PlaneShift

The leaver leg armor and appentice robes on Enkidukai clamod isn’t working. this might be the same for all enkidukai’s.

I have a 6950, running the game at absolute max(custom) settings(minus fullscreen, it crashes), and the framerate is ~130fps(see corner, I had limiter on). I think the game has room for some graphics bumps on the “highest” settings. It would also be a good idea to future proof this game. The 6990 is about twice as good as mine or so, and who knows what year 2014 will have in store? At max settings, I think it should run on the fastest graphics card at about ~12-24 fps.

http://img411.imageshack.us/img411/5356/screenshot10dl.png http://img839.imageshack.us/img839/3158/screenshot9rm.png

Now I know some people will be like: “How much did you spend on that computer?” and the answer is: $950.
So yes, normal people could use better graphics. I’m not some crazy uber geek with a $6000 computer(just a normal geek).

Possible additions:
Bump mapping. Cheap way to make things appear more 3d.
Super AA (draw at double resolution, scale down, future proof)
Voxel models/textures.
Another lightmap model: make a second screen, this one is an additive screen, each object reflects light to the second drawing board according to the laws of color (additive, then multiply) so for example, a candle would be yellow on the emitter lightmap, but a chair pitch black. Then after being lit by the candle you preform additive to the chair’s lightmap, and multiply it by the texture of the chair. A third map could be added for reflectivity, but I don’t know if that would be easy since I don’t program graphics.
Better textures.

A book is saved on the local disk with the custom title entered while writing its content. This is very inconvenient if the book has a quite verbose title, then the filename is just as verbose, and if you want to load this text into a copy of this book, you need to type exactly the same book title into the loading filename dialog. Or you need to know where books are located outside the game and rename the saved file there.

I'd like to be able to specify a brief filename to save a book to. The filename dialog may be pre-filled with the suggested filename based on the book title, but I'd like to change it before saving, if desired.

Currently the GUI is one major flaw of Planeshift in my opinion, it makes it look worse than it deserves. A few examples:

• Just try to play the tutorial on a 15 inch laptop (1366×768). As soon as you need to open up the inventory most of the screen is covered, you can’t even close the window because the top right cross is out of screen. I needed multiple tries to find a spot on that window to be able to drag it down and close it finaly.

• We now have channels. But the new basic chat gui hides it by default. New Players with a new installed client don’t see it. A lost chance to show them there are people online actually.

• The possibility to reduce the amount of tabs in the chat window is great but is also a pain in the a.. if every new guildmember needs to be guided through the processs of enabling the guildchat, even a restart is needed. Why not make this tab pop up if someone is in a guild…if the guild joins an alliance make this tab pop up. If not these two are hidden by default?

• Playing this game now for around 5 years I think and at least I have the impression we get with every single release new commands to be used in shortcuts. Thats great, for advanced players…for new ones it is confusing. IMHO its time to take a breath and review them, sort them in order of importance and decide which should be used in the gui and how. Can’t remember how often I heard the question: “How do you mine ores”. A ‘logical’ way could be that you rightclick your character and get it as option (well now there is “introduce yourself”, does it do something?) when the rockpick is equipped, is the fishing rod equipped you fish as option. Also summoning your pet and mount is only possible via commands. The described way could make these also more accessible. (There are also illogical flaws, if mounted you can unmount after rightclick, but you don’t get the mount option when righclick on your mount)

• Think about if some can be combined into one command. We ‘use’ the riveter, anvil etc. Why do we /dig or /fish and not /use the rockpick or fishing rod. I can only think thats a leftover from when we had to /dig iron etc explicit.

Enough for now, hope you guys have enough time to think about it.

it would be nice for bards if they had hats where passers-by could throw some tria in. The hat item would serve as a money container as well as a piece of clothing. The advantages to just throwing tria on the ground are that people can’t just steal the money and it would look nicer.

