PlaneShift

the gm /item window has many items listed in it, it would be much easier if you could just type the name of the item needed and it would show you the 3d mesh and the icon as if you had found it in the catagory selection section. this is very helpful for trying to see what something looks like without having to spawn it. as more and more items start to be added to laanx less and less people will be able to use the /item window to find items and will use /item <name> instead but that is a waste if they just want to view an item and have no use for it.

It would be nice if it was possible to zoom sketches when looking at them. This would also be useful when you get a sketch/map which is too big for your screen and allows you to have the entire image on screen by reducing zoom.

The included patch allows the user to zoom from 1/10 to 10x the map increasing the size of every element on screen.
The buttons used for this are > and < if someone has a better suggestion about them or thinks that having the increase/decrease zoom on screen would be useful i could add them.

http://pastebin.ca/1189613

How to reproduce:
do something which require much physical stamina: move many stuff in your bag, do something at anvil or something another.
and then run following commands:
/sit
/unmount
/target <PET NAME>
/mount ←– here your physical stamina will be full!!!
/stand

when snowing for 1 player, it is not snowing for another

Walking bewtween

bdoorsout 105031.05 -749570.19 18103.3
to
bdoorsout 103880.74 -747535.50 17163.17

causes water sounds, does not always trigger,

1:50:30 on the stream is hopefully the right time
https://youtube.com/live/oG0gW69eDKE

example caught on video Will update with a new time stamp after stream has finished if I hopefully rememeber

I would like to suggest an additional widget in the trade window that gives the total (NPC-trade) value of the goods offered, similar to the one for total tria offered. With the quality based pricing system, this could help to lower confusion and make trade and economy flourish. The obvious but neglectable downside is that players could abuse this to identify an enchanted items value without finding an NPC merchant. A solution to that problem could be found when thinking about a feature to identify such items (based on intelligence, dweomer detection, factions with merchants or whatever).

Mugs are a staple of RP for many people, but their use is currently quite unrealistic – you “drink” away a solid glass object.

What I proprose to fix this may not be purely realistic, but at least makes sense.

When an object is consumed, it should leave behind an “empty” (mug, potion bottle, jar, etc.) which will appear in the inventory. The cost of items which come in containers should be increased, as “deposit” or sorts, like when people buy pop or beer in real life. People would be able to sell the empty back to reclaim their deposit.

In the case of mugs of alcohol, they could be strewn about on the table as the drinking goes on, so people know who’s been drinking too much. There wouldn’t be any worry about “littering”, as there would always be someone willing to pick up after and return them to Allelia or Brado for the deposit money.

If this is implemented, it would also allow for future features like being able to return to Allelia or Brado for a “refill” without needing to pay the deposit. Same for potions and other items that are sold in containers.

Also the possibility of putting other liquids into the containers. It would be neat for example to be able to stop by the secret garden and fill up a bottle, mug or bucket with fresh water from the pool (it could be done by the usual right-click method on an object).

I feel these sorts of things would help improve the RP and realism a great deal.

It would be nice to use alias names from buddy list for /tell command.
e.g name: full_char_name, alias: Loyni.
/tell Loyni [text] could be translated itnernally to
/tell full_char_name [taxt].

An "Undo" button on the new music writer that could go back at least one step would be very helpful. Thanks!!

How about making it visible in Main if Players exchange items?
A system message appears to the ones trading anyways at this moment.
the message to others should however have some less precision, like:

 "<PlayerA> gave <PlayerB> Weapons and some coinage in exchange for raw materials"
 for someone trading a crafted longsword, a dagger, 2 hexa and a tria against 45 platinum ore and a silver ingot.

this in order to keep realism (can all see how many circles and tria he pushed into the other persons hand?)
the message could use the item_category, and eliminate doubles, so it could be done without giant changes to the database.

the advantages I would see in this:

 1.) there will be visible interaction between players. no more pure tell-based sales that (imho) are pretty ooc.
     Noone IRL (and especially not in the middle ages) would go into a shop and whisper in the cashiers ear what he whishes to sell or buy.
     Instead people going into a shop (not a supermarket) usually say good day followed by a statement on what they seek to buy (maybe even some smalltalk).
     Neither would such item exchange go unnoticed by other people in the shop or near the exchange.
     So I think it would add to realism. Unless the character you play would be blind.
 2.) Stealthy and sneaky exchanges of goods would have to take place in dark alleys, like sneaky things should be done.
 3.) Hopefully the messages in main would encurage Players to take the general and casual trade-talk into main as well,
     instead of hiding it in tells in order to not 'disturb' other players. 
     If IRL there are others talking near you, you step away a little to give and have more privacy as well.
 4.) It also would surely add some spying capabilities into the game, as it then could indeed be seen to all around who trades with who.
     This will make it possible to IC-ly spy on others trade behaviours. This without the need of having to be telling or grouping with the ones spied on. 

