training costs or lower the magic training costs. Maybe doing both is a good idea.

Advantages:

Using this calibration, it is possible to design various weapons and spells which are different concerning D, AS and MAD, but they are weighted in a more appropriate way than it is the case now. Your choice of weapons is based on what you prefer: range, damage, speed or a weighting/combination of them. Combat can be balanced and become more interesting once players fight each other with different properties of their weapons and attack style.
The work for the devs is small. You need to change a single value for each weapon and spell.


Link to corresponding forum thread: http://www.hydlaaplaza.com/smf/index.php?topic=35352.0

Bug Report4937NoCombatMediumNewDanielMovement for Ranged not showing when firing long distan...04.04.20164 Task Description

When the monster is somewhat near you, the movement simulating firing an arrow with the bow is showing. However if the monster is quite far away the movement stops showing until either one of you gets closer to the other.

Bug Report5386NoCombatMediumNewKaerli StronwylleRange of combat messages is FAR too short08.07.20162 Task Description

You can easily shoot with a bow ingame to ranges far beyond the range of combat messages. Mob aggro (and sometimes the archery anim) do not work at such long ranges, either.

Bug Report7601NoCombatLowNewKiFunStuSJade Clacker03.02.20235 Task Description

Attack Jade clacker
it follows you around but does not attack

Tested in Laanx Dungeon

Bug Report7603NoCombatLowNewKiFunStuSThunder clacker03.02.20233 Task Description

Uses ranged sound attack

spams NPC chat tab with Attacks me using normal stance
and
emits A loud thundering noise

Does not actually attack me

Bug Report7604NoCombatLowNewKiFunStuSHP bar not diminishing when using Damage over time14.01.202311 Task Description

Cast poisonous hail storm.
health bar does not decrease even after creature has died

Bug Report7605NoCombatLowNewKiFunStuSOnyx Dagger03.02.20232 Task Description

attack onyx dagger

NPC chat tab spammed with Stares coldy at me
and
attacks me with defensive stance

it did manage to cast a spall that that says
Onyx Dagger drains your mental abilities

it has a residual magic effect on the ground that remained after it died
and still on the ground after it respawned

Feature Request726NoCraftingMediumNewDrunk HammerwielderRedesign/Add to the Crafting GUI.25.02.2013165 Task Description

Related to: http://hydlaa.com/flyspray_upgrade/index.php?do=details&task_id=611&histring=crafting

Goal of this feature request: To provide an alternative to the numerously unneeded clicking and dragging through the addition of additional options.

Possibilities:

1. Allow all targeting equipment to be targeted and add short cut commands as discussed in http://hydlaa.com/smf/index.php?topic=30727.0;topicseen and http://hydlaa.com/smf/index.php?topic=28284.0 .

1B. Add a /place command that would place a specified number of a specified item into a targeted container.

1C. Add a /remove command that would remove a specified number of a specified item from a targeted container.

1D. Add a /combine command that has the same functionality as the combine button that is on the right click menu.

2. Have the stock casting containers automatically convert large stacks of molten ore to the largest possible unit. (IE: A stack of 63 Molten Iron would yield a stack of 6 Iron Stocks and 3 Iron Ingots.)

2B. Add a button and command to Stock Casting that will toggle that will allow the user to cast only ingots.

2C. Allow the user to combine large amounts of objects at a time so long as the proper amounts of objects are present. (IE: 81 Iron ore and 9 Coal ore would yield 90 Molten Steel. Also, you could combine 10 sword handles with 10 sword blades to quickly put together 10 swords.)

3. Add a key to be pressed and held that would allow the user to pick up an entire stack.

I believe that there has been discussion of several other alterative on the forums.

Thank you for your time:
- Tontow

Bug Report5242NoCraftingMediumNewnobody specialblade can be removed from hand without disturbing work24.05.20112 Task Description

If you take a heated blade out of your hand while hammering it the work will not be interrupted until the work duration if finished. If you return it to your hand before the work is finished the transformation completes successfully.
THis appears to only work if you replace the item with itself, substituting a different identical item or a completely different item causes an interruption.

Feature Request5701NoCraftingMediumNewrodrigo moraesBad user experience: automatic stacking and merging hig...18.12.201231 Task Description

I’m a new user and I just had a very frustrating experience, so I want to propose an improvement.

I requested a guild mate to craft me some chain armor, and when I got it done I picked the Arm piece i was wearing and tried to exchange by the new one. By the gods, the quality-50 armor merged with the quality-300 one and I got two quality-175 armors. Without any confirmation.

I think the merge-on-stack system is fine for many crafting situations, but merging armor stats is a unexpected one. I fail to see why one would want to merge a higher armor with a much lower one. This doesn’t even make sense: if you mix water and herbs it’s ok that you get an infusion, but you can’t mix a chain mail with another one to instantly get two different ones.