Client recieves plain text data regarding many things configuration:

<traits><trait id=”10” next=”0” loc=”FACE” mesh=”308” mat=”321” tex=”322” shader=”“/><trait id=”346” next=”0” loc=”HAIR_STYLE” mesh=”328” mat=”0” tex=”0” shader=”0.63,0.32,0.17”/><trait id=”382” next=”0” loc=”HAIR_COLOR” mesh=”0” mat=”0” tex=”0” shader=”0.52,0.45,0.17”/></traits>

It would be better to handle the data this way:
compressed server side
stored compressed
sent compressed
client recieves compressed
client decompresses uses and stores on disk.

compared:
plain text - 1,1k
tar.gz - 0,4-0,5k

to replicate: find a container object somewhere (such as one of the wooden crates near Harnquist’s). Put an item in the crate, and try to unguard it. There doesn’t seem to be any way of doing this, or of unguarding an item before placing it.

Could it be possible to add server version info (and possibly aso recommended/required minimal client version) to the server status page, i.e. to http://planeshift.zeroping.it/index.php?page=about_page for zeroping server? It could help to determine easily whether the update is required/recommended without need to start pslaunch when you don't use it to load the client.

It happens for me always again after “opening” and closing nodes. Sorry, haven’t found a way yet to reproduce it every time. Might add some more information here once I find out more ;)

It dispalys the newly opened node above a previously already opened one.

GMail uses the + to denote email aliases: foo+bar@gmail.com delivers to the same GMail inbox as foo@gmail.com. The PS validation system rejects the + character client side, although it is permitted by the RFCs (see RFC5322 s3.2.3/3.4.1). The easy fix is to be much more liberal on the client about what is allowed in an email address, since we’ll be emailing a validation code to it anyway.

Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.

Thank you for your time and attention. ~Timil~

As the daytime progresses, each few minutes you see the shadows on the floor flashing, especially obvious near the Laanx temple and on the plaza.

It looks like the shadowmap is completely removed, then restored with a tiny delay. Might be necessary to display shadow states of different daytimes?

At least it is a lot less annoying than the repeated switching between several shadowmaps in earlier versions.

The text in speech bubbles is hardly readable. It seems that the black shadow covers the bright colored text.

Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.

Fri May  4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May  4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!

for now I added:

<Sound name="amb-day_forrest_4"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

after:

<Sound name="amb-day_forrest_3"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.

Probably losely related to PS#5629

Grinding Kingsfoil or Wyn Pulp to Paste works in a reasonable time.

But trying the same with Red Mangrove or Sinaflar takes much more time than my Mental Stamina (669) offers. The result is a "Pile of Dust". Did someone move a decimal position?

Request for to list additional Items at the Quest Description.

I would like to have the Items aligned to the related Quests in the Descriptions to get a better Overview and some more Clues in Quests. The descriptions right now are a bit spare, my request is like this

Quest Description
XxxxX ask you for This (to go there).
(Where at some Quests the Place should obviously dont revealed.

But mainly:
Quest Items:
xxxxxx
xxxx
(needed: )
xxxxxxxx
xxyXxx

It’s very easy to miss tells, greetings and etc. For example if I talk with NPC, NPC tab in chat selected. Other char comes and tries to start dialog with me. As I read what NPC says, I miss blinking in the Main tab, so I ignore that char. As for RP, it seems that I’m very impolite because ignoring other chars. Adding popup for messages addressed to me solve this problem and I can immediately(if I want) reply to char.

My suggestion(technical background):

• on each command like <CMD> <TO_PERSON_NAME> generate event with message(tell, greet, etc.)
• this message shows in the main view like other notifications
• this popups can be toggled off in settings

lesser piles of dust (seem to be from emeralds) get assigned a number that is negative. As these are not loot they should not be going through the function that assigns a value. Crafted weapons do not get a value.

Several players of old characters who had a Groffel as pet before the quest wipe, and have to redo the pet quest, are unsatisfied that they don’t get a Groffel again, but a Yulbar instead. See: Status of Our Old Pets

May be that Yulbars didn’t exist at all when they got their pet.

May be that Yulbars are somehow preferred now, or there are just no complaints about Groffels so there is a bias about it.

Would it be possible (without extreme efforts) to ensure that redoing this quest creates the same pet race as before? Or would it be possible in cases of old characters redoing the quest after years that they are allowed to chose the race — for emotional reasons?

