PlaneShift

Task Type  ascIDPrivateCategorySeverityStatusOpened byAssigned ToSummaryLast Edited[[changedby]]
Bug Report6272NoEngineMediumUnconfirmedNoobMaster's Dark Way Wand Crashes12.04.201432 Task Description

Crashes sometimes occur while unequipping a Master’s Dark Way Wand or mounting while it is equipped.

Bug Report6332NoClient start-upMediumUnconfirmedRigwyn SetsonCrash starting client14.05.20143 Task Description

This is kind of stupid, but I noticed that if you run pslaunch, then click on “Play” before the client version and launcher version is displayed, the client will crash. It might not hurt to lock the play button until the launcher is fully initialized. Its a small bug, but probably quite easy to fix.

Bug Report6386NoUpdater/PSLaunchMediumNewxolaincompatibile skin09.04.20143 Task Description

i have seen people who log and quit(crashing) in second due using incompatibile skin
update and repair should set skin to default elves .reinstaling ps propably will not help because these configuations are in diferent folder

Bug Report6512NoCombatMediumUnconfirmedxolaflame spire07.08.20143 Task Description

when flame spire or animate vegetion kill enemy it swich from agresive to fuldefensive mode , enemy is already dead ant it shall stop atack

Bug Report6574NoRulesMediumUnconfirmedmike loevenDavide VescoviniDiseased Rats display Improper implimentation of the ra...30.05.20203 Task Description

The Diseased rats improperly apply the raging feaver effect to nearby players who are not interacting with it.

The majority of illnesses carried by rodents require physical contact or a bite to be transmitted and this effect should not be applied to someone simply walking by unless the rat targets and attacks the player directly. additionally since the diseased rats do not attack players unprovoked their AI has no business targeting players with an effect without being in combat

additionally healing potions and or crystal way should remove this effect as it is not a magical curse but rather a mundane sickness

lastly as a minor effect caused by combat with a monster the duration of raging fever lasts far too long for a monster of such a low level as a general rule of MMO's no status debuff caused by a monster should last more than at most 2-3 minutes after the end of a combat encounter and those that do should have easily accessible means of counteracting it such as potions or spells.

Bug Report6783NoEngineMediumUnconfirmedIridiaJoe LyonShortcutname removed on button move when an icon is use...05.03.201532 Task Description

When a shortcut that uses an icon is moved the name of the shortcut disappears and is replaced with the shortcut number.

Bug Report6878NoCraftingMediumUnconfirmedKanubyTuathanachMace Making practice points inconsistent with other cra...19.11.201731 Task Description

The Mace Making Practice Points seem to be inconsistent with other crafting. With a skill level of less than 20, everything only takes 5 seconds to make regardless of the complexity of the item being crafted.
Wondering if a higher blacksmith skill is weighted more. Only getting 5 pp per item crafted will extend leveling ability time dramatically.

Bug Report6920NoQuestsMediumUnconfirmedStalfosA Sapling of Xiosia - Does not complete when completing...11.03.20223 Task Description

I’ve completed the child quest that looks for the Boss around Gugrontid, but Sapling of Xiosia hasn’t completed as well.

Bug Report7089NoGUILowUnconfirmedMauiSkill window - scrollbar not always visible22.11.20223 Task Description

at the job bar tab is no scrollbar available,for some its there only if they max out the size of the window

Bug Report7226NoUser InterfaceLowUnconfirmedschluopening small inventory window from the furnace window ...07.03.20233 Task Description

Select furnace, click on “look” icon. In opened window none of the icons open your personal inventory… Some of these Icons also got the wrong description when hoovering them

Bug Report7258NoBugtrackerLowUnconfirmedHaviland Tenourisegmentation fault in hydlaa VK_ERROR_DEVICE_LOST24.11.20223 Task Description

Not sure what causes the client to crash. But it seems reproducible when I turn around.

