|
Bug Report | 6477 | No | Engine | Medium | Unconfirmed | Gonger | | "/target next" skips over targets | 23.05.2014 | | 2 |
Task Description
During the last Dev Meeting, there was a good discussion about looting problems, especially after killing multiple opponents. Aliasing with “/target next” does not solve the problem, because several players confirmed that this command tends to skip corpses.
Therefore Eredin asked for this ticket as a reminder to check the command.
|
|
Bug Report | 7894 | No | Quests | Medium | Ready to test | Daevaorn | | "Beer Tasting Event" quest cannot be taken up | 09.03.2024 | | |
Task Description
The quest “Beer Tasting Event” (that I understand is the one to start into the Brewing skill) is not working as intended.
OBSERVED: ~~~~~~~~~
When I initiate the quest dialog in the interaction menu with a double click on the option “You brew ales and beers I see, and smell.”
the quest master replies with the generic “Looks like you are in search of fame and honour. Unfortunately I have not tasks to help you in that.”
The quest is not taken up accordingly.
EXPECTED: ~~~~~~~~~
The quest dialogue should be properly initiated and a quest log entry should appear after that.
|
|
Bug Report | 8009 | No | Crafting Transformations | Medium | Unconfirmed | Malunga Leeboo | | "Prepare" button does not appear for an existing combin... | 04.05.2024 | | |
Task Description
Once you creating alchemy components which assume various combinations, like Air Essence (cerating Frost Arangma Essence Mix OR rectifying Mix of corroded Riverling Bones) AND you have a “Riverling” set of ingredients in your inventory, the “Check Prerequisites” button displays “Frost Arangma Essence Mix: Missing 1” and “Prepare” button does not appear. Because it is listed first and no further check is happening. My suggestion is to add checkboxes or radio-buttons to recipes like these in order to help “Check Prerequisites” button detect existing set correctly.
|
|
Bug Report | 2132 | No | Inventory/Items | Low | New | Thom | | /giveitem and /takeitem "all" parameter only works on s... | 13.03.2010 | | |
Task Description
If you have 20 eggs in your inventory, split up in a stack of 19 and 1 separate, /giveitem Test all egg will only give the target 1 egg. You have to stack all eggs together for the command to work.
This also means that if a character has 3 swords stolen via an exploit, and a GM would use /takeitem Cheater all sword, only the stacks would be taken. So if the cheater had 2 swords in a stack and 1 separate, he would keep the separate sword.
|
|
Bug Report | 5778 | No | User Interface | Medium | Unconfirmed | Rii Rii | | /join /leave don't match | 25.09.2012 | | |
Task Description
Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?
|
|
Bug Report | 7844 | No | Bugtracker | Low | Unconfirmed | Damola | | /me in group chat goes to main tab | 20.05.2023 | | |
Task Description
As subject says: /me in group chat goes to main tab. In Crystalspace based PS it went to group tab.
|
|
Bug Report | 6314 | No | Pets | Medium | Assigned | Rigwyn Setson | Ralph Campbell | /pet petname, dismiss is broken | 19.02.2014 | | |
Task Description
the command "/pet Petname, dismiss" stopped working in the last few days.
"/pet $number, dismiss" does not work either.
The following does work:
/target Petname /pet dismiss
|
|
Bug Report | 7932 | No | Crafting | Medium | Unconfirmed | Daevaorn | | /takestackall stacking on item in hand of same quality | 06.11.2023 | | |
Task Description
If you remove one or more items with a given quality X from a container, with the command /takestackall or the respective button while holding another item of quality X in your hand, the stacking occurs in your hand-slot, even while you are working on the item in that slot. Thus work done is being interrupted.
|
|
Bug Report | 6920 | No | Quests | Medium | Unconfirmed | Stalfos | | A Sapling of Xiosia - Does not complete when completing... | 11.03.2022 | | |
Task Description
I’ve completed the child quest that looks for the Boss around Gugrontid, but Sapling of Xiosia hasn’t completed as well.
|
|
Bug Report | 5813 | No | Models and Maps | Medium | New | Roman Yagodin | | Abacus icon in "Kilas wants his Abacus Back" | 09.02.2013 | | 1 |
Task Description
1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…
2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.
Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:
Now: “When they’re all to the right, I move them all back and move bead in a second line…“ Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“
|
|
Bug Report | 6644 | No | User Interface | Medium | Unconfirmed | Evaraj | | Active Effects scrolling | 12.10.2014 | | |
Task Description
Scrolling with the mousewheel does not work if the mousecursor is over one of the listed buffs. It works only if the mousecursor is besides or between the buffs.
svn code r9595
|
|
Bug Report | 6652 | No | Engine | Medium | New | Venalan | Joe Lyon | Active Effects: When button width is "auto" it does not... | 18.10.2014 | | |
Task Description
As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.
Potentially related
It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.
I can make this happen by following these steps.
1 - Button height to minimum 2 - button width to manual (and moved to minimum) 3 - button width to auto 4 - set button height to max 5 - button/icon width is fixed and when you change name↔icon you get the broken display
If you don’t follow these steps the width for change between icons and names works correctly
|
|
Bug Report | 7870 | No | Bugtracker | Medium | Could not Verify | Rykia | | Adding 3 lumps of butter to Preparation Table may cause... | 29.10.2023 | | |
Task Description
Adding 3 lumps of butter to the Preparation Table next to Orchibaly in Oja, seems to cause the server to crash. One and two lumps at a time work as expected.This has happened a few times today, but it may be possible that a DEV is also working on something at the same time.
|
|
Bug Report | 6431 | No | Engine | Medium | New | Venalan | | Adding a " symbol while editing character names in budd... | 06.05.2014 | | |
Task Description
As the title suggests if you add a name like;
Venalan
And you then edit this to say
Venalan “dev”
When you load the client next time around the " will have broken the aliases_name.xml file so none of the added name notes will show. It is because you end up with the following in the xml file
<alias name=”Venalan” alias=”Venalan “Dev”” />
the extra [dev”“] is an unknown component of the <alias /> so breaks the whole formatting of the file.
|
|
Bug Report | 7761 | No | Items Characteristics | Low | Unconfirmed | ferret | | adorned crates in ojaveda continually spawning | 13.02.2023 | | |
Task Description
i have been checking this spawn point for chests for a while. when last update was completed i cleared the adorned crates from the area, which numbered 3 in the stack. today after a check i find another 3 stacked neatly with no offline looking chest suggesting a player moved them. i believe these chests are spawning too high and thus we get a repeat spawning until they appear at the spawn point.
/pos 533371.69 -366812.44 15751.50
|
|
Bug Report | 7124 | No | Items Characteristics | Low | Unconfirmed | Yorlak | | Alchemist fire/freezer not considered weapons | 18.02.2021 | | |
Task Description
with alchemist fire/freezer equipped → attack npc chat responds ‘You have no weapons equipped’
|
|
Bug Report | 7754 | No | Bugtracker | Low | New | Haviland Tenouri | | Alliance chat goes to main | 18.10.2023 | | 1 |
Task Description
Chat for the alliance chat tab goes to the main tab.
|
|
Bug Report | 8011 | No | Graphical Glitch | Very Low | Ready to test | TrippedOnReality/Enarel | | Amdeneir gaps in map | 04.05.2024 | | |
Task Description
There are gaps along the road or at the base of buildings at these locations in Amdeneir:
Amdeneir -348976 -595451 18804
Amdeneir -347532 -596049 18814
Amdeneir -346446 -593819 18821
Amdeneir -346293 -592665 18807
|
|
Bug Report | 7956 | No | Models and Maps | Medium | Unconfirmed | Daevaorn | | Amdeneir needs scaling up by 20-30% | 02.12.2023 | | |
Task Description
It might make sense that an Ynnwn has to crouch in order to get through a Klyros built door, but when Klyros are struggling to pass many doors in their own city, that doesn’t make any sense.
Many doors are too narrow for my Klyros character to pass through. Same holds for some of the decoration, like the kiosks in the market hall with an awning that is too low to look at the wares on the table.
I think 20-30% larger scale would be sufficient to remedy the major trouble spots.
|
|
Bug Report | 5271 | No | Movement | Medium | Unconfirmed | Vakachehk | | Amdeneir Tavern bed's Canopy too low to use | 09.07.2011 | | |
Task Description
The bed’s canopys in Amdeneir tavern are too low for anyone/race to use the beds.
Picture depicting Vakachehk being to tall to get under the bed canopy
You might be able to use them if we could some how have a lying down command and be able to scoot over. Or right click the bed and click ‘Use’ and our character’s automatically lay on the beds. However they’re unusable at the moment.
|
|
Bug Report | 7896 | No | Crafting | Low | Unconfirmed | Daevaorn | | Amdeneir tavern kitchen lacking a (hotspot for a) prepa... | 17.10.2023 | | |
Task Description
While the tavern’s kitchen in Amdeneir has all the smaller pieces of equipment, the tables and stove they are standing on don’t offer any interaction to open an oven, a grill or a preparation table respectively.
I’d expect there to be at least a preparation table accessible.
|
|
Bug Report | 7987 | No | Bugtracker | Low | Unconfirmed | Arireare | | An Eager Claker Quest teleports to dryken plane | 06.01.2024 | | |
Task Description
after speaking with Sysial you are teleported to the dryken plane instead of the proper location
|
|
Bug Report | 7713 | No | Misc | Low | Unconfirmed | TrippedOnReality/Enarel | | AOE spells spam system messages | 02.02.2023 | | |
Task Description
Several area of effect spells (Healing rain, dazzling light, icy ground, tire, probably others) send multiple system messages based on the number of targets affected. For example, with healing rain “You call forth healing rain” is sent 4 times if 4 targets are affected, 8 times if 8 targets are affected.
|
|
Bug Report | 8003 | No | Bugtracker | High | Ready to test | Tutharel | | Armor/tools never decreases in quality no matter how mu... | 12.05.2024 | | |
Task Description
A while ago I spent some time fighting some enemies, like ~20 hours worth of it over a week or two, and my armor has never decreased in quality. I think this is awful for the item economy. There is never any need to create new and exciting armors since once you have the set you want, you will never need to replace it. Almost every other item you use decreases in quality. I suppose tools could also be lumped into this as they also never decrease in quality no matter how much I mine, harvest, craft, etc.
|
|
Bug Report | 6712 | No | Engine | Very Low | Unconfirmed | Hellekin O. Wolf | | ART ERROR: PawsTextureManager wasn't able to load the r... | 20.12.2014 | | |
Task Description
Fri Dec 19 09:55:20 2014, <src/common/paws/pawsimagedrawable.cpp:69 PreparePixmap SEVERE> Fri Dec 19 09:55:20 2014, Could not open image: >Scaling Field Background< Fri Dec 19 09:55:20 2014, Fri Dec 19 09:55:20 2014, ART ERROR: PawsTextureManager wasn’t able to load the requested image: Scaling Field Background
This bug occurs on a fresh install of the Linux 64 bit 0.6.1 client, after update to 0.6.2.
The machine is a Lenovo T430 running Parabola GNU/Linux-libre.
lspci:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
sudo lspci -s 00:02.0 -vvv:
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device 21f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee00018 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915
uname -srvmpio:
Linux 3.17.6-gnu-1 #1 SMP PREEMPT Tue Dec 9 04:18:43 UYST 2014 x86_64 unknown unknown GNU/Linux
|
|
Bug Report | 5331 | No | Engine | Medium | Unconfirmed | R.Guppy | | Art glitch sewers | 19.04.2014 | | 1 |
Task Description
Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.
http://imageshack.us/f/16/shot16.jpg/ >Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02
http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02
|
|
Bug Report | 6750 | No | Engine | Medium | Unconfirmed | xola | | atacking | 05.01.2015 | | |
Task Description
when i start atack enemy that is little away and before i see message he is too away switch (with shortcuts /target nearest /atack) to nearest im in combat mode but dont see any system mesages and not doing any hits- it happend in other situacions too but that i know how to reproduce
its worse to aim enemy , i often see ‘you are to away’ in first try and without move next attack hit enemy correctly
|
|
Bug Report | 8002 | No | Crafting | Medium | Ready to test | Daevaorn | | Auto-prepare picking impossible container | 11.01.2024 | | |
Task Description
While preparing Terevan Berry Wine Saauce (as part of Octarch’s Delight) The “Prepare” button picks either mortar and pestle as the container to be used or the wooden bowl, depending on where my character is standing (in Reffitia’s Kitchen).
Both are too small to hold all items that are needed to combine “Unmixed Terevan Berry Wine Sauce”. Maybe container size should be a criterion more than distance.
|
|
Bug Report | 6376 | No | Models and Maps | Medium | New | nobody special | | awkward wording on ylon dynari plaque | 02.04.2014 | | |
Task Description
the inscription reads that “Talad may bless the souls” this implies that he also may not. “May Talad bless” or simply “Talad bless” would be a plea for his intercession. “Talad blesses” would be an affirmation to the reader that they are indeed blessed by Talad whether or not it is actually true.
|
|
Bug Report | 7842 | No | Bugtracker | Low | Unconfirmed | Gonger | | Bad results for Platinum mining | 10.05.2023 | | |
Task Description
Platinum Mining is pretty much how it was in Legacy - at Mining 200, I succeed less than 40% of the time, and Q is between 80 and 115 only. With optimal mining gear this will not go above Q 130 or Q 140. It was planned to be made in such a way that there is at least a chance to get Q 200 for Platinum. The success % is less disturbing - some things SHOULD be more difficult than others!
|
|
Bug Report | 6903 | No | Items Characteristics | Medium | Unconfirmed | Emaline | Venalan | Banded Mail Armor wrong desc | 09.11.2017 | | |
Task Description
Banded Mail Armor stores in MA category, trains MA but the description reads HeavyArmor under the weight/size/quality. So can we get it changed to read MA please.
|
|
Bug Report | 7787 | No | Models and Maps | Low | Unconfirmed | Baxus | | Barracade Contaners floating | 20.02.2023 | | |
Task Description
There are many containers floating near the Coliseum. POS - hydlaa_plaza 162155.22 -294561.75 10322.76 //drive.google.com/file/d/1XPxOkuBlJ75aoq0OWJ0GnDCj0co0jwrW/view
|
|
Bug Report | 7937 | No | Bugtracker | Low | Unconfirmed | Rykia | | Be able to see several text lines in all chat windows a... | 12.11.2023 | | |
Task Description
Be able to see several text lines in all chat windows after returning from a crash or logging out. This was available in Legacy. Can it also be available in PSU?
|
|
Bug Report | 7324 | No | Characters | Very Low | Unconfirmed | Andrew | | Beard color of Ylian character created in legacy is dif... | 08.02.2022 | | 1 |
Task Description
I could have sworn when I created my Ylian character in legacy it had a dark beard, it shows up with a dark beard in legacy; in unreal the character’s beard shows up as blonde. Seemed peculiar
|
|
Bug Report | 5735 | No | Misc | Medium | Unconfirmed | David | | Bit of grass outside of walls in AkkCentral | 14.08.2012 | | |
Task Description
Nothing major at all, but I cannot change the severity. Is that up to the poster?
Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.
|
|
Bug Report | 6370 | No | Engine | Medium | Unconfirmed | nobody special | | black flame temple spire too low | 24.03.2014 | | |
Task Description
If you fall off the dais where the fire carkerass is and you have max stats you do not die and you cannot return to the temple. To get back you have to commit suicide.
|
|
Bug Report | 5242 | No | Crafting | Medium | New | nobody special | | blade can be removed from hand without disturbing work | 24.05.2011 | | |
Task Description
If you take a heated blade out of your hand while hammering it the work will not be interrupted until the work duration if finished. If you return it to your hand before the work is finished the transformation completes successfully. THis appears to only work if you replace the item with itself, substituting a different identical item or a completely different item causes an interruption.
|
|
Bug Report | 6932 | No | Game Balance | Medium | Unconfirmed | Stalfos | | Blue Cohosh Root area barely big enough to harvest twic... | 15.04.2020 | | |
Task Description
The are for harvesting Blue Cohosh Root is so small that you need absolute precision to harvest a second time, without “You cannot harvest in the same place twice in a row”.
It’s possible but takes longer to find the right spot, the area needs to be bigger.
|
|
Bug Report | 7794 | No | Items Characteristics | Low | Unconfirmed | Bohemia | | Book "The Derghir Menace" - minor code/display issue | 13.03.2023 | | |
Task Description
Hi,
during my questing in the game, I found a book “The Derghir Menace”, located at Hydlaa’s library, which seems to have broken coding which causes the book’s text to appear together with the incorrect code tags.
See the picture in the link. //drive.proton.me/urls/BRXAMDATTM#9ENQSvOiXOiu
Thanks! Bohemia
|
|
Bug Report | 6240 | No | Engine | Medium | Unconfirmed | Roman Yagodin | | Book use commands mess | 21.11.2013 | | 1 |
Task Description
For crafting book /use command equips book in mind slot - and it’s OK, I think. But how to open crafting book for reading, as of RMB click in inventory?
Then dragging a book from inventory to shortcut window, /use command is created. But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty). Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…
After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(
/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” - but this syntax described in a Help window! And /write [slot-name] syntax works as expected.
I think it’s clear that /read command for a books must exist to make complete set. Some use cases:
* want to read any book - use /read [item-name] or /read [slot-name] * want to write to a writable book - use /write [item-name] or /write [slot-name] * want to equip / dequip any book - use /equip and /dequip commands
Sane default results for /use command:
* Crafting book - equip in a mind slot.
It's a reference book, to take a look from time to time in a crafting process, after all.
* Common book and writable book - open book reading window. Using a book in a real world means “read it”.
Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.
|
|
Bug Report | 6529 | No | Characters Animation | Medium | Unconfirmed | Venalan | | Both Hand item attack/equip animation | 16.07.2014 | | 1 |
Task Description
At the moment two handed items appear in a single hand and use the animations for single hand weapons. There needs to be a new set of equip and attack animations for each race for two hand weapons.
|
|
Bug Report | 6528 | No | Inventory/Items | Medium | New | Venalan | Ralph Campbell | Both Hand item flag | 16.07.2014 | | 1 |
Task Description
When you equip an item with “BOTH HANDS” flag an icon appears in only the left or right hand inventory slot, whichever you dropped it in.
As the weapon takes up both ‘LEFT’ and ‘RIGHT’ hands it would be clearer if the same icon appeared in both hands to make it clear that both hands are taken up by one item.
It should also be possible to deequip it from the icon in either hand.
|
|
Bug Report | 6729 | No | Crafting | Medium | Unconfirmed | Shafaragorn | Venalan | Bow making interruptions for nonexistent movement | 11.02.2016 | | 1 |
Task Description
When working on bow making at the Arena smith table: if you /use the table, when the progress bar shows that you are done, instead of being done with whatever you’re doing, you get a message that reads “You interrupted your work when you moved away” without having moved at all.
I’ve repeated it multiple times working on a few different things, but haven’t tried at any other smith tables yet.
|
|
Bug Report | 6776 | No | Items Characteristics | Medium | Unconfirmed | Sajut Fogil | Tuathanach | Bow Prices | 20.01.2015 | | 1 |
Task Description
I crafted two bows, the NPC-Price for the Enkidukai Shortbow (needs lvl 20 in bow making and more material) seems to low. Enkidukai Hunting Bow, Q170; 1588 Tria Enkidukai Shortbow, Q193; 1531 Tria
|
|
Bug Report | 7487 | No | Quests | Low | Could not Verify | Haviland Tenouri | | Broken Quest "Get a Performance" (Roya) | 24.09.2022 | | |
Task Description
After getting the quest from Roya go to Brado and tell him “You might find this useful to you.”. He will not answer (or rather the anwser is empty) and you can not continue the quest.
|
|
Bug Report | 7529 | No | Bugtracker | Low | Unconfirmed | Damola | | Buddies list has hard to read font and text color | 03.11.2022 | | |
Task Description
For some reason the buddies list uses a different font than all the other lists. I find it quite hard to read.
In addition to that the text color is red on a brown-greyish background. That makes it even harder to read.
I suggest using the same font and color as in the other lists.
|
|
Bug Report | 4505 | No | Engine | Medium | New | CXDamian | | buddy command - toggle behavior | 12.06.2010 | | |
Task Description
friends list does not display all friends after using command line without add/remove(onoff), may remove other entries.
starting with no friends:
‘/buddy abcdef’ = ‘abcdef is already on your buddy list’ (refresh friends window, abcdef was added)
‘/buddy abcdefgh’ = ‘abcdefgh is not on your buddy list’ (refresh friends window, abcdef is no longer listed, abcdefgh is not listed)
‘/buddy abcdef add’ = sometimes added, sometimes not
|
|
Bug Report | 6383 | No | Training & Skills | Medium | New | Venalan | | bug with being told you get practice points at level 20... | 05.04.2014 | | |
Task Description
As the title suggests you continue to get the system message you have gained practice when using a skill despite your practice level not actually increasing.
|
|
Bug Report | 6171 | No | Crafting | Medium | New | Venalan | Joe Lyon | Bug with crafting items being marked as craftable when ... | 10.10.2013 | | |
Task Description
For an example.
In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.
The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.
|
|
Bug Report | 6872 | No | Webtools | Medium | Unconfirmed | Emaline | | Calendar Dev meeting Desc typo | 18.01.2017 | | |
Task Description
Just an FYI but the info being posted on the calendar for the dev meetings has a typo. Under Content, second sentence the Word developers is typed Devevelopers.
|