Instead of directly opening the book copy text, it would be nice if a book showed a regular info window first. Title, the authors name, and generic book description. If a Read button were provided, that then opened the window with the book copy text, perhaps an event could be generated so there could be read and unread books in ones inventory. Being able to carry and inspect an unread book perhaps gives some interesting quest possibilities.

Any way to get MyPlane running on HTTPS? I am thinking before someone has a problem. Not positive on the category on this one, thanks.

I was just wondering if an in game log viewer could be implemented. I don’t know how to minimize and I have to quit my game every single time I want to check my logs, also it’s useful. And makes so that new players don’t have to go around, wondering how the hell they can solve a quest, when they forgot some crucial information.

If I get a new quest while the quest & event notebook window is open, the quest doesn’t appear in the list until I close and reopen the window. Can getting a new quest cause a refresh of the list of uncompleted quests?

The random weapons naming system is one of the excellent features of PlaneShift, and crystals have always been iconic to PlaneShift. Different varieties of mineral crystals produced at the mine sites. Some descriptors that would indicate quality on the crystals, like: Smoky, cloudy, occulted, clear, milky, flecked, fractured, et cetera. Smoky sapphire, occulted Ruby, et cetera. These could indicate grades of quality. Perhaps there should be a chance to pull extremely unique crystals of magical quality with two or more modifiers. I would not be surprised if this was already thought of, but I wanted to put it up here while it was in my mind.

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

I would enjoy reading a bit of the Greataxe Nyshyn identified. But the scroll is empty.

Nothing major at all, but I cannot change the severity. Is that up to the poster?

Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.

I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :

http://lbalbalba.x90x.net/clang-analyzer/planeshift/

I made a char with a very short name (Min).
Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line
gets highlighted in blue.

Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?

If I have no weapons while in battle and I take out swords, I continue fighting with no weapons. If I stop attacking and then start again, the swords get used.

I think the dungeon is darker at night. I need a torch then. This makes no sense.

This can be fixed with brightness increse / decrease, but still wierd.

Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8

Report data:

51.0737 2.32624 -133.063
0.416704 -0 0.909042
-0.184466 0.979195 0.084559
-0.890129 -0.202923 0.408035
"hydlaa_plaza"
0

It happened to me twice already that I bought a good weapon for tens of thousands of tria, to then find out I need a lot of stats to equip it. And not only can’t I equip it, I don’t know whether it’s worth training for it either because nothing tells me how many more levels I need.

The game shows the effects (damage, speed) and the stats increases/decreases can be looked up in a book in the museum by analyzing the name. Could a way be implemented to know what stats and skills you need to use an item before buying it too? Either as part of identification, as a new separate identification spell for requirements or through some book?

Without that I’m very reluctant to buy anything at all as I spent too much money already on things that are useless to me.

while speaking with an advisor eariler today he had instructed my to come to the bugtracker here, but had made a typo in the link pointing me to “http://www.hydlaaplaza.com/flypray” which I had cought and corrected before coming here. As it stands, I’m very familiar with FlySpray from working on other projects so the typo was trivial for me, but other players might not be so keen. I think an easy way of “fixing” the issue of typos for common resources would be to allow Advisors to have encapsulated snippets containing the links. a few examples would be;

(fs) would be replaced with http://www.hydlaaplaza.com/flyspray

(forums) would be replaced with http://www.planeshift.it/forums.html

(guide) would be point to http://www.planeshift.it/quickstart.html

Etc, Etc..

I don’t know exactly what languages the PlaneShift client/server uses, but if it uses Python this would be a fairly trivial addition.

Hi! As reported in "bug" (bug #5867) spell effects performance is pretty slow on Intel Sandybridge HD 3000 graphics. I understand that this may well be a driver / hardware limitation. Due to the extreme slowness its not easy to roleplay on events when other players cast effects, cause then basically I can not do anything anymore. Except for that the performance is quite nice for onboard gfx, enough for me at least, even at 1680x1050.