System is Linux 5.8.0-59
Ubuntu bullseye
mesa 20.2.6-0
NVidia GeForce GTX 970
Driver Version: 460.91.03
CUDA Version: 11.2

[2021.07.31-21.33.40:344][840]LogRHI: Timed out while waiting for GPU to catch up on occlusion results. (0.5 s)
[2021.07.31-21.33.40:420][840]LogVulkanRHI: Error: Result failed, VkResult=-4
at /home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanMemory.cpp:4742
with error VK_ERROR_DEVICE_LOST
Fatal error: [File:/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanUtil.cpp] [Line: 803]
Result failed, VkResult=-4
at /home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanMemory.cpp:4742
with error VK_ERROR_DEVICE_LOST
Signal 11 caught.
Malloc Size=65538 LargeMemoryPoolOffset=65554
CommonUnixCrashHandler: Signal=11
[2021.07.31-21.33.40:480][840]LogCore:

Critical error:

Unhandled Exception: SIGSEGV: invalid attempt to write memory at address 0×0000000000000003

[2021.07.31-21.33.40:480][840]LogCore: Fatal error: [File:/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanUtil.cpp] [Line: 803]
Result failed, VkResult=-4
at /home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanMemory.cpp:4742
with error VK_ERROR_DEVICE_LOST
0x0000000004445d9b PSUnrealClient!VulkanRHI::VerifyVulkanResult(VkResult, char const*, char const*, unsigned int) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanUtil.cpp:802]
0×0000000004422322 PSUnrealClient!VulkanRHI::FFenceManager::WaitForFence(VulkanRHI::FFence*, unsigned long long) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanMemory.cpp:4742]
0x00000000043fe84d PSUnrealClient!FVulkanCommandBufferManager::WaitForCmdBuffer(FVulkanCmdBuffer*, float) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanCommandBuffer.cpp:457]
0x000000000446288e PSUnrealClient!FVulkanViewport::WaitForFrameEventCompletion() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanViewport.cpp:296]
0x000000000444795c PSUnrealClient!FVulkanViewport::Present(FVulkanCommandListContext*, FVulkanCmdBuffer*, FVulkanQueue*, FVulkanQueue*, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanViewport.cpp:939]
0×0000000004447098 PSUnrealClient!FVulkanCommandListContext::RHIEndDrawingViewport(FRHIViewport*, bool, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanRHI.cpp:889]
0x000000000450fcd0 PSUnrealClient!FRHICommandListExecutor::ExecuteInner_DoExecute(FRHICommandListBase&) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RHI/Private/RHICommandList.cpp:373]
0x0000000004526d97 PSUnrealClient!FExecuteRHIThreadTask::DoTask(ENamedThreads::Type, TRefCountPtr<FGraphEvent> const&) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RHI/Private/RHICommandList.cpp:428]
0x0000000004526bb5 PSUnrealClient!TGraphTask<FExecuteRHIThreadTask>::ExecuteTask(TArray<FBaseGraphTask*, TSizedDefaultAllocator<32> >&, ENamedThreads::Type) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Public/Async/TaskGraphInterfaces.h:886]
0x0000000002e8b1f6 PSUnrealClient!FNamedTaskThread::ProcessTasksNamedThread(int, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/Async/TaskGraph.cpp:709]
0x0000000002e8ad9e PSUnrealClient!FNamedTaskThread::ProcessTasksUntilQuit(int) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/Async/TaskGraph.cpp:600]
0x0000000004552ab6 PSUnrealClient!FRHIThread::Run() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RenderCore/Private/RenderingThread.cpp:319]
0x0000000002ee0017 PSUnrealClient!FRunnableThreadPThread::Run() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/HAL/PThreadRunnableThread.cpp:25]
0x0000000002ec01fc PSUnrealClient!FRunnableThreadPThread::_ThreadProc(void*) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/HAL/PThreadRunnableThread.h:185]
0x00007fab15c94609 libpthread.so.0!UnknownFunction(0×9608)
0x00007fab1529a293 libc.so.6!clone(+0×42)

0x0000000002ea96ee PSUnrealClient!FGenericPlatformMisc::RaiseException(unsigned int) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/GenericPlatform/GenericPlatformMisc.cpp:472]
0x0000000002fccd9b PSUnrealClient!FOutputDevice::LogfImpl(char16_t const*, …) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/Misc/OutputDevice.cpp:61]
0x0000000004445d9b PSUnrealClient!VulkanRHI::VerifyVulkanResult(VkResult, char const*, char const*, unsigned int) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanUtil.cpp:802]
0×0000000004422322 PSUnrealClient!VulkanRHI::FFenceManager::WaitForFence(VulkanRHI::FFence*, unsigned long long) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanMemory.cpp:4742]
0x00000000043fe84d PSUnrealClient!FVulkanCommandBufferManager::WaitForCmdBuffer(FVulkanCmdBuffer*, float) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanCommandBuffer.cpp:457]
0x000000000446288e PSUnrealClient!FVulkanViewport::WaitForFrameEventCompletion() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanViewport.cpp:296]
0x000000000444795c PSUnrealClient!FVulkanViewport::Present(FVulkanCommandListContext*, FVulkanCmdBuffer*, FVulkanQueue*, FVulkanQueue*, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanViewport.cpp:939]
0×0000000004447098 PSUnrealClient!FVulkanCommandListContext::RHIEndDrawingViewport(FRHIViewport*, bool, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/VulkanRHI/Private/VulkanRHI.cpp:889]
0x000000000450fcd0 PSUnrealClient!FRHICommandListExecutor::ExecuteInner_DoExecute(FRHICommandListBase&) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RHI/Private/RHICommandList.cpp:373]
0x0000000004526d97 PSUnrealClient!FExecuteRHIThreadTask::DoTask(ENamedThreads::Type, TRefCountPtr<FGraphEvent> const&) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RHI/Private/RHICommandList.cpp:428]
0x0000000004526bb5 PSUnrealClient!TGraphTask<FExecuteRHIThreadTask>::ExecuteTask(TArray<FBaseGraphTask*, TSizedDefaultAllocator<32> >&, ENamedThreads::Type) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Public/Async/TaskGraphInterfaces.h:886]
0x0000000002e8b1f6 PSUnrealClient!FNamedTaskThread::ProcessTasksNamedThread(int, bool) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/Async/TaskGraph.cpp:709]
0x0000000002e8ad9e PSUnrealClient!FNamedTaskThread::ProcessTasksUntilQuit(int) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/Async/TaskGraph.cpp:600]
0x0000000004552ab6 PSUnrealClient!FRHIThread::Run() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/RenderCore/Private/RenderingThread.cpp:319]
0x0000000002ee0017 PSUnrealClient!FRunnableThreadPThread::Run() [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/HAL/PThreadRunnableThread.cpp:25]
0x0000000002ec01fc PSUnrealClient!FRunnableThreadPThread::_ThreadProc(void*) [/home/planeshift/UnrealEngine/Engine/Source/Runtime/Core/Private/HAL/PThreadRunnableThread.h:185]
0x00007fab15c94609 libpthread.so.0!UnknownFunction(0×9608)
0x00007fab1529a293 libc.so.6!clone(+0×42)

[2021.07.31-21.33.40:490][840]LogAudioMixer: Display: Audio Buffer Underrun (starvation) detected.
[2021.07.31-21.33.40:490][840]LogExit: Executing StaticShutdownAfterError
Malloc Size=131160 LargeMemoryPoolOffset=196744
Malloc Size=131160 LargeMemoryPoolOffset=327928
Malloc Size=259466 LargeMemoryPoolOffset=587418
Engine crash handling finished; re-raising signal 11 for the default handler. Good bye.
Segmentation fault (core dumped)

Bug Report7445NoCraftingLowUnconfirmedGongerNo free ores / gems17.01.20233 Task Description

In PS Legacy there are low Q ores / gems near mines, which is good for newbies. In PSU there do not seem to be any.
I chose Crafting Category, since you need ores, for example, for crafting weapons.

Bug Report7515NoWeatherLowCould not VerifyTrippedOnReality/EnarelSnow/Rain inside Guild House21.01.20243 Task Description

Snow and rain happen inside guild houses. Lighting also appears be affected by day/night cycles. Not sure if this is related to FS#7424 - guild house: no collision detection inside guild house.

Bug Report7603NoCombatLowNewKiFunStuSThunder clacker03.02.20233 Task Description

Uses ranged sound attack

spams NPC chat tab with Attacks me using normal stance
and
emits A loud thundering noise

Does not actually attack me

Bug Report7625NoModels and MapsLowCould not VerifyKiFunStuSGobo Root in the sky29.01.20233 Task Description

gugrontid 70530.35 -47897.44 10719.28

Bug Report7811NoBugtrackerLowUnconfirmedDamolacharacter stands up from sitting for idle animation07.05.202331 Task Description

I sat Damola down on a char in Kada El. I held “Z” key for that, cause tapping did not work for the char I was aiming at.

Damola sat down. However she stood up every now and then, I think it was for idle animation.

Bug Report7851NoQuestsHighUnconfirmedThosorloss/restart of of completed or in process quest when q...29.10.20233 Task Description

Scenario: You have several in process quests, You go to NPC, look for list of quests. You pick, a quest offered by say Levrus, “more coal”. To you, it sounds like a new quest, so you click on it to see what it is. It then starts you over on that quest from the beginning. You completed and forgot that quest long ago, but it then gets deleted from your completed or in process quest list.

   Unless you check all your completed or in process quests, you are doomed to repeat the entire quest.

If you have many quests done, you may think this is a new quest due to user memory loss, or similar titles of quests. In addition, quest notes are saved locally to a machine, so if you have several machines, or installing new OSs your notes don’t follow.

   As an experienced player, I kept trying to please the guards for a pet for a long time before realizing this situation.
Bug Report7890NoGUILowUnconfirmedStalfosShortcuts only remember 5 commands09.03.20243 Task Description

Any other commands are deleted

Bug Report4574NoEngineLowNewKaerli StronwylleCtrl or Shift modified keystrokes/mouse gestures trigge...11.11.201321 Task Description

1) Ctrl-drag an item or use a shortcut bound to Ctrl-something
2) Note that your run toggle state just changed. :P

Using Ctrl or Shift as a modifier should “lock out” the functions bound to these keys by themselves.

Bug Report4588NoUser InterfaceLowNewTereayMisrepresentation of the character in the Inventory27.07.201022 Task Description

Misrepresentation of the character in the Inventory
All my dwarves (dark haired) are affected
I use a self-compiled client (0.5.4/0.5.5)
The same on Windows (0.5.4)

Bug Report4692NoPetsMediumNewAljuvialleAnders Reggestadcan't move after unmount pet09.04.20132 Task Description

after you'd exhausted to move while riding, and you've unmounted and dismissed your pet, you can't move until client restart.

How to reproduce:
1. mount your pet
2. ride on it while you exhausted to move
3. run shortcut:

/unmount
/pet ID, dismiss

4. you see your physical stamina is full and you can't sit or move anywhere.

PS: if you is not exhausted to move, this bug not occurs.

Bug Report4735NoSettingMediumNewweltallnpc with -01.10.20102 Task Description

The engine code was clearly coded to not allow - so till a different decision is taken these npc are all bugged and should have the - stripped

Brintec Dev-Onni
Vladovic Chel-Astra
Sharven Xant-Areth
Uri Djho-Maat

thanks to Vakachehk for the list

Bug Report4771NoQuestsVery LowAssignedLuzinodrJackInconsistent use of you/ye in Lorytia's Clan quest09.07.20112 Task Description

In the quest Lorytia Starhammer and the Clan reunion Lorytia mostly uses "ye" instead of "you". But the use is not consistent throughout the quest. You'd think that if she regularly says "ye" she'd not switch to "you" for a sentence or two in between, sometimes even switching back and forth within one sentence.

f.e.:
"That is very kind; I thank you. Here is the note: just tell him I sent you."

"Oh, I am sorry, you are still here… do you want to hear what happened?"

"I know ye worked very hard on your piece for the competition and you should have won. I take full responsibility for shortchanging you on the scores."

"He may have some means to get them prepared for you, but ye might make your journey faster if you have them on hand."


There might be more later in the quest, but I'm not done yet.

Bug Report5213NoCharacter CreationMediumNewRalph Campbelldon't hardcode race to set gender in pawscharcreatemain...16.05.20112 Task Description

Index: src/client/gui/pawscharcreatemain.cpp

— src/client/gui/pawscharcreatemain.cpp (revision 7252)
+++ src/client/gui/pawscharcreatemain.cpp (working copy)
@@ -1012,10 +1012,9 @@

   view->Show();
   view->EnableMouseControl(true);


- //temporary hardcoding needs removal
- maleButton→SetEnabled(id != 9);
- femaleButton→SetEnabled(id != 9);
- if(id==9)
+ maleButton→SetEnabled(currentGender != PSCHARACTER_GENDER_NONE);
+ femaleButton→SetEnabled(currentGender != PSCHARACTER_GENDER_NONE);
+ if (currentGender == PSCHARACTER_GENDER_NONE)

   {
       maleButton->SetState(false);
       femaleButton->SetState(false);
Bug Report5242NoCraftingMediumNewnobody specialblade can be removed from hand without disturbing work24.05.20112 Task Description

If you take a heated blade out of your hand while hammering it the work will not be interrupted until the work duration if finished. If you return it to your hand before the work is finished the transformation completes successfully.
THis appears to only work if you replace the item with itself, substituting a different identical item or a completely different item causes an interruption.