disadvantages:

 1.) Anyone could see who would trade with who, people who use quest runners would have to find a reason why they would get items for free.. 
     (or take the trade to a dark alley).
 2.) Someone could 'spam' the main-channel with trade messages. (but that's easier by sitting and standing up, or by dropping items and pick them up)
 3.) some things I probably didn't thik about yet. feel free to add..

Overall I think it would rather add to RP then desturb it.
For slipping items to others unnoticed, there could/should be a ‘/givesecret’ option that would use the numbers behind the pickpocket/sneaking skills.

Uses ranged sound attack

spams NPC chat tab with Attacks me using normal stance
and
emits A loud thundering noise

Does not actually attack me

In Fishing Lessons for Fish, the quest dialog does not match the quest notes for that particular task. In one possible task the player is told to get 6 eels and 7 manta rays, but the quest notes say 7 eels and 6 manta rays. The player seemed to indicate that it was the notes that were wrong, but isn’t online for me to double-check.

I hope it is technically possible to programmatically request a further execution of the launcher as administrator to be able to exchange binaries in UAC protected directories (%ProgramFiles% or %ProgramFiles(x86)% under Windows Vista/7/8…); and may it just be by the launcher calling itself as a new instance executed under the Administrator account.

Other platforms than Windows may require a similar solution.

Possible addition of the ability to teleport all PC’s enrolled in an event at once to avoid accidentally grabbing a passer by with the area option.

It would be nice if I could target a player with clicking his name in the group list

When you add a filter string to the /study window the empty lines between the item entries is lost such that you end up with long list of items. I think it might look better if the empty lines were maintained when a search string is entered

I tried attacking a kikiri with two ‘Dark Dagger’ and I got the following system messages

(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.

So every attack I do with two Dark Daggers is doing two rounds of extra damage and not just one extra round of damage.

Sometimes I would which i could sort the storage list in a different way. Would it be possible to add bi-directional sort options in the storage/buy window?

The skybox texture doesn’t seem to be correctly scaled to the skyboxes. Its borders are cropped and this results in very sharp and somewhat odd skylines:

PS 0.5.5

An newbie in the tutorial brought up this idea, and I like it a lot:
It would be nice if the char creation provided a clickable link or a pop-up window to the naming policy.

Now we have space for 200 shortcuts/Macros it would be useful if one could group sets of shortcuts into their own subwindow so one could have a window for combat shortcuts, a window for crafting, a window for RP shortcuts etc.

It could be fixed 4×20 8×10 or user selectable

There should be a way for players in groups to share quests they are doing. So they could talk with others about them and do them together. All will get the quest complete when they complete the task given by the npc (and maybe a copy of the reward for each one): this could make quest allow players to socialize more.
The biggest problems in implementation could be the case in which quests might overlap, the fact players might want to chose the quest they want to share and the variations which could be in dialogs when talking with a group of people versus a single one.
The players will get the shared quests added automatically even if they didn’t have them provided they have the correct prerequisites

It would be nice to bea able to make a bag in your inventory the default collection bag.

I think sorting things after that should be manual thou.

When an npc talks the volume of the music ect makes it hard to hear them. Lets try setting all volume to 20% or so and see how that effects it.

With a weight of 9 and a size of 9, the model of “White Oak Wood” appears to be way too large. Such a big heap of wood would weight more than 50 kg. In contrast, the icon is such a tiny poking stick…

Saving throw commands for Roleplay

Example:

/dodge

ROLL =< AGI results in “[player] dodges.” ROLL > AGI results in “[player] does not dodge.”

/jump

ROLL =< AGI results in “[player] makes jump.” ROLL > AGI results in “[player] misses jump.”

/sing

ROLL =< CHA results in “[player] sings a lovely song.” ROLL > CHA results in “[player] lets out an awful screech!”

ROLL = random(200)

Might also be expressed like…

/saving agi dodge dodges|does not dodge
/saving agi jump makes jump|misses jump
/saving cha sing sings a lovely song|lets out an awful screech!

