PlaneShift

There is tiny unreadable text in the Main tab of the chat, if you have font size 0 for Chat Text. Any chat that comes after it is fine, and it becomes readable if you change Chat Text Size, even if you change it back to 0 again.

It is the “<Player> just joined PlaneShift” text

In the old version, there was a small inventory without the character part. It could be useful for trading etc.

These 2 values for experience should be merged for a less verbose log.

Similar but not identical to FS#7871

Four trees growing in the center of the riverbed at /pos
raurim_area 632871.68 -471483.83 9353.26

Although not impossible to have them grow in the water, it’s highly unlikely they’d grow at the center of the stream.

When using an enchanter my character is digging or lunging.

This should be the same animation as spell casting IMO.

Also says in Main chat “Guild Member just joined Planeshift” yet has a No under Online.

You may pick Energy Glyph or Energy Glyph. And it should be Levrus’ Rat Eyes

There’s a minor map glitch in Jayose library.
On the ground floor there’s a patch of grass blades floating between the shelves in mid air.

Death animations play inconsistently for several NPCs. ex. Rogues in Oja and Cutthroats on Ojaroad, forest aragama on the road between the magic shop and Hydlaa.

Sometimes the animations will play, but most of the time they do not.

The fishing animation for the female stonehammer reels in the rod with the right hand, but the reel on the rod is for reeling with the left hand. This may affect other character models as well.

Certainly happens with Sapphires, making q300 Enchanted Sapphires gives no practice in a way.

There are gaps along the road or at the base of buildings at these locations in Amdeneir:

Amdeneir -348976 -595451 18804

Amdeneir -347532 -596049 18814

Amdeneir -346446 -593819 18821

Amdeneir -346293 -592665 18807

If you are in a location that has both fishing and harvesting available, if you successfully harvest an item and do not move, but switch to fishing you get a warning saying “You cannot fish in the same place twice” even though you have not fished at this location.

If you successfully catch a fish and do not move, but switch to harvesting you get a warning saying “You cannot harvest in the same place twice” even though you have not harvested at this location.

This is probably true of mining if there are area overlaps, but I have no idea if this actually exists anywhere.

example location for fishing/harvesting: /pos 109482 -757679 20767

Talking to Menita and confirming the quest with “I will try” crashes the server.

When I learned about the new transformation mode I took it upon myself to clean up our guildhouse.

In the process I removed many old items from the map and stored them in containers instead.

While I did this occasional crashes happened, which on returning seem to have deleted items stored in these containers.
I have lost roughly 70% of player generated/crafted items, some of historical value this way, as well as many player crafted weapons and armours of highest quality.

A very alarming issue.

If my asumption is correct the server automatically deletes any item that it suspects to be involved in crashes. While this maybe desired behaviour in terms of the technical side of things, in terms of a persistent game world this is REALLY, REALLY bad, if true.

When an npc talks the volume of the music ect makes it hard to hear them. Lets try setting all volume to 20% or so and see how that effects it.

It has happened to me a dozen times over since joining UR after it has replaced legacy, I relogged inside a guildhouse/law map and I am eternally falling for having spawned slightly beneath floor level.

In several instances I had to wait hours for a /tp back to the map, and so it is happening again today.

Please make a quick fix of this enabling players to teleport themselves back to the map in such a case. It’s a real downer to have to wait for a long time in such a case, particularly given the fact that you probably have to stay online for a GM to /tp and fix this. Huge waste of energy with the constant 3D animation.

This could also be of help if players are trapped in map geometry, inescapable pits, rifts and so on.

Coming soon…

While sacks and other containers are good for bulk storage, they have the significant drawback of making the inventory harder to navigate, and sorting as well, especially since one can always only have exactly one container window open.

To fix this, one might consider the following ideas:

1) allow any number of container windows to be open, so one can simply put stuff from one container into another, instead of having to put it into the main inventory first.

2) instead, make the container window, once opened, refresh by what container you click on, instead of having to go the rightclick-select-open route

3) instead, make any containers append to the main inventory slot space, but replace the first slot with an image of the container, and clearly separate the appended areas from each other and from the main inventory space by a diferent frame style (could be different for each container type), or at least some additional space. Also, slot spaces that are not provided by a container should remain blank so that a container always starts at the first (second) slot of a fresh line.