Bug Report5331NoEngineMediumUnconfirmedR.GuppyArt glitch sewers19.04.201421 Task Description

Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.

http://imageshack.us/f/16/shot16.jpg/
>Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02

http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02

Bug Report5359NoRendering IssuesMediumNewPhenha PhayethorKlyros colour change13.11.20112 Task Description

I play a Grey Klyros male and after I got my robes I noticed that if I put them on and took them back off, my arms became blue.
This is an easy bug to recreate, all it requires is a grey klyros and a robe.

Bug Report5386NoCombatMediumNewKaerli StronwylleRange of combat messages is FAR too short08.07.20162 Task Description

You can easily shoot with a bow ingame to ranges far beyond the range of combat messages. Mob aggro (and sometimes the archery anim) do not work at such long ranges, either.

Bug Report5421NoNPC DialogLowNewMario RohkrämerKilas Tungse - schizo reply about dungeon22.12.201121 Task Description

Quest: Kilas wants his abacus back

[NPC] Kilas Tungse says: Do you think you can help me with a quick errand?
[NPC] $player says: I love to learn!
[NPC] Kilas Tungse says: Thanks.
[NPC] Kilas Tungse says: I lent my abacus to Crosh Dunehammer, the guardian of the dungeons.

vs.

[NPC] $player says: about dungeon
[NPC] Kilas Tungse says: What dungeon? Are you sure you heard right? If there was a dungeon anywhere nearby, I'm sure the city would've had it sealed off by now.

This "There is no dungeon" conspiracy makes consistent quests hard where inhabitants of the dungeon are involved.

Bug Report5524NoEngineMediumNewGregCouple Of Small problems to be corrected? Knollege Req...12.06.20122 Task Description

I have noticed a few things that are Incorrect, not sure If anyone commented on them, Or If they are In Progress. I will jot them down all in one Report so not to make several reports…

1. The “Cone” On the Energy Arrow Is faced in one direction As in the visual effect right after the energy arrow hits the target (Im sure im not the only one who see’s this wrong?)
2. When Dropping Stacks Of Items Like Pants There is an extra “ES” at the end. Alot Of Items Have The Extra “ES” at the end, that should not be there.

I Had A couple Questions and Requests :)
1. Someway to Turn off the red dropping notifications like.>”You are to far away to attack” and ““**” Has nothing to be looted”. maybe a way to just have it in the system tab.(Asked in help tab, unknown, If someone knows how please tell me lol, thanks!)
2. An NPC Or something In Game That could tell you detailed Information about weapons/quest items and things of that nature, (I have seen the Book in the musium, but I haven’t really studied it yet, and maybe incomplete?)

  It would be really cool if you could go to an npc and hand them what you found, have them give you 2 lines about the sword and what it does. Or even a book from a quest where you can i.d it, have it unidentified untill you take it to an npc and pay them a really small fee to i.d it. (Not complaining at all but I have kept all of my named items I have looted since I have started playing. they are awsome! :D But I want to organize :) please? :D I want to sell them but I dont want to sell something for 10,000 and find out that it was really special. haha with my Inventory im sure I could write the book!

If you want to comment on this aswell, up to you. I will be blunt to the point:
I have seen leather working Implimented But Famiel Is the one and only charature I will have. But He is Forbidden to work with Furs/Hides other then looting for sale. he wants to start making his own armor, so I ask/Hope there is a way to bypass leather armor and make Medium/Heavy Arms/Boots/Gloves when it gets implimented
Thank You For Your Time :)

Bug Report5577NoMap TexturesMediumUnconfirmedTimilTextures Missing in Towns, and Shader Issues16.04.201221 Task Description

Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.