Variations on this are almost endless and could apply to any stat or skill. Saving throw commands are designed to be used by a single player, with the results shown in the channel originating the command.

I consider it unrealistic how terrain is (not) interacting with movement.

As far as I know, in real life, every meter up is as taxing as ten meters across. (The factor of 10 is from a schoolbok, it might be a good idea to verify this from a professional source.)
Going downwards requires concentration to avoid slipping and falling, and a surprisingly large amount of strength to absorb the shock from “falling” the height would lose with every step. (Walk down 250 metres of a moderately steep slope with a backpack on your shoulders and you’ll know what I mean.)

In terms of game mechanics, this would mean:
* When running upwards, the speed should decrease and stamina loss should increase, and the cumulative effect of these two changes should be drastic. It’s possible to trade one change for the other: keeping the speed unchanged and massively increasing stamina loss would force players to rest, keeping the stamina loss constant would call for a massive speed reduction. However, I think it should be a little of both since that causes interesting effects (see below under “game experience”).
* When walking downwards, there should be no stamina loss (you can make the physics work for you), and you should be faster, but you lose mental stamina. The less your mental stamina is, the higher the probability of slipping and falling. If you fall on a too-steep slope, you continue skidding. Falling should do damage that’s proportional to the total weight (character + load), blunt damage (not much help from armor); skidding should do damage-over-time, armor protecting fully (essentially this is abrasive damage, which is similar to slash - but don’t give characters armor training from that).

In terms of game experience, this would mean:
* Getting up on a slope is a time-consuming experience, and almost never worth avoiding the walk around the hill. People will stay on the paths in the valleys. This will cause more interaction between normal travellers (and make Cutthroat Lane work better for the Cutthroads, too). It will also make people who leave the road more likely to remain undetected.
* The Settings team can make NPCs less accessible and less likely to be found by placing them on a hilltop, or in a valley behind mountain pass.
* Players with maxed stats have less issues with upward slopes than newbies, but they will still avoid slopes unless they have reason to.
* Hilltops will become a tactical advantage. An attacker will need far more time to reach a defender on the top, and expose himself to ranged combat for a longer time. (Take this into consideration when reducing the effectiveness of long-range combat spells; ideally, a mage would win against a fighter from a hilltop, and lose against a fighter on even ground.)
* Hilltops also become a bit of a trap. Defenders forced to flee from a hilltop risk falling and getting overwhelmed.
* Pursuing down a hilltop is problematic due to risk of falling. Defenders might want to hide a pursuit team in a nearby valley that’s near the height of the route of the attackers, though that would force them to split up forces. Decisions, decisions… which means tactical variation, which is a Good Thing when it comes to making the combat aspects of the game interesting :)
* Reaching the Eagle Bronze Doors takes a lot of time already, making them even less reachable will no doubt make many players very unhappy. An alchemist that sells stamina regeneration potions at the bottom of the path up would help with that.

Just my 5 cents :)
(and no, I don’t expect this to be implemented anytime soon :D )

these two npcs need to be separated a bit outside their house at 1 AM

When you try to kill some kind of MOBs, usually humanoids, with the ability to heal themselves, they keep resurrecting.
You can easily see this in Camp Banished. When the foe reachs a health threshold it starts casting healing flash several times. It seems that there is a sort of queue filled with the spells, and the foe keeps resurrecting until you kill him in a moment he is not casting the healing spell.
This is the opposite of the previous behaviour where the opponent was just dying several times.

The description of the “Armor Repair Kit” says
“To use it equip the armor and type /repair <location> in the chat window. Example /repair boots ,/repair torso ,/repair gloves ,/repair arms” according to the examples it should be /repair pants to repair the “<armor type> Pants”.

FR by Vakachehk:

I have an idea for mounts which will need some changes to some maps.
For Rivnaks (maybe Drifters too) having stables in which without a ring you may summon them, and dismiss them, without any skill of any ring needed, maybe a tria fee of like 50trias every summon/dismiss (of course there's the obvious issue you un-mount and leave your Rivnak somewhere, either the game automatically dismisses it or it is able to be stolen via a player, or a mechanical guard comes and takes it back to the stable or whatever). Using your Ring of Summon Familiar you can use the skill Empathy to dismiss/summon/etc, anywhere at any time.
Also I was thinking about the skill 'Riding' maybe this could be trainable and used in combat while on your rivnak?

spells that give buffs should have their duration reset upon further castings instead of casting having no effect within the spells duration.