I requested a GM to revert the stats and he said that this is the same situation as when one sells or gives away an item by mistake. I think it is not the same thing. This is not a mistake; it is common to exchange items in the inventory to organize or save space, and having these “side-effects” in place can make a simple inventory management a surprisingly bad experience for new users like me. :(

TL;DR:

1. Please review if it really makes sense to merge armors or weapons. I don’t see the use for it, and it sounds illogical, but probably I’m missing something.

2. Please consider adding a confirmation to actions with clearly bad side effects during inventory management, to avoid the frustration, specially for new users.

3. Please consider adding a toggle/checkbox to the inventory to turn on/off automatic item merging (disabled by default to avoid sad surprises like mine).

Thanks for all the hard work, guys. :)

Feature Request6029NoCraftingLowNewHirene PenifurNew skill: creating magical scrolls19.08.202226 Task Description

I think it would be nice if mages would be able to make magic scrolls, on the same patterns as you can enchant gems, you could enchant a paper by spells.

Then anyone could use that scroll to cast magic without magical knowledge, so a crafter or fighter character could use identifing, healing or other type of spells.
The power of the spell and the duration would depend on the quality of the scroll, and that on the way level of the mage who created it.

Scroll would be crafted from papers on the same way as you make enchanted crystals from gems.
It could use an ‘intermediate object’ or multiple glyph enchanting on a single paper would do it too.
For example, if a spell is a 3 glyph combination then the crafter would need to use those 3 glyphs (in the right order?) to apply the spell on the scroll.

Using the scrolls would work through the /use command.
/use Scroll of Healing Flash
/use Scroll of Analyze Dweomer
/use Scroll of Fist of the Volcano

The script should consider what is targeted, if an item is targeted, you could use identifing, if a mob or player has been targeted you could use the spell on the target too for attacking or buffing.
You also would be able to cast spells on other players that are only allowed now to cast on yourself like Dome of Perfection.

I already discussed it with weltall, who doesn’t see technical limitations in implementation yet.

Bug Report6171NoCraftingMediumNewVenalanJoe LyonBug with crafting items being marked as craftable when ...10.10.20132 Task Description

For an example.

In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.

The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.

Feature Request6333NoCraftingMediumNewElhorienDavide Vescovinimore variety of animal parts to craft Healing essences01.08.201414 Task Description

I write this to ask about more variety of animal parts in order to craft this essence, since it can be obtained in low production from aragnas and in high production from trepor queen. Trepor queen is just one mob in place and not always give to you the eggs sack. Is a essence really hard to obtain, and is very helpful for newcomers and also for experienced player, when crafted into healing potions. Increasing the ratio egg sack / essences will also help.
Thanks a lot for reading and for your time.

Bug Report6410NoCraftingLowNewSajut FogilRepair Armor: /repair legs instead of pants25.04.20141 Task Description

The description of the “Armor Repair Kit” says
“To use it equip the armor and type /repair <location> in the chat window. Example /repair boots ,/repair torso ,/repair gloves ,/repair arms” according to the examples it should be /repair pants to repair the “<armor type> Pants”.

Feature Request881NoCrafting TransformationsLowNewOFrank BartonRizinAngelaDavide VescoviniAnimal parts economy14.11.2023911 Task Description

I would suggest a specific hunting skill to “loot” animals instead of the current lottery system giving hides, claws, eyes, and whatnot.

Currently, anybody who can kill something can get enough parts by slaughtering a big amount of creatures. The skill would clearly separate the warriors from the hunters. Anyone can probably cut a rat’s tail, but skinning the animal is a bit more complex. And so on, some beasts will be more difficult to skin than others. Even proper meat is not obvious to extract from a carcass.

As a side effetc, maybe a killer could carry back the entire beast to a person capable of skinning/cutting it, if he doesn’t have the skill himself (it looks like some people can carry 400 kgs out there).

This incidentally could create a real market between players, akin to the economy currently existing around ore and weapons. Obviously, some PCs are going to be cooks, leatherworkers or alchemists.

This of course doesn’t apply to looting rogues, unless one can think of using human parts in some dark alchemy, or just carrying ears or heads as trophies.

Bug Report6517NoCrafting TransformationsMediumNewxolaTuathanachcombine parts with different qualities21.12.20141 Task Description

Crafting HA
combine 4 q300 medium steel plates with 1 q50 chain arms give worse quality then
combine 2 q300 large steel plates + 2 q300 medium steel plates with 1 q50 chain torso
there is the same amount of q300 ingerdients but its in one stack for arms and 2 stacks for torso
edit Quality 175 vs 227

Feature Request6556NoCrafting TransformationsMediumNewTharkasCraftable Repair Kits28.12.201455 Task Description

Wanted to bring up this idea to see how it would be taken in.