Thank you for your time and attention. ~Timil~

Bug Report5632NoMovementMediumUnconfirmedMario RohkrämerNPC Dialog stops your motion14.05.20122 Task Description

If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.

Probably losely related to PS#5629

Bug Report5782NoCombatMediumUnconfirmedRii Riichanging weapons in battle doesn't work22.10.201222 Task Description

If I have no weapons while in battle and I take out swords, I continue fighting with no weapons. If I stop attacking and then start again, the swords get used.

Bug Report5790NoQuests DynamicsHighNewVenalanQuest menus dissapear to quickly to click on responese.15.10.20142 Task Description

A general problem with the quest menu system at the moment is the speed at menu disappear. The problem occurs in the following situation.

All the following is within one step in the following format.

Player gives NPC 1 item.
Menu: text.
NPC: text.
Menu: No. Menu: Yes.
NPC: text.
NPC: text.
Give 1 Melorick's Scroll Case.
Assign Quest.

You give the npc the item.
The initial npc text appears.
Once they have finished talking the next two menus appear, but before you are able to click on the menus the menus vanish.
This results in you losing the item needed to trigger the quest/step and are unable to repeat it.
This was only became a problem with the introduction of the 'bubble' menu system.

Bug Report5813NoModels and MapsMediumNewRoman YagodinAbacus icon in "Kilas wants his Abacus Back"09.02.201321 Task Description

1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…

2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.

Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:

Now: “When they’re all to the right, I move them all back and move bead in a second line…“
Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“

Bug Report6017NoMiscMediumUnconfirmedThijmenproblem with registering at the forum31.05.202021 Task Description

when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite?
the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).

Bug Report6035NoCraftingMediumAssignedJThompsonJoe LyonCrafting book bugs: Missing recipes, text not greyed09.08.201321 Task Description

I Was going to make some apple jam biscuits recently as requested by Harnquist but I could not for the life of me find them in any of my cookbooks (I have all four!). Since Harnquist asked for it, I was pretty sure I could make it and took a guess that it should be in the Pastry Chef book that has the jam recipe and open biscuits. With that book in Mind, I was able to make the Apple Jam Biscuits, but I never did actually FIND the recipe. I checked with another cook just to make sure, and she couldn’t find it either. She also pointed out that the Bread with Apple Jam is also missing (the other Bread with Duppong/Teveran/Macca/Joopiner Jam and Duppong/Teveran/Macca/Joopiner Jam Biscuits, as well as the Bread with Butter and Buttered Biscuits are also missing.)

In the Making Enchanted Armor book I discovered that the skills you cannot do are not grayed out (AFTER I tried something, was told I didn’t have the skill, and looked more closely at my book! It does say the usual “WIth higher skill you could blah, blah, blah” but it’s the same color as the rest of the text).

Bug Report6144NoEngineMediumNewVenalanTaladNew icons are not showing correctly in MyPlane.02.05.20142 Task Description

I noticed in a characters inventory that “The pastry Chef” book was not displayed as an icon, but was displayed as text “The Pastry Chef”.

It appears that the newest icons have not been loaded or are not reference correctly from MyPlane.

Bug Report6171NoCraftingMediumNewVenalanJoe LyonBug with crafting items being marked as craftable when ...10.10.20132 Task Description

For an example.

In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.

The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.

Bug Report6239NoSoundMediumUnconfirmedErodare LenizusElectrotouch Sound Is Unpleasant03.04.20142 Task Description

Perhaps it's just me, but while Electrotouch is in effect there's a constant grating buzzing sound that just hurts like nails on a chalkboard.

Bug Report6298NoPetsMediumAssignedDavide VescoviniAnders ReggestadSome Pets commands don't work01.01.20142 Task Description

I've just tested some Pet commands (by using a summoned familiar) and the following commands don't seem to reach the familiar NPC:
/pet [name,] assist
/pet [name,] guard
/pet [name,] run
/pet [name,] walk

Please note the Minion behaviour used for pets is using almost the same data in SVN. The steps I used to replicate the bug:
1. summoned a familiar
2. issue a command /pet [name,] follow/stopattack/stay/run/walk
3. use the /info command to know the last perceived command.

When reaching step 3 the info command should show something like that:
(12:08:36) [System] >Last perception: ownercmd:stopattack
instead for the above commands an error message is outputted (just like the command was wrongly typed or isn't recognized).

