PlaneShift

I would like it if you could set the default reaction to casting a spell or being attacked. I find it quite annoying to automatically be set to fully defensive when I cast a spell. I also find it annoying that when being attacked by a group of mobs your target focus jumps to whichever one hit you last.

When I cast electrotouch I want to hit my opponent and not change my stance. generally whenever I cast anything in melee I want to keep my previous stance.
When I am in a pile I want to kill what I am fighting before I start on another one. If I want to fight a different one I can so choose manually. It is also annoying that you often jump to a different mob before you are able to loot what you have just killed.

It would be great if there was a section to set these in the options.

In the case of electrotouch I tried to add /attack normal to my shortcut but it was processed and discarded before the spell finished casting. I appreciate you probably don’t want long chains of commands to be processed in turn as it could lead to botting, otherwise I would ask for one command to finish processing before the next is considered. Still it would be nice to repair all my armor with one keypress instead of 5.

I would find it extremely useful if I could select from 1, 5 and 10 amount when shift clicking a stack of raw materials. This would allow me to improve the efficiency of smelting by picking enough material to cast into stocks of the various types. I could then dump a stack of molten ore into the caster and shift click it to spread out the ores into castable portions. obviously the 5 and 10 amounts are for casting stocks from precious and non precious materials.

It would be useful for this to only apply to molten ores in the furnace as there is no need for ingot/stock to be smelted in these particular numbers.
It might be also useful in a forge or other crafting container to have the ability to set to an arbitrary amount when processing ingots or stock for weapon/shield/armor parts.

Perhaps instead of overloading the shift click in this way using the alt click instead would work but this might cause a problem for Apple type computers.

Changed task description to clarify request.

I would like it very much if crafting were to be redesigned more like combat. Instead of one action that takes many seconds to complete and generates only one practice or experience reward make it so that each hammer blow is considered and eligible for a reward. For example at level 10 it takes me about two minutes to turn 12 heated ore into 4 shield handles and I get one practice point and some experience at the end of that time. Under my proposed change it might take just as long but each hammer blow on the ingots would receive a success chance roll that would increment the percentage done. A series of low rolls would result in a failure, either junk metal or very low quality handles and a series of high rolls would result in faster time and/or higher quality handles. This would be analogous to hitting a mob until one of you is dead.

I believe this would be more fair in the long run and if it would seem to make great quality items too available the chance to succeed could be reduced.

I would like to be able to maintain my buddy list a bit better by adding extra info.

I use the list as many to also locate enemies. But the list gets longer and longer so I would like to add additional info to it. Like the guild when met etc.

Hard to spot, but if you go to the location and zoom in and out, and rotate it shows, also as second screenshot shows it also extends to left.

http://imageshack.us/f/16/shot16.jpg/
>Your current position is region: hysewers 11.73 -5.95 -166.09 0 angle: 247 (4.319690), sector : swr-darkgreen02

http://imageshack.us/f/220/shot17.jpg/ (10:19:08) >Your current position is region: hysewers 3.56 -5.70 -162.07 0 angle: 257 (4.491496), sector : swr-darkgreen02

Quest: Kilas wants his abacus back

[NPC] Kilas Tungse says: Do you think you can help me with a quick errand?
[NPC] $player says: I love to learn!
[NPC] Kilas Tungse says: Thanks.
[NPC] Kilas Tungse says: I lent my abacus to Crosh Dunehammer, the guardian of the dungeons.

vs.

[NPC] $player says: about dungeon
[NPC] Kilas Tungse says: What dungeon? Are you sure you heard right? If there was a dungeon anywhere nearby, I'm sure the city would've had it sealed off by now.

This "There is no dungeon" conspiracy makes consistent quests hard where inhabitants of the dungeon are involved.

The measurement of note durations is completely wrong. “Beats Per Minute” are no more what they used to be.

Since the update to 5.9, the textures and shaders when in town seem to be either missing or messed up. The lighting in some areas makes Chars and NPCs look like they’re wearing TV static. I’ve checked the drivers for my graphics card (ATI Radeon 3100 in a Toshiba Satellite Laptop), and they are up to date. Please see the attached screenshots, and if any more info is required, I will be happy to provide.

Thank you for your time and attention. ~Timil~

I’m a new user and I just had a very frustrating experience, so I want to propose an improvement.

I requested a guild mate to craft me some chain armor, and when I got it done I picked the Arm piece i was wearing and tried to exchange by the new one. By the gods, the quality-50 armor merged with the quality-300 one and I got two quality-175 armors. Without any confirmation.

I think the merge-on-stack system is fine for many crafting situations, but merging armor stats is a unexpected one. I fail to see why one would want to merge a higher armor with a much lower one. This doesn’t even make sense: if you mix water and herbs it’s ok that you get an infusion, but you can’t mix a chain mail with another one to instantly get two different ones.

I requested a GM to revert the stats and he said that this is the same situation as when one sells or gives away an item by mistake. I think it is not the same thing. This is not a mistake; it is common to exchange items in the inventory to organize or save space, and having these “side-effects” in place can make a simple inventory management a surprisingly bad experience for new users like me. :(

TL;DR:

1. Please review if it really makes sense to merge armors or weapons. I don’t see the use for it, and it sounds illogical, but probably I’m missing something.

2. Please consider adding a confirmation to actions with clearly bad side effects during inventory management, to avoid the frustration, specially for new users.

3. Please consider adding a toggle/checkbox to the inventory to turn on/off automatic item merging (disabled by default to avoid sad surprises like mine).

Thanks for all the hard work, guys. :)

Any way to get MyPlane running on HTTPS? I am thinking before someone has a problem. Not positive on the category on this one, thanks.

The random weapons naming system is one of the excellent features of PlaneShift, and crystals have always been iconic to PlaneShift. Different varieties of mineral crystals produced at the mine sites. Some descriptors that would indicate quality on the crystals, like: Smoky, cloudy, occulted, clear, milky, flecked, fractured, et cetera. Smoky sapphire, occulted Ruby, et cetera. These could indicate grades of quality. Perhaps there should be a chance to pull extremely unique crystals of magical quality with two or more modifiers. I would not be surprised if this was already thought of, but I wanted to put it up here while it was in my mind.

1) Abacus quest item in “Kilas wants his Abacus Back” looks like some sort of globus…

2) It is not clear from Crosh’s explanations, that numeric base he uses with 7-th beads abacus. It can be both 7 or 8, so right answer may be 64 (base 8) or 49 (if base 7 is used). If base 7 is used, the whole beads line is moved back (left) in same operation with moving its last 7-th bead to the right. Same alhorithm is used in real Russian abacus, which have 10 beads in a line for 10-th base calculations.

Maybe, 2) is not a bug, but it requires some more “out of game” explorations, than player may expect, or just “brute force” enumeration of possible aanswers. So, Crosh’s explanations about his calculations must be more clear:

Now: “When they’re all to the right, I move them all back and move bead in a second line…“
Must be like: “When they’re all to the right, and I need to count one more day, I move them all back and move bead in a second line…“

This can be fixed with brightness increse / decrease, but still wierd.

Ubuntu 12.04 x86_64 on AMD A10-4600M with latest Catalyst 12.8

Report data:

51.0737 2.32624 -133.063
0.416704 -0 0.909042
-0.184466 0.979195 0.084559
-0.890129 -0.202923 0.408035
"hydlaa_plaza"
0

I had discussed this with Sarva who liked the idea and asked me to enter it into the Tracker.

Add a “reason” to the “report” command:
Usage: report [player name] [reason]

In case it takes a while to implement this, meanwhile at least add to the command description that the reporting player also files a petition because this makes it easier for the Game Masters to check what happened.

Thank you for listening (reading),

Gonger

I think, slots in all windows should not have quantity labels displayed then there is only one item.
It concerns inventory window (including equipment slots), a hotbar, container, exchange (could be), etc.

Most quests start with an intro and a confirmation for the player to accept the quest. For those that have skill requirements and/or time locks, instead of hiding the quest completely, perhaps it would be better to expose such quests when the character is otherwise qualified (e.g completed other quests in the chain) and do the skill / time check in the intro steps and have the NPC inform the character that they need to practice more before they can continue, or say something along the lines of "too busy right now, come back tomorrow". This way the player will know the quest is there, and get a hint of what they need to do. Going around and touching all the NPC's and finding nothing just feels like a bug when one knows there should be quests out there someplace.