Given the difficulty training the skill itself involves, why not consider making the consumable repair kits for both weapons and armor craftable as part of the Tool Crafting skill?

Could be done in such a way that 1 steel stock would make 5 repair kits, or 2 steel ingots would make one.

This way, players can keep themselves supplied without having to keep spending money at the VERY NUMEROUS kits they’ll have to buy to raise their skill levels.

Feature Request6821NoCrafting TransformationsMediumNewKaerli StronwylleAdditional jewelry metals31.12.201732 Task Description

Right now, the only jewelry metals available in the game are gold, silver, and platinum, which leaves Ynnwn out in the cold RPwise. Considering that IRL, copper alloys (brasses and bronzes both) were and are still used for jewelrymaking – it would be logical to add those at some point down the road, to provide at least *one* Ynnwn-compatible option…

Feature Request5638NoCrashesHighNewMario RohkrämerOverhaul errorlog.txt usage, make it contain useful con...02.08.201415 Task Description

There are numerous (at least dozens) complaints in the forum that (especially under Windows) the errorlog.txt contains only uninteresting default errors which are not at all critical, but misses really useful and critical entries instead.

The whole “error console” concept is nonsense for Windows users. Windows builds don’t output anything useful in the console they are started from, and this would be the only console where output could be redirected to files.

If you call the client with the parameter “–console”, a new console is opened, but this one can’t be redirected with “>” or “2>”, you would have to mouse-select as much as you can keep in its history. Most PC users will not know enough about Windows to tweak this console window, maybe not even know how to select and copy from it. On Windows 7 it is even worse, when the client crashed, the new console is nearly disabled, so you almost cannot select and copy text from it after a crash.

Bug Report7725NoEffect SystemHighNewKiFunStuSMagic light is giving no light with low graphic setting...09.02.2023 Task Description

Magic light is giving no additional light in game after casting it.

on lowest graphics settings no light
on medium no light
on high there is light
epic graphics settings it is showing light

Bug Report7823NoEffectsLowNewKiFunStuSWater sounds being triggered where there is no water06.04.20234 Task Description

Walking bewtween

bdoorsout 105031.05 -749570.19 18103.3
to
bdoorsout 103880.74 -747535.50 17163.17

causes water sounds, does not always trigger,

1:50:30 on the stream is hopefully the right time
https://youtube.com/live/oG0gW69eDKE

example caught on video Will update with a new time stamp after stream has finished if I hopefully rememeber

Feature Request2349NoEngineLowNewInstallation Shortcuts19.04.20104 Task Description

Since players rely heavily on log files, and since some files like saved books and screenshots are created by the client in various folders, could the installation package please create shortcuts to these folders in the start menu on windows, and whatever the equivelant is on other platforms? Would certainly make it easier for players to find them when they need them.

Also either set the psupdater shortcut to include the CheckIntegrity flag as default or create a second one with that flag.

Feature Request3511NoEngineMediumNewSeytraIdeas for inventory accessibility15.02.201011 Task Description

While sacks and other containers are good for bulk storage, they have the significant drawback of making the inventory harder to navigate, and sorting as well, especially since one can always only have exactly one container window open.

To fix this, one might consider the following ideas:

1) allow any number of container windows to be open, so one can simply put stuff from one container into another, instead of having to put it into the main inventory first.

2) instead, make the container window, once opened, refresh by what container you click on, instead of having to go the rightclick-select-open route

3) instead, make any containers append to the main inventory slot space, but replace the first slot with an image of the container, and clearly separate the appended areas from each other and from the main inventory space by a diferent frame style (could be different for each container type), or at least some additional space. Also, slot spaces that are not provided by a container should remain blank so that a container always starts at the first (second) slot of a fresh line.

When selecting a container, the appropriate window / slot area frame should flash or something so that one sees which container has which window.

4) Let container windows be resizable, and possibly more compact by default.

Mounts

Having each mount have an own (player-accessible) inventory would allow:

1) armor / other enhancement slots for the mount
2) mules that actually are mules, not PCs
3) easier inventory handling

Maybe most of the extra inventory (handling like above) should not come from the mount itself, but from the saddle or whatever one uses on it. Without saddle, there would maybe only be two inventory slots or something.

Feature Request3553NoEngineMediumNewPascal DetraitIdea proposition for Drawing skill16.02.20102 Task Description

Hi,

the Drawing skill is not yet available.
I propose the following idea for developpers :

   Each save could rise the skill experience
   Each new created sketch could rise the skill experience, significatively more than the save function
   Each rank could rise the number of allowed element in the sketch
   Each "special" rank (defined by developpers) reached could allow new elements (ie. curves defined by 3 points, new icons, symbols, legend, several pages in the same map ...)

Best regards

Pascal Detrait

Showing tasks 51 - 100 of 652 Page 2 of 14 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing