couchgrass seems to be in the wrong place near gugrontid and oja areas, and are unable to be harvested.

https://steamcommunity.com/sharedfiles/filedetails/?id=3240545565

may be due to rendering issues with distro and graphics card. In some cases when using different cards/drivers and compositors such as wayland and xwindows, sometimes render can be slightly off but the current position of the couchgrass seems to be way off.

If you are in a location that has both fishing and harvesting available, if you successfully harvest an item and do not move, but switch to fishing you get a warning saying “You cannot fish in the same place twice” even though you have not fished at this location.

If you successfully catch a fish and do not move, but switch to harvesting you get a warning saying “You cannot harvest in the same place twice” even though you have not harvested at this location.

This is probably true of mining if there are area overlaps, but I have no idea if this actually exists anywhere.

example location for fishing/harvesting: /pos 109482 -757679 20767

The quest Right on the Mine uses a quest item named Hamel Provision and at one point it’s supposed to be given to Gardr. Currently that does not happen. The quest will progress, but the quest item remains stuck in the inventory. It can be placed into storage, but otherwise there’s no way to get rid of it.

Sometimes targeting certain npcs after they’ve died can be trick/frustrating (particularly rogues/cutthroats etc after die animation). It would be nice if you’re in range of a dead npc and you press the “E” key, that it would either open the loot window automatically (instead of opening the dialogue window or doing nothing, depending on npc type) or open the context menu with the loot option (which already exists, it’s just on right click only which is slightly annoying because I frequently lose target on the dead npc when right clicking or navigating to the NPC’s body if I’m farther away).

There are gaps along the road or at the base of buildings at these locations in Amdeneir:

Amdeneir -348976 -595451 18804

Amdeneir -347532 -596049 18814

Amdeneir -346446 -593819 18821

Amdeneir -346293 -592665 18807

Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening.
My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.

A while ago I spent some time fighting some enemies, like ~20 hours worth of it over a week or two, and my armor has never decreased in quality. I think this is awful for the item economy. There is never any need to create new and exciting armors since once you have the set you want, you will never need to replace it. Almost every other item you use decreases in quality. I suppose tools could also be lumped into this as they also never decrease in quality no matter how much I mine, harvest, craft, etc.

While preparing Terevan Berry Wine Saauce (as part of Octarch’s Delight) The “Prepare” button picks either mortar and pestle as the container to be used or the wooden bowl, depending on where my character is standing (in Reffitia’s Kitchen).

Both are too small to hold all items that are needed to combine “Unmixed Terevan Berry Wine Sauce”. Maybe container size should be a criterion more than distance.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

For a while I have been trying and failed ot make Octarch’s delight and Lionfish Souflee.

In both cases the mixing in a wooden bowl didn’t work.

The new crafting interface now shows that there is baking skill required in both cases which doesn’t make sense given the tool set or the recipe book involved
.

The version affected is 0.7.40, unavailable as an option in the FlySpray configuration.

If you have the right amount of raw materials for a crafting process, but they are not in the same stack (for example because you almost used up one stack with other crafting before and you have another full one) the right amount of items gets transferred into the container, but in two separate stacks, the crafting process accordingly fails with the message that there isn’t the right amount of items and ultimately if you don’t notice the message you are wasting the correctly attributed raw material.

The quest option advised by Sharven (”[…] HE has decided […]”) is correctly presented by the interaction menu,

but on selection it is not recognised by Roniston (”[…] You could ask me to tell you about something, perhaps?”)

Quest progression is thereby blocked the Keen Edge chain broken again (after yesterday’s fix of “Slimy Doubt”).

when I run around the world, my max stamina decreases as the same rate as my actual stamina. It really isn’t a crazy issue as everything works normally but when looking at my stamina as it decreases, it seems to be full the entire time until it finally just disappears and I’m suddenly unable to move.

When crafting, the stamina bar works as intended with the max stamina never changing and only my actual stamina decreasing.

when completing a quest with a “choose your reward” section at the end, if you don’t select a reward before clicking “Select a reward” it doesn’t stop you before continuing or give you a default reward, it just completes without giving you any of the possible rewards.

When a friend completed the “Levrus Rat Eyes” quest, she forgot to select a reward before clicking “Select a reward” and received none of the options given.

The item description of a “Shiny Major Gold Diamond Necklace” states that the item has a (base-?) buff of +3 CHR.

It hasn’t when equipped.

Either the description of the buff effects need a fix.

With

- a skill level of 218 (i.e. 186 natively)7
- an unpolished speciment of Q300 to work on

I created a final result for an enchanted gold necklace of Q126

This is an extremly unrealistic random outcome.

in the quest Lori’s Little Delivery you are sent to the plaza to get a number on the fountain, there is nothing on the fountain to inspect to get the number for Lori

after speaking with Sysial you are teleported to the dryken plane instead of the proper location

In some quests there is a delay before you can talk to an NPC again. One example of this is Its Gone Bad. In Legacy the players got a message like “You have to wait for 10 minutes before you can continue this quest.” so that they knew what was going on, but in PSU they don’t get the message.

Admittedly, the message is very OOC, but without it there’s no way for a player to know why they cannot proceed with the quest. If the messages cannot be restored, maybe a line of dialog from an NPC saying that they’ll have more to say later?

After a server crash, if you don’t restart your game, your log will no longer be updated with what happens in game. This has been noticed by Gonger, Migg, and a few others.

The forge at Gardr’s smithy does not offer the usual interaction button when opening the container window. There are simply no buttons.

It has happened to me a dozen times over since joining UR after it has replaced legacy, I relogged inside a guildhouse/law map and I am eternally falling for having spawned slightly beneath floor level.

In several instances I had to wait hours for a /tp back to the map, and so it is happening again today.

Please make a quick fix of this enabling players to teleport themselves back to the map in such a case. It’s a real downer to have to wait for a long time in such a case, particularly given the fact that you probably have to stay online for a GM to /tp and fix this. Huge waste of energy with the constant 3D animation.

This could also be of help if players are trapped in map geometry, inescapable pits, rifts and so on.

The four Onyx Dagger members who share the hall with two Grendols do not respawn once killed.

(16:59:00) [chat] >You cannot cast Fist of the Volcano on Eagle Gobble Hut. You can only cast it on living enemies.

If you can destroy the hut, it should also be possible to apply destructive magic. A living body should be the greater obstacle for magic to overcome when compared to inanimate objects.

I had heard that over a skill threshold, repairing weapons/armour does not reduce maximum quality.
Yet I repaired a weapon with 201 skill (with jewellery) and dropped from max quality of 200 to 199.

Maybe the Jewellery isn’t working properly, as without it, I would be under the threshold I had heard about.

Also Bones attribute was not removed, the whole reason I repaired it at 197/200.

Maybe this is as intended, but if Bones cannot be removed, then getting a Masterwork Bones Platinum Sword from your first and only run through of the Keen Edge quests (currently not completable) is xtremely bad luck after the time it takes to get 100 in sword (even more in UE).

After dropping several valuable items through world geometry without a chance to get it back I’ve got an idea to add a confirmation dialog for drop action.