Hi,

during my questing in the game, I found a book “The Derghir Menace”, located at Hydlaa’s library, which seems to have broken coding which causes the book’s text to appear together with the incorrect code tags.

See the picture in the link.
//drive.proton.me/urls/BRXAMDATTM#9ENQSvOiXOiu

Thanks!
Bohemia

Talking to Menita and confirming the quest with “I will try” crashes the server.

Kran are too big to enter some places - kra can’t enter Menitas tent or the dark rogue hideout. Double alt to roll through is a workaround but it is still annoying

In Legacy your name is highlighted in red when mentioned in Chat. This is not the case in PSU

After a loss of connection to the server, and logging in the game again without closing the client, the client stops logging chat.

//imgur.com/a/BUTOrjj

On my character Mewshad: 90 AGI, 75 CHA, 154 END, 55 INT, 100 STR, 90 WIL at 13 lvl in Sword. At every attack, I gain 1 point of practice on the training dummy. This means I need to click 200 times to get to the next level. I also tried to do the “special attack” but same there. I think Endurance and Strength is the reason since before I increased these attribute, sword leveling was faster.

just found 4 trees in emerald river. 2 saplings, completely submerged, a slightly larger sapling close to the bank with its head out of the water and a fully grown fir

/pos -283992.16 -421496.05 1608.69 .. large west.

there are other plants close by but the trees are the main items that need to be moved.

In addition to bug FS#7859 there is another scrolling bug.

PSUnreal scrolls down during chat, but on multi line messages it does seem to forget about the last line of the message. It scrolls down towards the second last line of the message.

When using an enchanter my character is digging or lunging.

This should be the same animation as spell casting IMO.

It says the pet has successfully targeted the creature , but will not attack with /pet attack. This is on One-Eyed Rats that can be killed by player, shows the same error on Kikiris mind you, that can’t be killed by player.

A player that is mounted on a Rivnak or Drifter cannot be targeted, for actions such as trade, or even emotes.#

It doesn’t make a difference whether you click player geometry or the mount’s, you always end up selecting the mount over the player.

Even if one could argue for trading that it might be inteded (which I don’t think is overly realistic, since you can hand someone on a mount a loaf of bread), itt would be very strange to greet someone’s pet instead of the owner, when passing on the street, wouldn’t it?

(Selecting high priority since this seriously hampers RP supported with game-mechanics such as emotes)

Working with Stock and Working with Rare Stock books are missing the recipes for heating ingots/stocks in the forge in 0.7.39.

After dropping several valuable items through world geometry without a chance to get it back I’ve got an idea to add a confirmation dialog for drop action.

(16:59:00) [chat] >You cannot cast Fist of the Volcano on Eagle Gobble Hut. You can only cast it on living enemies.

If you can destroy the hut, it should also be possible to apply destructive magic. A living body should be the greater obstacle for magic to overcome when compared to inanimate objects.

The forge at Gardr’s smithy does not offer the usual interaction button when opening the container window. There are simply no buttons.

After a server crash, if you don’t restart your game, your log will no longer be updated with what happens in game. This has been noticed by Gonger, Migg, and a few others.

after speaking with Sysial you are teleported to the dryken plane instead of the proper location

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

Coming soon…

A server crash happened while I was inside the Ash Brotherhood Lair.

On restart the stone in the doorway had been reset in its closed position, and I was effectively trapped inside, without a way of triggering the mechanism to re-open the passageway.

There should be a second trigger/gear/switch on the iside.

The four Onyx Dagger members who share the hall with two Grendols do not respawn once killed.

While preparing Terevan Berry Wine Saauce (as part of Octarch’s Delight) The “Prepare” button picks either mortar and pestle as the container to be used or the wooden bowl, depending on where my character is standing (in Reffitia’s Kitchen).

Both are too small to hold all items that are needed to combine “Unmixed Terevan Berry Wine Sauce”. Maybe container size should be a criterion more than distance.

The quality of items shown during mouse over is one lower then the actual quality shown in info box after right click.

https://media.discordapp.net/attachments/1237535495794331678/1238899389456715866/image.png?ex=6640f678&is=663fa4f8&hm=d7f1b3022cf4c8409a9c985616191c0364b54b2fd2b13e15c8f283659a7f9c5b&=&format=webp&quality=lossless

floating building located here: -335500.28 -590858.44 18368.43

/pos hydlaa_plaza 179911.09 -295941.69 10545.03

From forum thread http://hydlaa.com/smf/index.php?topic=32393.0

In normal duels you can decide whether to kill your opponent or not, leaving him with 1 HP. However, in a guild war this is not the case, in a guild war you can only fight to the death. Make it so that fighters in a guild war have the possibility to spare an opponent. This could be done by creating an option when starting a guild war: lethal war or non-lethal where the fighters can decide to spare an opponent or not.

if an npc synonym occurs in a quest trigger, it'll break that trigger because incoming messages will be replaced by the more_general value while the trigger still expects synonym.
therefore the quest parser should refuse such quests as they're obviously broken or at least throw a warning about such occurrences.

As per this document:

http://planeshift.ezpcusa.com/pswiki/index.php?title=Sound_System#Sounds_in_factories

the creature sounds are not working properly in game today.

The common.xml file is properly read, and the resources are properly loaded, but the only state ID which works consistently is state ID 2: charge.

Idle seems to kick in only after attacks, and anyway not consistently. The others are never launched. The problem is that those events are not properly sent to the client a sound events.

In particular we need the following events: IDLE, CHARGE (when first engages in combat), COMBAT IDLE, ATTACK, (being) HIT, DIE, WALK, RUN.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

When a male nolthrir is mounted on a rivnak his legs stick into the rivnak.

the inscription reads that “Talad may bless the souls” this implies that he also may not. “May Talad bless” or simply “Talad bless” would be a plea for his intercession. “Talad blesses” would be an affirmation to the reader that they are indeed blessed by Talad whether or not it is actually true.

As the title suggests you continue to get the system message you have gained practice when using a skill despite your practice level not actually increasing.

As the title suggests if you add a name like;

Venalan

And you then edit this to say

Venalan “dev”

When you load the client next time around the " will have broken the aliases_name.xml file so none of the added name notes will show. It is because you end up with the following in the xml file

<alias name=”Venalan” alias=”Venalan “Dev”” />

the extra [dev”“] is an unknown component of the <alias /> so breaks the whole formatting of the file.

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

When you equip an item with “BOTH HANDS” flag an icon appears in only the left or right hand inventory slot, whichever you dropped it in.

As the weapon takes up both ‘LEFT’ and ‘RIGHT’ hands it would be clearer if the same icon appeared in both hands to make it clear that both hands are taken up by one item.

It should also be possible to deequip it from the icon in either hand.

We have potions that improve stats, we have potions that improve magic skill, how about potions that improve combat skills and job skills? make alchemists have a little more value :)

I’ve updated the bug to reflect what is happening with the current code, r9606

At the moment the following option will show “red apple (1 of 2) (1/2)” and “red apple (1 of 2) (2/2)” for the menu pair Menu: no. Menu: yes.

…

P:RA.
Menu: bla.
Smith: wana help.
P:RA1. P:RA2.
Menu: no. Menu: yes.
Smith: shame.
Smith: good.
Complete red apple step 4.

It seems there are now duplicate code checks for counting subsets, or duplicate displays of one counting. This option should really show “red apple (1/2)” and “red apple (2/2)”.

Also now, when you have 8 menus visible from many different quests the number shown is (1/8)-(8/7) so it is done on a total number of menus available, not on a by quest basis. For example, if you have 3 quests active and 8 steps the numbering could be (1/3)(2/3)(3/3), (1/2)(2/2), (1/3)(2/3)(3/3)

When you add a filter string to the /study window the empty lines between the item entries is lost such that you end up with long list of items. I think it might look better if the empty lines were maintained when a search string is entered

From Post by apyj13 inhttp://www.hydlaaplaza.com/smf/index.php?topic=41889.msg473672#msg473672 “would it be possible to add a quality “tooltip” on hover so you don’t have to right click on an item when it’s in your inventory to see what quality it is, or perhaps a small number in the corner (similar to what is done with the quantity)?”

Also is it possible to make the numbers for quantity/quality in item slots customisable from skin xmls.

As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.

Potentially related

It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.

I can make this happen by following these steps.

1 - Button height to minimum
2 - button width to manual (and moved to minimum)
3 - button width to auto
4 - set button height to max
5 - button/icon width is fixed and when you change name↔icon you get the broken display

If you don’t follow these steps the width for change between icons and names works correctly

There are many time in quests and KAs when they have the same trigger, for example “about armor” or “about apples”.

When you click a quest menu (or type some text to an NPC) the first dialogue(s) to be searched should be quests and if a matching trigger is found the quest menu should be sent, then if nothing is found in a quest it should search KAs. What is currently happening when you have two or more matching triggers you are getting a random choice between the quest response and the KA response. This results in players getting what seems to be a response from the NPC but the quest does not continue.

As the title suggests all magic items made by crafters need to be identified. As every magically crafted item made the same way ends up giving exactly the same buff, there is logically no need for the crafter to need to identify an item as they will always know what it will do…

In Fishing Lessons for Fish, the quest dialog does not match the quest notes for that particular task. In one possible task the player is told to get 6 eels and 7 manta rays, but the quest notes say 7 eels and 6 manta rays. The player seemed to indicate that it was the notes that were wrong, but isn’t online for me to double-check.

As with other windows with 1600 by 1000 and other similar ratios it does not fit on the screen properly.

If you use:
/setskill me all 100

the server is trying to send all skills multiple times and we get a disconnection on the client

Seems that AdminManager::AwardToTarget() is sending back the WHOLE set of skills instead of the one modified. So the result is 68 skills sent 68 times.

a floating book, that claims to be a dead bird, is floating and inaccessible as it has no collision and thus not allowed to be picked up. position of the book is found by going to /teleport me map hydlaa_plaza 337145.72 -345854.81 10980.61 on teleport you are directly where the book is situated and on a rivnak, a nolthrir has it head high.

Sometimes PSU logs to the wrong logfile, taking my pets name for the logfile instead the name of my character. If I’m not mistaken, the logfile is opened when the first line to log is to be written. If I happen to sit on my pet at the time, the name of my pet is taken instead of the name of my character.