When selecting a container, the appropriate window / slot area frame should flash or something so that one sees which container has which window.

4) Let container windows be resizable, and possibly more compact by default.

Mounts

After executing a dismount, I end up underneath (and partially inside of) the mount rather than beside it.

the server send DR updates to all group members even if the actor causing it is not in range and therefore the target client doesn’t have an actor associated with it.
this results in a “Stat request failed because CelClient not ready for EID:xxxxx” for each movement of the group member that is out of range.

In order for the custom channels to be useful, they need a convenient interface. The need for typing /x before stuff isn’t terribly annoying, but also not terribly convenient. However, the biggest issue is that with multiple such channels, all talk gets mangled into one. The designation for the originating channel doesn’t help much in that case.

Therefore it would be nice to be able to create and assign custom tabs to channels, which would then function just like any of the built-in tabs. It would be even nicer if that arrangement could be stored, which would go very well with the auto-joining of custom channels proposed elsewhere.

How to reproduce:
do something which require much physical stamina: move many stuff in your bag, do something at anvil or something another.
and then run following commands:
/sit
/unmount
/target <PET NAME>
/mount ←– here your physical stamina will be full!!!
/stand

seeing that furnature is one of the heavest item types in the game, redecorating guild halls can become tedious and god forbid things get cluttered it is not possible to eaisly move them to storage. my request is that typing /storage will work inside a guild hall as if you were targeting a storage npc. just for convienance sake.

When I try to select a grill in Brado’s tavern the pink rotating cross does not appear.
Right click works and brings up the action icons. However, putting meat in one of the slots and “use” the grill to grill the meat results in “You interrupted your work when you moved away” every time. Other items like preparation tables, pots, etc. work fine.

I’m running PS on:
Arch linux ( up to date system ) 86×64 intel core i5
mobility radeon HD5xxx series with up to date catalyst drivers.

I logged my console output but I can’t see anything relevant to the problem, could be me so here’s the link:
pastie

I would like it if you could set the default reaction to casting a spell or being attacked. I find it quite annoying to automatically be set to fully defensive when I cast a spell. I also find it annoying that when being attacked by a group of mobs your target focus jumps to whichever one hit you last.

When I cast electrotouch I want to hit my opponent and not change my stance. generally whenever I cast anything in melee I want to keep my previous stance.
When I am in a pile I want to kill what I am fighting before I start on another one. If I want to fight a different one I can so choose manually. It is also annoying that you often jump to a different mob before you are able to loot what you have just killed.

It would be great if there was a section to set these in the options.

In the case of electrotouch I tried to add /attack normal to my shortcut but it was processed and discarded before the spell finished casting. I appreciate you probably don’t want long chains of commands to be processed in turn as it could lead to botting, otherwise I would ask for one command to finish processing before the next is considered. Still it would be nice to repair all my armor with one keypress instead of 5.

I would find it extremely useful if I could select from 1, 5 and 10 amount when shift clicking a stack of raw materials. This would allow me to improve the efficiency of smelting by picking enough material to cast into stocks of the various types. I could then dump a stack of molten ore into the caster and shift click it to spread out the ores into castable portions. obviously the 5 and 10 amounts are for casting stocks from precious and non precious materials.

It would be useful for this to only apply to molten ores in the furnace as there is no need for ingot/stock to be smelted in these particular numbers.
It might be also useful in a forge or other crafting container to have the ability to set to an arbitrary amount when processing ingots or stock for weapon/shield/armor parts.

Perhaps instead of overloading the shift click in this way using the alt click instead would work but this might cause a problem for Apple type computers.

Changed task description to clarify request.

I would like it very much if crafting were to be redesigned more like combat. Instead of one action that takes many seconds to complete and generates only one practice or experience reward make it so that each hammer blow is considered and eligible for a reward. For example at level 10 it takes me about two minutes to turn 12 heated ore into 4 shield handles and I get one practice point and some experience at the end of that time. Under my proposed change it might take just as long but each hammer blow on the ingots would receive a success chance roll that would increment the percentage done. A series of low rolls would result in a failure, either junk metal or very low quality handles and a series of high rolls would result in faster time and/or higher quality handles. This would be analogous to hitting a mob until one of you is dead.

I believe this would be more fair in the long run and if it would seem to make great quality items too available the chance to succeed could be reduced.

I would like to be able to maintain my buddy list a bit better by adding extra info.

I use the list as many to also locate enemies. But the list gets longer and longer so I would like to add additional info to it. Like the guild when met etc.

Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.

http://imageshack.us/f/16/shot16.jpg/
>Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02

http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02

The measurement of note durations is completely wrong. “Beats Per Minute” are no more what they used to be.

Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.

Thank you for your time and attention. ~Timil~

I’m a new user and I just had a very frustrating experience, so I want to propose an improvement.

I requested a guild mate to craft me some chain armor, and when I got it done I picked the Arm piece i was wearing and tried to exchange by the new one. By the gods, the quality-50 armor merged with the quality-300 one and I got two quality-175 armors. Without any confirmation.

I think the merge-on-stack system is fine for many crafting situations, but merging armor stats is a unexpected one. I fail to see why one would want to merge a higher armor with a much lower one. This doesn’t even make sense: if you mix water and herbs it’s ok that you get an infusion, but you can’t mix a chain mail with another one to instantly get two different ones.

I requested a GM to revert the stats and he said that this is the same situation as when one sells or gives away an item by mistake. I think it is not the same thing. This is not a mistake; it is common to exchange items in the inventory to organize or save space, and having these “side-effects” in place can make a simple inventory management a surprisingly bad experience for new users like me. :(

TL;DR:

1. Please review if it really makes sense to merge armors or weapons. I don’t see the use for it, and it sounds illogical, but probably I’m missing something.

2. Please consider adding a confirmation to actions with clearly bad side effects during inventory management, to avoid the frustration, specially for new users.

3. Please consider adding a toggle/checkbox to the inventory to turn on/off automatic item merging (disabled by default to avoid sad surprises like mine).

Thanks for all the hard work, guys. :)

Any way to get MyPlane running on HTTPS? I am thinking before someone has a problem. Not positive on the category on this one, thanks.

The random weapons naming system is one of the excellent features of PlaneShift, and crystals have always been iconic to PlaneShift. Different varieties of mineral crystals produced at the mine sites. Some descriptors that would indicate quality on the crystals, like: Smoky, cloudy, occulted, clear, milky, flecked, fractured, et cetera. Smoky sapphire, occulted Ruby, et cetera. These could indicate grades of quality. Perhaps there should be a chance to pull extremely unique crystals of magical quality with two or more modifiers. I would not be surprised if this was already thought of, but I wanted to put it up here while it was in my mind.

1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…

2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.

Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:

Now: “When they’re all to the right, I move them all back and move bead in a second line…“
Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“

This can be fixed with brightness increse / decrease, but still wierd.

Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8

Report data:

51.0737 2.32624 -133.063
0.416704 -0 0.909042
-0.184466 0.979195 0.084559
-0.890129 -0.202923 0.408035
"hydlaa_plaza"
0

I think, slots in all windows should not have quantity labels displayed then there is only one item.
It concerns inventory window (including equipment slots), a hotbar, container, exchange (could be), etc.

Most quests start with an intro and a confirmation for the player to accept the quest. For those that have skill requirements and/or time locks, instead of hiding the quest completely, perhaps it would be better to expose such quests when the character is otherwise qualified (e.g completed other quests in the chain) and do the skill / time check in the intro steps and have the NPC inform the character that they need to practice more before they can continue, or say something along the lines of "too busy right now, come back tomorrow". This way the player will know the quest is there, and get a hint of what they need to do. Going around and touching all the NPC's and finding nothing just feels like a bug when one knows there should be quests out there someplace.

So the subject: book titles for crafting techniques are missing in 0.5.9.10 using “elves” skin (and other skins too):

But writable and setting books are ok:

Not all shortcuts from shortcuts window are in "Options→Controls→Shortcuts"
If you set/change a key in shortcuts window the key does not get set/changed in options window until you relog.

The following is not really a bug but more feature request
If you set a key you can set
LShift - RShift
LCtrl - RCtrl
LAlt - RAlt

But if you make key combos it will just turn to
Shift+key
Ctrl+key
Alt+key

Would it be possible to set
LShift+key
LCtrl+key
LAlt+key
RShift+key
RCtrl+key
RAlt+key

That will open up allot more possible key combinations.

It would be helpful if measures were numbered.
It would be extremely helpful for writing music to be able to just play the last measures added. It would be useful for RP purposes, too, since that is how one often practices a piece… working on one section at a time, or you might want to share part of something you had written.

when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite?
the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).

I Was going to make some apple jam biscuits recently as requested by Harnquist but I could not for the life of me find them in any of my cookbooks (I have all four!). Since Harnquist asked for it, I was pretty sure I could make it and took a guess that it should be in the Pastry Chef book that has the jam recipe and open biscuits. With that book in Mind, I was able to make the Apple Jam Biscuits, but I never did actually FIND the recipe. I checked with another cook just to make sure, and she couldn’t find it either. She also pointed out that the Bread with Apple Jam is also missing (the other Bread with Duppong/Teveran/Macca/Joopiner Jam and Duppong/Teveran/Macca/Joopiner Jam Biscuits, as well as the Bread with Butter and Buttered Biscuits are also missing.)

In the Making Enchanted Armor book I discovered that the skills you cannot do are not grayed out (AFTER I tried something, was told I didn’t have the skill, and looked more closely at my book! It does say the usual “WIth higher skill you could blah, blah, blah” but it’s the same color as the rest of the text).

GET RID OF KEYS and replace it with a keypad code when door is clicked.

Player who has been given keypad privileges after being accepted to guild now can simply CLICK DOOR and enter a password.

IF password is correct, THEN the player magically gets teleported inside.

IF Guild Leader feels any guild member is exploiting their access powers and making a mess inside (like stealing), THEN access is revoked in the GUILD MEMBER screen by right clicking player name and option called REVOKE KEYPAD USE. Only Guild Leader and PERMISSIONS for specific Member Levels can change this back and forth.

PROBLEM SOLVED.

For crafting book /use command equips book in mind slot - and it’s OK, I think.
But how to open crafting book for reading, as of RMB click in inventory?

Then dragging a book from inventory to shortcut window, /use command is created.
But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty).
Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…

After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(

/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” -
but this syntax described in a Help window! And /write [slot-name] syntax works as expected.

I think it’s clear that /read command for a books must exist to make complete set. Some use cases:

* want to read any book - use /read [item-name] or /read [slot-name]
* want to write to a writable book - use /write [item-name] or /write [slot-name]
* want to equip / dequip any book - use /equip and /dequip commands

Sane default results for /use command:

* Crafting book - equip in a mind slot.

It's a reference book, to take a look from time to time in a crafting process, after all.

* Common book and writable book - open book reading window. Using a book in a real world means “read it”.

Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.

I hope it is technically possible to programmatically request a further execution of the launcher as administrator to be able to exchange binaries in UAC protected directories (%ProgramFiles% or %ProgramFiles(x86)% under Windows Vista/7/8…); and may it just be by the launcher calling itself as a new instance executed under the Administrator account.

Other platforms than Windows may require a similar solution.

When you try to kill some kind of MOBs, usually humanoids, with the ability to heal themselves, they keep resurrecting.
You can easily see this in Camp Banished. When the foe reachs a health threshold it starts casting healing flash several times. It seems that there is a sort of queue filled with the spells, and the foe keeps resurrecting until you kill him in a moment he is not casting the healing spell.
This is the opposite of the previous behaviour where the opponent was just dying several times.

In the current state, if you have focus in the text box of the chat, none of your shortcut hotkeys work, even if they’re mapped to keys that do nothing in the chatbox, such as F1-12, Ctrl, Alt, Tab, Pause, etc.

I’m filing this as a bug report, because either this should be “fixed” so we can map shortcuts to such keys so they will still work while chatting, or the team can decide this is “not a bug” and close it.

The “fix” therefore, is to trap only those keys that chatbox can deal with, and forward anything else to the shortcut processor, so while typing in chat W A S D would be trapped in chat, and F3 would fire the shortcut it’s mapped to.

A UI improvement: This would make things much more convenient for spells like Dweomer Detection, but generally in cases where an action is performed on an object such as repairing weapons and armor. It would be great if the object of the action was (first choice) an external object that you have in focus. If there is no such object, use the one in the sword hand.

Right now, there is a mix of both of these things implemented. This would make it consistent and convenient. Right now it's quite awkward to have to drop an item, and then focus on it before casting a spell on it.