By using the percept command on the NPC like /percept ownercmd:run the behaviour is correctly run and works as expected.

Also please note that assist/guard commands appear in the help.xml file while the new run/walk don't.

Bug Report6341NoCombatMediumUnconfirmedDan JohnsonDark Rogue Bug28.03.20142 Task Description

When one kills a Dark Rogue in the BD Mine after having it chase one down towards the main corridor they fall to the ground and then float away. Even after catching up with them one is informed that they are too far away to be looted.

The range seems to be when they are out of range to call for help.

Bug Report6373NoModels and MapsLowNewAdamGuild Keys 3D art shows as a pouch bag02.04.20142 Task Description

At the moment the guild key does NOT show up as a key when a character is holding it.
It shows up as a pouch bag.
Please kindly switch the image for a actual gold key just like shown in inventory.

Bug Report6425NoItems CharacteristicsMediumNewMario RohkrämerScale of White Oak Wood model is probably too large04.05.201421 Task Description

With a weight of 9 and a size of 9, the model of “White Oak Wood” appears to be way too large. Such a big heap of wood would weight more than 50 kg. In contrast, the icon is such a tiny poking stick…

www.ligh.deplaneshiftwhiteoakwood.jpg

Bug Report6530NoSpell FormulasMediumUnconfirmedxolaDavide Vescovinitraining repairing07.03.20152 Task Description

for every skill we get practices equal to time we spend while crafting but for repairing it is not true
the practices are equal to time the SECOND attempt repair the same item(so if i repair shield for 403 s i got 310 practices, second time i repaired it 310s )

would be great if we have two alternative way to training repairing: cheap that take longer and faster if we have to spend more cash
there are no bonuses for repairing complex items its only based how bad its damaged it seem

Bug Report6750NoEngineMediumUnconfirmedxolaatacking 05.01.20152 Task Description

when i start atack enemy that is little away and before i see message he is too away switch (with shortcuts /target nearest /atack) to nearest im in combat mode but dont see any system mesages and not doing any hits- it happend in other situacions too but that i know how to reproduce

its worse to aim enemy , i often see ‘you are to away’ in first try and without move next attack hit enemy correctly

Bug Report6855NoGame BalanceMediumNewVenalanDavide VescoviniStacking of damage when holding multiple weapons with b...15.04.20202 Task Description

I tried attacking a kikiri with two ‘Dark Dagger’ and I got the following system messages

(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.

So every attack I do with two Dark Daggers is doing two rounds of extra damage and not just one extra round of damage.

Bug Report6932NoGame BalanceMediumUnconfirmedStalfosBlue Cohosh Root area barely big enough to harvest twic...15.04.20202 Task Description

The are for harvesting Blue Cohosh Root is so small that you need absolute precision to harvest a second time, without “You cannot harvest in the same place twice in a row”.

It’s possible but takes longer to find the right spot, the area needs to be bigger.

Bug Report7079NoBugtrackerMediumUnconfirmedMichael LoevenLocked Chests Deleted When Consumed26.11.20212 Task Description

If the player attempts to open a locked chest by dragging it to their equipment panel. The game displays a message that the chest is locked but consumes the item anyway providing now loot. Expected behavior is that the game places the locked chest back into the players inventory or prevents them from consuming it if it is locked

Bug Report7288NoMovementMediumUnconfirmedSunda KastanPlayer movement differs from Legacy/no 'turn' keybindin...13.09.202121 Task Description

In Legacy PlaneShift, the default movements are:
W = Walk forwards
S = Walk backwards
A = Turn to the left until keypress ends
D = Turn to the right until keypress ends

However in PSU, the movement is as follows:

W = Walk forwards
S = Turn 180 degrees and then walk forwards (towards the camera)
A = Turn 90 degrees left and then walk forwards (at 270 degrees from camera)
D = Turn 90 degrees right and then walk forwards (at 90 degrees from camera)

This is incongruent with legacy movements, but also complicated by the requirement to use the mouse for both UI interaction and movement concurrently.

It may be that this is a result of the absence of a ‘third-person follow’ camera, but behaviour should follow that of legacy.

Showing tasks 51 - 100 of 648 Page 2 of 13 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing