PlaneShift

Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.

Thank you for your time and attention. ~Timil~

The text in speech bubbles is hardly readable. It seems that the black shadow covers the bright colored text.

Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.

Fri May  4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May  4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!

for now I added:

<Sound name="amb-day_forrest_4"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

after:

<Sound name="amb-day_forrest_3"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.

Probably losely related to PS#5629

Grinding Kingsfoil or Wyn Pulp to Paste works in a reasonable time.

But trying the same with Red Mangrove or Sinaflar takes much more time than my Mental Stamina (669) offers. The result is a "Pile of Dust". Did someone move a decimal position?

lesser piles of dust (seem to be from emeralds) get assigned a number that is negative. As these are not loot they should not be going through the function that assigns a value. Crafted weapons do not get a value.

If I get a new quest while the quest & event notebook window is open, the quest doesn’t appear in the list until I close and reopen the window. Can getting a new quest cause a refresh of the list of uncompleted quests?

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

I would enjoy reading a bit of the Greataxe Nyshyn identified. But the scroll is empty.

Nothing major at all, but I cannot change the severity. Is that up to the poster?

Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.

I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :

http://lbalbalba.x90x.net/clang-analyzer/planeshift/

I made a char with a very short name (Min).
Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line
gets highlighted in blue.

Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?

If I have no weapons while in battle and I take out swords, I continue fighting with no weapons. If I stop attacking and then start again, the swords get used.

I think the dungeon is darker at night. I need a torch then. This makes no sense.

1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…

2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.

Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:

Now: “When they’re all to the right, I move them all back and move bead in a second line…“
Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“

This can be fixed with brightness increse / decrease, but still wierd.

Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8

Report data:

51.0737 2.32624 -133.063
0.416704 -0 0.909042
-0.184466 0.979195 0.084559
-0.890129 -0.202923 0.408035
"hydlaa_plaza"
0

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

My character was attacking a Rogue in fully defensive mode with the following spells active and the damage was not noticeably reduced.

Animate Vegetation
Armoured Skin
Defensive Wind
Dome of Perfection
Lesser Future Sight
Rock Armor
Water Barrier

This is ridiculous.
One of these spells should have some protective effect and all of them active at the same time should have some additive effect.
Character was wearing no armor at the time.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

Several times now a sheet of music I have been editing would, after I closed it and reopened it, display only the first line, even when I went back to edit mode, had already saved it, loaded it to a second sheet, and restarted the game.
Needless to say, this is making it impossible to finish writing the piece of music!

/pos: bdoorsin -180.54 19.71 -864.52

How to reproduce: Run into the area between the large boulder and the cliff face there.

What should happen: Your char should, at worst, have to /unstick out of it, or be respawned due to the map leak.

What does happen:

1. Your char (sometimes) gets ‘leaked’ off the map and starts to fall through it
2. As your char falls, they get put back in the normal map area because of the concavity of the cliff face below the path there.
3. Result: a DR trip, because your character goes “splat” at the bottom of the Bronze Doors canyon.

Over numerous days my character has left items on the Gug altar. After un-guarding them with /guard they are checked and seen not to be guarded by the character anymore. Upon return on a subsequent login they are found to be guarded by the character again. The same items have been un-guarded several times with the same result.

when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite?
the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).

I was working on a batch of Liquid Bread Rise and kept getting “You are not sure what to do with this.” I realize this will probably be nearly impossible to reproduce so I’ll try to explain as best I can exactly what I was doing.

I had started by combining the ingredients (1 Foaming Water, 2 Pinches of Salt, 14 Scoops of Lard) on the preparation table, yielding Unmixed Liquid Bread Dough. Then decided to combine them in the wooden bowl so I could go straight to the mixing step. I had already combined 3 when I switched. I added the ingredients to the wooden bowl and combined, letting it automatically do the mixing step, and this worked fine. The I tried to mix the Unmixed Liquid Bread Dough I had previously combined on the table and that is when I got the “You are not sure what to do with this” message. As long as I combined the items in the wooden bowl and then mixed them I had no trouble. If I tried to put in previously combined Unmixed Liquid Bread Dough it gave me the error message. Several times I reflexively hit the Take All and Stack before it was mixed, and when I tried to put it back in the bowl and mix it I got the error message.
Eventually I had to stop and measure out more scoops of lard, which required switching my wooden spoon for the scoop, since I was also holding a Dagger of Seduction (and wearing a Merc Helm of Seduction, if that matters). After I switched back, I was able to mix the Unmixed Liquid Bread Dough without any trouble… for awhile. (I didn’t realize right away that was what made it work)
Eventually though the problem popped up again (when I prematurely grabbed the mix before it was done, and tried to put it back and finish mixing it, it said “You are not sure what to do with this”) Again, the problem resolved when I switched to measuring lard and back. This happened three times in all. I didn’t put together that it was when I switched tasks that it started working until the third time it happened, so I didn’t have a chance to try just switching tools to see if that was what was fixing it.

I Was going to make some apple jam biscuits recently as requested by Harnquist but I could not for the life of me find them in any of my cookbooks (I have all four!). Since Harnquist asked for it, I was pretty sure I could make it and took a guess that it should be in the Pastry Chef book that has the jam recipe and open biscuits. With that book in Mind, I was able to make the Apple Jam Biscuits, but I never did actually FIND the recipe. I checked with another cook just to make sure, and she couldn’t find it either. She also pointed out that the Bread with Apple Jam is also missing (the other Bread with Duppong/Teveran/Macca/Joopiner Jam and Duppong/Teveran/Macca/Joopiner Jam Biscuits, as well as the Bread with Butter and Buttered Biscuits are also missing.)

In the Making Enchanted Armor book I discovered that the skills you cannot do are not grayed out (AFTER I tried something, was told I didn’t have the skill, and looked more closely at my book! It does say the usual “WIth higher skill you could blah, blah, blah” but it’s the same color as the rest of the text).

There are quests with almost no automatic quest notes documenting the progress, except for the first note describing the purpose of the quest. This is especially annoying when you have to get a specific number of items and need to scan your logs, like in old times before automatic quest notes were implemented…

Open quests are in italics, the rest is already completed.

• A Hammer for Hamel (Hamel Warson; only 2 notes, the second is confusing - sounds as if the quest failed)
• Drinks in the Deep (Crosh Dunehammer)
• Get a Performance (Roya Vuntarr; just started, but already missing a log of the direction where to go)
• Harnquist Weapon Commission (Harnquist)
• Introduction to Science (Durok Rrecrok)
• Ring of Familiar (Levrus; just started, but already missing a log of the required ingredients)

When you trade with and NPC and it is walking, it won’t stop, and you will no longer be able to buy or sell anything from it, since it will be far away from where you started to trade…

I noticed in a characters inventory that “The pastry Chef” book was not displayed as an icon, but was displayed as text “The Pastry Chef”.

It appears that the newest icons have not been loaded or are not reference correctly from MyPlane.

(I think the severity is low, but I was unable to change it.)

I have spent days trying to name my drifter with various names. I have confirmed I am using the correct command. /pet name [name] while having the drifter highlighted. I also tried various versions of this…
/pet name {name}
/pet 1, name [name]
/pet 1, name {name}
along with many, many different names. They all come back invalid.

Then, after several days of trying, I received the message, “You have no familiar to command.” So, I tried to dismiss my familiar and received the message, “Your pet has already returned to the netherworld.” I was standing there, in game, looking at the glider when I received all these messages. So I tried to summon the pet and another one popped up, so I had two in game at the same time, both named, Aszrai’s Familiar.

If nothing else, please remove the second (or both) familiar from the game. But it would be nice to find a way to name my familiar, but not a priority.

I have an image, which shows them both near the smithy in Hydlaa, but I was unable to figure out how to attach it here. I’m sure one drifter will stick around at the smithy for quite some time.

Thanks for your time and help!

For an example.

In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.

The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.

This appears to be an option to have lines that appear in Main chat prefaced by origin e.g. [guild], [alliance], etc., provided a user has filtered messages from other chat tabs to appear in Main. However, it seems to work whether or not the option is enabled. Is this a bug or just deliberately no longer an option?

Regardless of which of the three options is selected, communication seems to switch the active tab automatically to Main if the current tab can't display it. Bug or intentional?

messages.cpp misses another operand?

if(command == “/newguild” || command == “/endguild” || command == “/guildname” || command == “/guildpoints” || command == “/allianceleader”)

 {
     guildname = words.GetTail(1);
     return;
 }

Setting guild MOTD is accidently tied to public notes privilege?

guildmanager.cpp

  if ( ! IsLeader(client))
      if ( ! CheckClientRights(client, RIGHTS_EDIT_PUBLIC, "You do not have rights to change the message of the day in your guild."))
          return;

My understanding is that /setmemberpermissions [member-name] should allow a user with editing permissions to set/change individual guild member permissions, but the command seems to be broken. A bug or intentional?

Drifters Section

“This gas is highly acidic and damages a persons equipped items if they stand in the mist.”

This should be changed to:

This gas is highly acidic and damages a person’s equipped items if they stand in the mist.

Note the apostrophe to indicate a singular possessive noun (person’s).

Perhaps it's just me, but while Electrotouch is in effect there's a constant grating buzzing sound that just hurts like nails on a chalkboard.

For crafting book /use command equips book in mind slot - and it’s OK, I think.
But how to open crafting book for reading, as of RMB click in inventory?

Then dragging a book from inventory to shortcut window, /use command is created.
But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty).
Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…

After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(

/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” -
but this syntax described in a Help window! And /write [slot-name] syntax works as expected.

I think it’s clear that /read command for a books must exist to make complete set. Some use cases:

* want to read any book - use /read [item-name] or /read [slot-name]
* want to write to a writable book - use /write [item-name] or /write [slot-name]
* want to equip / dequip any book - use /equip and /dequip commands

Sane default results for /use command:

* Crafting book - equip in a mind slot.

It's a reference book, to take a look from time to time in a crafting process, after all.

* Common book and writable book - open book reading window. Using a book in a real world means “read it”.

Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.

When a male nolthrir is mounted on a rivnak his legs stick into the rivnak.

I've noticed that the sound effects for things like fountains and fires seem to be based on where the camera is located, not where the player is.

To demonstrate, go to 3rd person follow mode and move the camera well back from the character. Position the character near a sound generating item (fireplace in front of temple works). You won't hear it. Move away from the object so that the camera is next to it and you will hear it.

When you try to kill some kind of MOBs, usually humanoids, with the ability to heal themselves, they keep resurrecting.
You can easily see this in Camp Banished. When the foe reachs a health threshold it starts casting healing flash several times. It seems that there is a sort of queue filled with the spells, and the foe keeps resurrecting until you kill him in a moment he is not casting the healing spell.
This is the opposite of the previous behaviour where the opponent was just dying several times.

In the current state, if you have focus in the text box of the chat, none of your shortcut hotkeys work, even if they’re mapped to keys that do nothing in the chatbox, such as F1-12, Ctrl, Alt, Tab, Pause, etc.

I’m filing this as a bug report, because either this should be “fixed” so we can map shortcuts to such keys so they will still work while chatting, or the team can decide this is “not a bug” and close it.

The “fix” therefore, is to trap only those keys that chatbox can deal with, and forward anything else to the shortcut processor, so while typing in chat W A S D would be trapped in chat, and F3 would fire the shortcut it’s mapped to.

Crashes sometimes occur while unequipping a Master’s Dark Way Wand or mounting while it is equipped.

I've just tested some Pet commands (by using a summoned familiar) and the following commands don't seem to reach the familiar NPC:
/pet [name,] assist
/pet [name,] guard
/pet [name,] run
/pet [name,] walk

Please note the Minion behaviour used for pets is using almost the same data in SVN. The steps I used to replicate the bug:
1. summoned a familiar
2. issue a command /pet [name,] follow/stopattack/stay/run/walk
3. use the /info command to know the last perceived command.

When reaching step 3 the info command should show something like that:
(12:08:36) [System] >Last perception: ownercmd:stopattack
instead for the above commands an error message is outputted (just like the command was wrongly typed or isn't recognized).

By using the percept command on the NPC like /percept ownercmd:run the behaviour is correctly run and works as expected.

Also please note that assist/guard commands appear in the help.xml file while the new run/walk don't.

the command "/pet Petname, dismiss" stopped working in the last few days.

"/pet $number, dismiss" does not work either.

The following does work:

/target Petname
/pet dismiss

Sometimes when I’m attacking NPCs with a spell, I’ll see the following messages:

“I failed to move, will teleport in 5 sec.” “I was teleported here, waiting 5 sec.” “now I located the spawn point.”

I’ve had this happen with rogues in Ojaveda and in the Sewers where there don’t appear to be any obstacles to their movement.

It’s really annoying to have to go track down the NPC to finish it off.

The screenshots pretty much tell the whole story.

1) Have char A (Primatus for me) enter the GH and sit on some furniture.
2) Have char B (Sabor) log into the GH.

A on A’s client is atop the furniture, while on B’s client A is in the furniture. Probably a symptom of the known issues with object spawning in PS, but still….really guys?

When you use a shape-shifting spell like Gorwealform (assuming the same holds for Polymorph) while mounted, the speed is not set correctly and you can reach no more than walking speed afterwards.

This is kind of stupid, but I noticed that if you run pslaunch, then click on “Play” before the client version and launcher version is displayed, the client will crash. It might not hurt to lock the play button until the launcher is fully initialized. Its a small bug, but probably quite easy to fix.