If I cast defensive wind, currently subsequent castings have no effect while the spell is active. Could this be changed so that the second spell restarts the duration timer?

Related to: http://hydlaa.com/flyspray_upgrade/index.php?do=details&task_id=611&histring=crafting

Goal of this feature request: To provide an alternative to the numerously unneeded clicking and dragging through the addition of additional options.

Possibilities:

1. Allow all targeting equipment to be targeted and add short cut commands as discussed in http://hydlaa.com/smf/index.php?topic=30727.0;topicseen and http://hydlaa.com/smf/index.php?topic=28284.0 .

1B. Add a /place command that would place a specified number of a specified item into a targeted container.

1C. Add a /remove command that would remove a specified number of a specified item from a targeted container.

1D. Add a /combine command that has the same functionality as the combine button that is on the right click menu.

2. Have the stock casting containers automatically convert large stacks of molten ore to the largest possible unit. (IE: A stack of 63 Molten Iron would yield a stack of 6 Iron Stocks and 3 Iron Ingots.)

2B. Add a button and command to Stock Casting that will toggle that will allow the user to cast only ingots.

2C. Allow the user to combine large amounts of objects at a time so long as the proper amounts of objects are present. (IE: 81 Iron ore and 9 Coal ore would yield 90 Molten Steel. Also, you could combine 10 sword handles with 10 sword blades to quickly put together 10 swords.)

3. Add a key to be pressed and held that would allow the user to pick up an entire stack.

I believe that there has been discussion of several other alterative on the forums.

Thank you for your time:
- Tontow

You can easily shoot with a bow ingame to ranges far beyond the range of combat messages. Mob aggro (and sometimes the archery anim) do not work at such long ranges, either.

There are several issues I experienced during testing the Character Creation / Race Selection:

• Hair style is hard to check if manual rotation is necessary during zoomed view.
• Male Ylian: blonde/brown are confusing names for face textures, they should possibly be changed to emotions. Blonde 1 and Blonde 2 appear identical.
• Male Dermorian: Face style “Forehead tatoo …” is too long to be readable completely
• Female Dermorian: “Medium” style is shorter than “Short” style
• Stonehammer: Race description still mentions “Stonebreaker”. Many descriptions may need an update after the race renovation.
• Male Stonebreaker (and others): Hair and Beard styles may need a more descriptive name.
• Female Stonehammer: Traits seem to be misordered. If “Braids” are the two long upper tails, and “Rivnak tail” should probably be the one long tail, then “Lavvar tail” should instead be the two small low tails? What is a Lavvar, anyway?
• Kran: I’d prefer visually disabling both male and female gender buttons. Leaving the female activated might be confusing.
• Female Ynnwn: Face style “White eyes” doesn’t use white eyes. The name should possibly be changed, e.g. “Aged” (in contrast to “Young”).

There are quests with almost no automatic quest notes documenting the progress, except for the first note describing the purpose of the quest. This is especially annoying when you have to get a specific number of items and need to scan your logs, like in old times before automatic quest notes were implemented…

Open quests are in italics, the rest is already completed.

• A Hammer for Hamel (Hamel Warson; only 2 notes, the second is confusing - sounds as if the quest failed)
• Drinks in the Deep (Crosh Dunehammer)
• Get a Performance (Roya Vuntarr; just started, but already missing a log of the direction where to go)
• Harnquist Weapon Commission (Harnquist)
• Introduction to Science (Durok Rrecrok)
• Ring of Familiar (Levrus; just started, but already missing a log of the required ingredients)

As with other windows with 1600 by 1000 and other similar ratios it does not fit on the screen properly.

As reported by Stalfos

“Something’s Brewing” If you accept Narwin’s drink ““Thought you’ nev’ offer!…” the other option doesn’t disappear: “How many times must I tell you,…” you can’t get the kegs until you click it. Later Jarda also has both options available, the drunken and sober speech options.

“Kimlorm Needs a New Prayer Book”, “Kimlorm sent me” remains an option after you have clicked it.

A general problem with the quest menu system at the moment is the speed at menu disappear. The problem occurs in the following situation.

All the following is within one step in the following format.

Player gives NPC 1 item.
Menu: text.
NPC: text.
Menu: No. Menu: Yes.
NPC: text.
NPC: text.
Give 1 Melorick's Scroll Case.
Assign Quest.

You give the npc the item.
The initial npc text appears.
Once they have finished talking the next two menus appear, but before you are able to click on the menus the menus vanish.
This results in you losing the item needed to trigger the quest/step and are unable to repeat it.
This was only became a problem with the introduction of the 'bubble' menu system.

There are many time in quests and KAs when they have the same trigger, for example “about armor” or “about apples”.

When you click a quest menu (or type some text to an NPC) the first dialogue(s) to be searched should be quests and if a matching trigger is found the quest menu should be sent, then if nothing is found in a quest it should search KAs. What is currently happening when you have two or more matching triggers you are getting a random choice between the quest response and the KA response. This results in players getting what seems to be a response from the NPC but the quest does not continue.

I’ve updated the bug to reflect what is happening with the current code, r9606

At the moment the following option will show “red apple (1 of 2) (1/2)” and “red apple (1 of 2) (2/2)” for the menu pair Menu: no. Menu: yes.

…

P:RA.
Menu: bla.
Smith: wana help.
P:RA1. P:RA2.
Menu: no. Menu: yes.
Smith: shame.
Smith: good.
Complete red apple step 4.

It seems there are now duplicate code checks for counting subsets, or duplicate displays of one counting. This option should really show “red apple (1/2)” and “red apple (2/2)”.

Also now, when you have 8 menus visible from many different quests the number shown is (1/8)-(8/7) so it is done on a total number of menus available, not on a by quest basis. For example, if you have 3 quests active and 8 steps the numbering could be (1/3)(2/3)(3/3), (1/2)(2/2), (1/3)(2/3)(3/3)

Until today I did not know that “Camp Banished” is a PvP area at all. Until I got killed.

I was asked by a GM “if I did not expect that”?! - No, I did not! I see everything as a roleplaying incentive, unless I get a system message warning me about changed world attributes.

This issue is “critical”, because inside this PvP area are quest relevant NPCs. Now, what would happen if you are in a quest dialog with an NPC, and get killed? - You would lose that quest. And if it was a one-time quest, you’ll lose it forever, for your char.

This almost happened to Cadwen today, whom I helped to deliver a “Keg of beer for Filch”. Fortunately the keg was not stolen while we returned from the Death Realm.

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

when I casted Prayer.

it reapeats the following for each target affected
you sing a prayer,healing everyone who can hear you for 176 points

the spell blessed litany lists all the players affected
you sing a litany, healing %player for XX points and XX stamina

This happens also in Legacy.

We have potions that improve stats, we have potions that improve magic skill, how about potions that improve combat skills and job skills? make alchemists have a little more value :)

Function to set a guarded item as sellable, with price.

/sellitem name price

Confirmation for sale, confirming price to purchaser.
Confirmation text message/description in main when sale has occurred.

Would need at least a button visible in context menu to initiate sale.
Set item for sale and price could be command-line, that’d still work.

As the title suggests all magic items made by crafters need to be identified. As every magically crafted item made the same way ends up giving exactly the same buff, there is logically no need for the crafter to need to identify an item as they will always know what it will do…

window resizing has no effect on the displayed information.

or that is as indented, and there should be no resize for it.

Now that we have a working pet AI that can properly follow a player it may be an appropriate time to suggest the addition of something to cater to tradesmen such as traveling merchants and miners who are frequently overloaded by the weight of their inventory.

There is already evidence of large beasts of burden and carts in game and it may be time to implement Pack Animals or a small cart you can pull yourself to increase your overall carrying capacity. aside from the obvious utility value it would also add some RP value allowing merchants to sell directly out of their carts and have enough inventory on hand to negotiate deals along the roads.

There are numerous (at least dozens) complaints in the forum that (especially under Windows) the errorlog.txt contains only uninteresting default errors which are not at all critical, but misses really useful and critical entries instead.

The whole “error console” concept is nonsense for Windows users. Windows builds don’t output anything useful in the console they are started from, and this would be the only console where output could be redirected to files.

If you call the client with the parameter “–console”, a new console is opened, but this one can’t be redirected with “>” or “2>”, you would have to mouse-select as much as you can keep in its history. Most PC users will not know enough about Windows to tweak this console window, maybe not even know how to select and copy from it. On Windows 7 it is even worse, when the client crashed, the new console is nearly disabled, so you almost cannot select and copy text from it after a crash.