|
Bug Report | 5324 | No | Engine | Medium | Unconfirmed | R.Guppy | | Outside guildhouse door icons missing | 27.07.2011 | | |
Task Description
Both guildhouses Call of Destiny and The Jumping Groffels, show no door icons from outside.
|
|
Bug Report | 5328 | No | Models and Maps | Low | Unconfirmed | Mario Rohkrämer | | Chest model uses an outdated texture | 18.07.2011 | | |
Task Description
The currently used texture “chest.dds” does not match the UV map of the model for the “Chest” item (animated chest, repeatedly opening and closing).
None of the present textures are compatible to this model.
Either create a matching texture, or replace the model by a supported one.
|
|
Bug Report | 5331 | No | Engine | Medium | Unconfirmed | R.Guppy | | Art glitch sewers | 19.04.2014 | | 1 |
Task Description
Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.
http://imageshack.us/f/16/shot16.jpg/ >Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02
http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02
|
|
Bug Report | 5380 | No | Engine | Medium | Unconfirmed | Andrew Draskoy | | Nothing to be looted message grammar | 29.08.2011 | | |
Task Description
The message presented when looting a dead NPC with nothing to loot is “… has nothing to be looted”. While this is valid English, it is more natural to say “… has nothing to loot”.
|
|
Bug Report | 5389 | No | Engine | Medium | Unconfirmed | Kostas Michailidis | | Locked inside. | 25.09.2011 | | |
Task Description
I can only quit the Hydlaa’s Museum when I quit and log in again.The first time I try 90% of everything located inside the museum vanishes.The following message pops up every time I try to quit:You are not in the range to do this.
|
|
Bug Report | 5391 | No | Inventory/Items | Medium | Unconfirmed | Vakachehk | | Trading while over encumbered | 28.09.2011 | | |
Task Description
It’s stupid to not be able to trade (through right clicking the character and clicking ‘trade’) while over encumbered (having to sit down because you’re too heavy). But yet you can just make a shortcut or type /trade and it works.
So my point is, why?
(note: if this task has already been posted and discussed, I did search ‘Trade’ and ‘Trading’)
|
|
Bug Report | 5392 | No | Engine | Medium | Unconfirmed | Alex Matthews | | No armor | 29.09.2011 | | |
Task Description
The leaver leg armor and appentice robes on Enkidukai clamod isn’t working. this might be the same for all enkidukai’s.
|
|
Bug Report | 5535 | No | Engine | Medium | Unconfirmed | Jeremy List | | cannot unguard items in dropped containers | 05.02.2012 | | |
Task Description
to replicate: find a container object somewhere (such as one of the wooden crates near Harnquist’s). Put an item in the crate, and try to unguard it. There doesn’t seem to be any way of doing this, or of unguarding an item before placing it.
|
|
Bug Report | 5566 | No | Engine | Medium | Unconfirmed | Aiwendil | | The treeview of paws is bugged. | 13.04.2012 | | |
Task Description
It happens for me always again after “opening” and closing nodes. Sorry, haven’t found a way yet to reproduce it every time. Might add some more information here once I find out more ;)
It dispalys the newly opened node above a previously already opened one.
|
|
Bug Report | 5574 | No | Engine | Medium | Unconfirmed | Kaerli Stronwylle | | Client-side email validation in registration system rej... | 15.04.2012 | | |
Task Description
GMail uses the + to denote email aliases: foo+bar@gmail.com delivers to the same GMail inbox as foo@gmail.com. The PS validation system rejects the + character client side, although it is permitted by the RFCs (see RFC5322 s3.2.3/3.4.1). The easy fix is to be much more liberal on the client about what is allowed in an email address, since we’ll be emailing a validation code to it anyway.
|
|
Bug Report | 5577 | No | Map Textures | Medium | Unconfirmed | Timil | | Textures Missing in Towns, and Shader Issues | 16.04.2012 | | 1 |
Task Description
Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.
Thank you for your time and attention. ~Timil~
|
|
Bug Report | 5584 | No | Rendering Issues | Low | Unconfirmed | Mario Rohkrämer | | Flashing shadows on the floor | 21.04.2012 | | |
Task Description
As the daytime progresses, each few minutes you see the shadows on the floor flashing, especially obvious near the Laanx temple and on the plaza.
It looks like the shadowmap is completely removed, then restored with a tiny delay. Might be necessary to display shadow states of different daytimes?
At least it is a lot less annoying than the repeated switching between several shadowmaps in earlier versions.
|
|
Bug Report | 5619 | No | Rendering Issues | Medium | Unconfirmed | Mario Rohkrämer | | Text on speech bubbles is covered with black shadow | 02.12.2021 | | |
Task Description
The text in speech bubbles is hardly readable. It seems that the black shadow covers the bright colored text.
|
|
Bug Report | 5625 | No | Engine | Medium | Unconfirmed | Leon | | Reference to non-existent sound file: amb-day_forrest_... | 05.05.2012 | | |
Task Description
Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.
Fri May 4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May 4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!
for now I added:
<Sound name="amb-day_forrest_4" file="/planeshift/art/sounds/amb/day_forrest_3.ogg" />
after:
<Sound name="amb-day_forrest_3" file="/planeshift/art/sounds/amb/day_forrest_3.ogg" />
|
|
Bug Report | 5632 | No | Movement | Medium | Unconfirmed | Mario Rohkrämer | | NPC Dialog stops your motion | 14.05.2012 | | |
Task Description
If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.
Probably losely related to PS#5629
|
|
Bug Report | 5659 | No | Crafting Transformations | Medium | Unconfirmed | Mario Rohkrämer | | Red Mangrove and Sinaflar: Grinding pulp to paste excee... | 30.05.2020 | | |
Task Description
Grinding Kingsfoil or Wyn Pulp to Paste works in a reasonable time.
But trying the same with Red Mangrove or Sinaflar takes much more time than my Mental Stamina (669) offers. The result is a "Pile of Dust". Did someone move a decimal position?
|
|
Bug Report | 5684 | No | Engine | Medium | Unconfirmed | nobody special | | Products of enchantment should not be rated for rarity | 12.07.2012 | | |
Task Description
lesser piles of dust (seem to be from emeralds) get assigned a number that is negative. As these are not loot they should not be going through the function that assigns a value. Crafted weapons do not get a value.
|
|
Bug Report | 5708 | No | User Interface | Medium | Unconfirmed | Trygve Wastvedt | | Quests only appear after reopening the window | 24.07.2012 | | |
Task Description
If I get a new quest while the quest & event notebook window is open, the quest doesn’t appear in the list until I close and reopen the window. Can getting a new quest cause a refresh of the list of uncompleted quests?
|
|
Bug Report | 5716 | No | NPC Dialog | Medium | Unconfirmed | Mario Rohkrämer | | Tokens of Regard - a little senseless since Narwin pass... | 28.07.2012 | | |
Task Description
Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.
|
|
Bug Report | 5719 | No | Items Characteristics | Medium | Unconfirmed | Mario Rohkrämer | | Weapon Identification: Weapon History Scroll descr. is ... | 01.08.2012 | | |
Task Description
I would enjoy reading a bit of the Greataxe Nyshyn identified. But the scroll is empty.
|
|
Bug Report | 5735 | No | Misc | Medium | Unconfirmed | David | | Bit of grass outside of walls in AkkCentral | 14.08.2012 | | |
Task Description
Nothing major at all, but I cannot change the severity. Is that up to the poster?
Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.
|
|
Bug Report | 5760 | No | Build Issues | Medium | Unconfirmed | John Smith | | static src analysis of planeshift | 15.09.2012 | | |
Task Description
I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :
http://lbalbalba.x90x.net/clang-analyzer/planeshift/
|
|
Bug Report | 5767 | No | User Interface | Medium | Unconfirmed | Minks | | Chat highlighting when name is part of another word. | 16.09.2012 | | |
Task Description
I made a char with a very short name (Min). Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line gets highlighted in blue.
|
|
Bug Report | 5778 | No | User Interface | Medium | Unconfirmed | Rii Rii | | /join /leave don't match | 25.09.2012 | | |
Task Description
Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?
|
|
Bug Report | 5782 | No | Combat | Medium | Unconfirmed | Rii Rii | | changing weapons in battle doesn't work | 22.10.2012 | | 2 |
Task Description
If I have no weapons while in battle and I take out swords, I continue fighting with no weapons. If I stop attacking and then start again, the swords get used.
|
|
Bug Report | 5786 | No | Models and Maps | Medium | Unconfirmed | Rii Rii | | Dungeon darker at night | 23.09.2012 | | |
Task Description
I think the dungeon is darker at night. I need a torch then. This makes no sense.
|
|
Bug Report | 5816 | No | Rendering Issues | Medium | Unconfirmed | Roman Yagodin | | Hydlaa lights become wrong after moving between locatio... | 11.08.2014 | | 1 |
Task Description
This can be fixed with brightness increse / decrease, but still wierd.
Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8
Report data:
51.0737 2.32624 -133.063 0.416704 -0 0.909042 -0.184466 0.979195 0.084559 -0.890129 -0.202923 0.408035 "hydlaa_plaza" 0
|
|
Bug Report | 5869 | No | Movement | Medium | Unconfirmed | sk | | Permanently exhausted when dismounting rivnak | 14.01.2013 | | |
Task Description
First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened: I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course. I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.
|
|
Bug Report | 5983 | No | Misc | Medium | Unconfirmed | JThompson | | Music sheets not displaying correctly. | 16.04.2013 | | |
Task Description
Several times now a sheet of music I have been editing would, after I closed it and reopened it, display only the first line, even when I went back to edit mode, had already saved it, loaded it to a second sheet, and restarted the game. Needless to say, this is making it impossible to finish writing the piece of music!
|
|
Bug Report | 5989 | No | Models and Maps | Medium | Unconfirmed | Kaerli Stronwylle | | Map leak in bdoorsin leads to "unleak" and subsequent c... | 03.04.2016 | | |
Task Description
/pos: bdoorsin -180.54 19.71 -864.52
How to reproduce: Run into the area between the large boulder and the cliff face there.
What should happen: Your char should, at worst, have to /unstick out of it, or be respawned due to the map leak.
What does happen:
Your char (sometimes) gets ‘leaked’ off the map and starts to fall through it
As your char falls, they get put back in the normal map area because of the concavity of the cliff face below the path there.
Result: a DR trip, because your character goes “splat” at the bottom of the Bronze Doors canyon.
|
|
Bug Report | 5991 | No | Items Characteristics | Medium | Unconfirmed | Dan Johnson | | guard command bug | 18.05.2013 | | |
Task Description
Over numerous days my character has left items on the Gug altar. After un-guarding them with /guard they are checked and seen not to be guarded by the character anymore. Upon return on a subsequent login they are found to be guarded by the character again. The same items have been un-guarded several times with the same result.
|
|
Bug Report | 6017 | No | Misc | Medium | Unconfirmed | Thijmen | | problem with registering at the forum | 31.05.2020 | | 1 |
Task Description
when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite? the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).
|
|
Bug Report | 6025 | No | Engine | Medium | Unconfirmed | JThompson | | Crafting confusion -erroneous error message | 11.06.2013 | | |
Task Description
I was working on a batch of Liquid Bread Rise and kept getting “You are not sure what to do with this.” I realize this will probably be nearly impossible to reproduce so I’ll try to explain as best I can exactly what I was doing.
I had started by combining the ingredients (1 Foaming Water, 2 Pinches of Salt, 14 Scoops of Lard) on the preparation table, yielding Unmixed Liquid Bread Dough. Then decided to combine them in the wooden bowl so I could go straight to the mixing step. I had already combined 3 when I switched. I added the ingredients to the wooden bowl and combined, letting it automatically do the mixing step, and this worked fine. The I tried to mix the Unmixed Liquid Bread Dough I had previously combined on the table and that is when I got the “You are not sure what to do with this” message. As long as I combined the items in the wooden bowl and then mixed them I had no trouble. If I tried to put in previously combined Unmixed Liquid Bread Dough it gave me the error message. Several times I reflexively hit the Take All and Stack before it was mixed, and when I tried to put it back in the bowl and mix it I got the error message. Eventually I had to stop and measure out more scoops of lard, which required switching my wooden spoon for the scoop, since I was also holding a Dagger of Seduction (and wearing a Merc Helm of Seduction, if that matters). After I switched back, I was able to mix the Unmixed Liquid Bread Dough without any trouble… for awhile. (I didn’t realize right away that was what made it work) Eventually though the problem popped up again (when I prematurely grabbed the mix before it was done, and tried to put it back and finish mixing it, it said “You are not sure what to do with this”) Again, the problem resolved when I switched to measuring lard and back. This happened three times in all. I didn’t put together that it was when I switched tasks that it started working until the third time it happened, so I didn’t have a chance to try just switching tools to see if that was what was fixing it.
|
|
Bug Report | 6100 | No | Movement | Medium | Unconfirmed | Erteky | | Trader NPCs in movement | 10.10.2013 | | |
Task Description
When you trade with and NPC and it is walking, it won’t stop, and you will no longer be able to buy or sell anything from it, since it will be far away from where you started to trade…
|
|
Bug Report | 6148 | No | Engine | Medium | Unconfirmed | Kris Erickson | | Having issues with drifter - unable to name and two in ... | 07.09.2013 | | |
Task Description
(I think the severity is low, but I was unable to change it.)
I have spent days trying to name my drifter with various names. I have confirmed I am using the correct command. /pet name [name] while having the drifter highlighted. I also tried various versions of this… /pet name {name} /pet 1, name [name] /pet 1, name {name} along with many, many different names. They all come back invalid.
Then, after several days of trying, I received the message, “You have no familiar to command.” So, I tried to dismiss my familiar and received the message, “Your pet has already returned to the netherworld.” I was standing there, in game, looking at the glider when I received all these messages. So I tried to summon the pet and another one popped up, so I had two in game at the same time, both named, Aszrai’s Familiar.
If nothing else, please remove the second (or both) familiar from the game. But it would be nice to find a way to name my familiar, but not a priority.
I have an image, which shows them both near the smithy in Hydlaa, but I was unable to figure out how to attach it here. I’m sure one drifter will stick around at the smithy for quite some time.
Thanks for your time and help!
|
|
Bug Report | 6172 | No | User Interface | Medium | Unconfirmed | Rasarat | | Interface>Advanced-Chat>Main chat brackets option broke... | 03.10.2013 | | |
Task Description
This appears to be an option to have lines that appear in Main chat prefaced by origin e.g. [guild], [alliance], etc., provided a user has filtered messages from other chat tabs to appear in Main. However, it seems to work whether or not the option is enabled. Is this a bug or just deliberately no longer an option?
|
|
Bug Report | 6177 | No | User Interface | Medium | Unconfirmed | Rasarat | | Interface>Advanced-Chat>'Auto Tab selection' options br... | 14.10.2013 | | |
Task Description
Regardless of which of the three options is selected, communication seems to switch the active tab automatically to Main if the current tab can't display it. Bug or intentional?
|
|
Bug Report | 6190 | No | Engine | Medium | Unconfirmed | Rezso Gajdoczy | | Removing guilds from alliances (/guildremove) | 14.10.2013 | | |
Task Description
messages.cpp misses another operand?
if(command == “/newguild” || command == “/endguild” || command == “/guildname” || command == “/guildpoints” || command == “/allianceleader”)
{
guildname = words.GetTail(1);
return;
}
|
|
Bug Report | 6191 | No | Engine | Medium | Unconfirmed | Rezso Gajdoczy | | Command - /guildmotd | 14.10.2013 | | |
Task Description
Setting guild MOTD is accidently tied to public notes privilege?
guildmanager.cpp
if ( ! IsLeader(client))
if ( ! CheckClientRights(client, RIGHTS_EDIT_PUBLIC, "You do not have rights to change the message of the day in your guild."))
return;
|
|
Bug Report | 6193 | No | Guilds/Groups | Medium | Unconfirmed | Rasarat | | Commands>Guild commands>/setmemberpermissions | 16.10.2013 | | |
Task Description
My understanding is that /setmemberpermissions [member-name] should allow a user with editing permissions to set/change individual guild member permissions, but the command seems to be broken. A bug or intentional?
|
|
Bug Report | 6217 | No | Misc | Medium | Unconfirmed | Wade Eilrich | | Incorrect grammar on website Story section | 13.11.2013 | | |
Task Description
Drifters Section
“This gas is highly acidic and damages a persons equipped items if they stand in the mist.”
This should be changed to:
This gas is highly acidic and damages a person’s equipped items if they stand in the mist.
Note the apostrophe to indicate a singular possessive noun (person’s).
|
|
Bug Report | 6239 | No | Sound | Medium | Unconfirmed | Erodare Lenizus | | Electrotouch Sound Is Unpleasant | 03.04.2014 | | |
Task Description
Perhaps it's just me, but while Electrotouch is in effect there's a constant grating buzzing sound that just hurts like nails on a chalkboard.
|
|
Bug Report | 6240 | No | Engine | Medium | Unconfirmed | Roman Yagodin | | Book use commands mess | 21.11.2013 | | 1 |
Task Description
For crafting book /use command equips book in mind slot - and it’s OK, I think. But how to open crafting book for reading, as of RMB click in inventory?
Then dragging a book from inventory to shortcut window, /use command is created. But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty). Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…
After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(
/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” - but this syntax described in a Help window! And /write [slot-name] syntax works as expected.
I think it’s clear that /read command for a books must exist to make complete set. Some use cases:
* want to read any book - use /read [item-name] or /read [slot-name] * want to write to a writable book - use /write [item-name] or /write [slot-name] * want to equip / dequip any book - use /equip and /dequip commands
Sane default results for /use command:
* Crafting book - equip in a mind slot.
It's a reference book, to take a look from time to time in a crafting process, after all.
* Common book and writable book - open book reading window. Using a book in a real world means “read it”.
Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.
|
|
Bug Report | 6261 | No | Sound | Medium | Unconfirmed | Jon | | Sound effects based on camera position, not player | 25.11.2013 | | |
Task Description
I've noticed that the sound effects for things like fountains and fires seem to be based on where the camera is located, not where the player is.
To demonstrate, go to 3rd person follow mode and move the camera well back from the character. Position the character near a sound generating item (fireplace in front of temple works). You won't hear it. Move away from the object so that the camera is next to it and you will hear it.
|
|
Bug Report | 6269 | No | Engine | Medium | Unconfirmed | Erodare Lenizus | | Forward Non-Chat Keys To Shortcuts | 29.11.2013 | | 1 |
Task Description
In the current state, if you have focus in the text box of the chat, none of your shortcut hotkeys work, even if they’re mapped to keys that do nothing in the chatbox, such as F1-12, Ctrl, Alt, Tab, Pause, etc.
I’m filing this as a bug report, because either this should be “fixed” so we can map shortcuts to such keys so they will still work while chatting, or the team can decide this is “not a bug” and close it.
The “fix” therefore, is to trap only those keys that chatbox can deal with, and forward anything else to the shortcut processor, so while typing in chat W A S D would be trapped in chat, and F3 would fire the shortcut it’s mapped to.
|
|
Bug Report | 6272 | No | Engine | Medium | Unconfirmed | Noob | | Master's Dark Way Wand Crashes | 12.04.2014 | | 2 |
Task Description
Crashes sometimes occur while unequipping a Master’s Dark Way Wand or mounting while it is equipped.
|
|
Bug Report | 6319 | No | Movement | Medium | Unconfirmed | Kaerli Stronwylle | | Player character in two different positions at the same... | 04.01.2014 | | |
Task Description
The screenshots pretty much tell the whole story.
1) Have char A (Primatus for me) enter the GH and sit on some furniture. 2) Have char B (Sabor) log into the GH.
A on A’s client is atop the furniture, while on B’s client A is in the furniture. Probably a symptom of the known issues with object spawning in PS, but still….really guys?
|
|
Bug Report | 6323 | No | Magic System | Medium | Unconfirmed | Daevaorn | | Mounted shape-shifting results in wrong speed | 13.01.2014 | | 1 |
Task Description
When you use a shape-shifting spell like Gorwealform (assuming the same holds for Polymorph) while mounted, the speed is not set correctly and you can reach no more than walking speed afterwards.
|
|
Bug Report | 6332 | No | Client start-up | Medium | Unconfirmed | Rigwyn Setson | | Crash starting client | 14.05.2014 | | |
Task Description
This is kind of stupid, but I noticed that if you run pslaunch, then click on “Play” before the client version and launcher version is displayed, the client will crash. It might not hurt to lock the play button until the launcher is fully initialized. Its a small bug, but probably quite easy to fix.
|
|
Bug Report | 6338 | No | Inventory/Items | Medium | Unconfirmed | Mario Rohkrämer | | Quest NPC took armor from my hands | 09.02.2014 | | |
Task Description
(Merrinez’ Bad Mood)
When I carelessly executed the reply “Thses might help your hands.” (typo fix is probably already pending server update), the gloves my character wears disappeared from his hands, and Merrinez received them. I thought worn armor is not considered to be taken in quests?
|