Cause of this I would like a way to reduce the quality of *just* the spell effects a bit. I found that I can disable them alltogether by setting shaders to "lowest". But any other settings for shaders doesn´t have any visible effect on performance. Also shaders to "lowest" worsens the other gfx as well.

I also learned I can disable spell effects altogether, by removing the *.eff files from effects directory.

What I would like now is a way to configure spell effects to reduced quality and (hopefully) improved performance. This may also be good for other users of old hardware.

Thanks,
Martin

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

I had discussed this with Sarva who liked the idea and asked me to enter it into the Tracker.

Add a “reason” to the “report” command:
Usage: report [player name] [reason]

In case it takes a while to implement this, meanwhile at least add to the command description that the reporting player also files a petition because this makes it easier for the Game Masters to check what happened.

Thank you for listening (reading),

Gonger

Sometimes I whish to have the ability to store my alchemy sack, or my crafting sack in storage with its content. So I can easily gab it when I want to work on it so naming the sacks (PS#457) would be ideal.

I think, slots in all windows should not have quantity labels displayed then there is only one item.
It concerns inventory window (including equipment slots), a hotbar, container, exchange (could be), etc.

Most quests start with an intro and a confirmation for the player to accept the quest. For those that have skill requirements and/or time locks, instead of hiding the quest completely, perhaps it would be better to expose such quests when the character is otherwise qualified (e.g completed other quests in the chain) and do the skill / time check in the intro steps and have the NPC inform the character that they need to practice more before they can continue, or say something along the lines of "too busy right now, come back tomorrow". This way the player will know the quest is there, and get a hint of what they need to do. Going around and touching all the NPC's and finding nothing just feels like a bug when one knows there should be quests out there someplace.

I've done them…several times, and frankly I'm tired of seeing them offered. Could we have a setting for "Hide Completed Repeatable Quests" that we could enable to stop them form showing up? At least in one case, an NPC has enough repeaters that they show first and new quests are pushed to the 2nd page in NPC Dialog view. If one overlooks the page arrow, one might miss the other offerings.

Filed as Feature Request in Engine > Quest Dynamics…please move it if that's wrong.

So the subject: book titles for crafting techniques are missing in 0.5.9.10 using “elves” skin (and other skins too):

But writable and setting books are ok:

It can be handy to have two separate “Suggest name” buttons for first and last name fields in character creation screen.

It opens an easy way to find a nice combination of first / last name for a new character.

With a plenty of crafted and looted weapons and armor around, there is a need for some basic identification service running by NPC (e.g. Levrus).

To make a ground for an business and relations between real players, NPC identification service should be:

1) expensive
2) less than 100% successful (how about 75%?)
3) limited by item quality / price

/put [amount] item
Into a opened container even when non selected for like sacks that are in your inventory.

/take [amount|all] [stack] [item]
Out of a opened container even when non selected for like sacks that are in your inventory.

/loot [group] [item|all|trias]
Loot a specific item or all items without opening the loot window.

Not all shortcuts from shortcuts window are in "Options→Controls→Shortcuts"
If you set/change a key in shortcuts window the key does not get set/changed in options window until you relog.

The following is not really a bug but more feature request
If you set a key you can set
LShift - RShift
LCtrl - RCtrl
LAlt - RAlt

But if you make key combos it will just turn to
Shift+key
Ctrl+key
Alt+key

Would it be possible to set
LShift+key
LCtrl+key
LAlt+key
RShift+key
RCtrl+key
RAlt+key

That will open up allot more possible key combinations.

Currently, all crafting requires a full setup of equipment (fixed-in-the-world crafting containers) for that craft. This makes sense for some crafting skills such as blacksmithing and to an extent alchemy; however, basic cooking and herbalism (and other crafts TBD) should be possible with only portable crafting containers (such as a campfire and pan or a simple, portable mortar and pestle). This would also require new crafting books: “Campfire Recipes” anyone?

Several times now a sheet of music I have been editing would, after I closed it and reopened it, display only the first line, even when I went back to edit mode, had already saved it, loaded it to a second sheet, and restarted the game.
Needless to say, this is making it impossible to finish writing the piece of music!