So the subject: book titles for crafting techniques are missing in 0.5.9.10 using “elves” skin (and other skins too):

But writable and setting books are ok:

Not all shortcuts from shortcuts window are in "Options→Controls→Shortcuts"
If you set/change a key in shortcuts window the key does not get set/changed in options window until you relog.

The following is not really a bug but more feature request
If you set a key you can set
LShift - RShift
LCtrl - RCtrl
LAlt - RAlt

But if you make key combos it will just turn to
Shift+key
Ctrl+key
Alt+key

Would it be possible to set
LShift+key
LCtrl+key
LAlt+key
RShift+key
RCtrl+key
RAlt+key

That will open up allot more possible key combinations.

It would be helpful if measures were numbered.
It would be extremely helpful for writing music to be able to just play the last measures added. It would be useful for RP purposes, too, since that is how one often practices a piece… working on one section at a time, or you might want to share part of something you had written.

when i try to register for the forum the last question is broken: what is the name of the underground version of the stalactite?
the answer should be stalagmite. (so far i tried several typos on both stalagmite and stalactite).

GET RID OF KEYS and replace it with a keypad code when door is clicked.

Player who has been given keypad privileges after being accepted to guild now can simply CLICK DOOR and enter a password.

IF password is correct, THEN the player magically gets teleported inside.

IF Guild Leader feels any guild member is exploiting their access powers and making a mess inside (like stealing), THEN access is revoked in the GUILD MEMBER screen by right clicking player name and option called REVOKE KEYPAD USE. Only Guild Leader and PERMISSIONS for specific Member Levels can change this back and forth.

PROBLEM SOLVED.

For crafting book /use command equips book in mind slot - and it’s OK, I think.
But how to open crafting book for reading, as of RMB click in inventory?

Then dragging a book from inventory to shortcut window, /use command is created.
But /use command for common book just results in a book, equiped in righthand slot (in case it’s empty).
Book isn’t opened for reading nor writing, so where is no result of using it. So no /use…

After equipping a common book in a hand slot, /use [slot-name] command just kills the psclient… This one really unexpected :(

/write [item-name] command syntax not working on a writable book, resulting message is: “You cannot write on this item” -
but this syntax described in a Help window! And /write [slot-name] syntax works as expected.

I think it’s clear that /read command for a books must exist to make complete set. Some use cases:

* want to read any book - use /read [item-name] or /read [slot-name]
* want to write to a writable book - use /write [item-name] or /write [slot-name]
* want to equip / dequip any book - use /equip and /dequip commands

Sane default results for /use command:

* Crafting book - equip in a mind slot.

It's a reference book, to take a look from time to time in a crafting process, after all.

* Common book and writable book - open book reading window. Using a book in a real world means “read it”.

Other "uses" (as a blunt weapon, fuel, press-papier, etc.) are less common.

On Skill window, add a button to drop the selected skill, with a Yes / No confirmation.

This would execute the equivalent of “/setskill me <skill name> 0” (or something close to that) removing all training, practice, rank, etc.

Would do nothing on stats / factions tabs.

This would allow players to remove skills they’re no longer interested in, don’t fit the character they’re developing, deprecated skills, not-yet-implemented skills, or skills acquired from the character generator that the player considers extraneous or unnecessary.

No compensation should be given for the lost ranks, practice, etc. and that should be stated in the confirmation dialog, along with a clear advisory that the action is permanent and irreversible.

Unless we’ve sweet talked a GM into doing it for us, we often have extra skills with a rank of 1 or 2 that we may have inadvertently trained or practiced and they clutter up the list view of skills, as they’re not suppressed by the Filter feature.

In the current state, if you have focus in the text box of the chat, none of your shortcut hotkeys work, even if they’re mapped to keys that do nothing in the chatbox, such as F1-12, Ctrl, Alt, Tab, Pause, etc.

I’m filing this as a bug report, because either this should be “fixed” so we can map shortcuts to such keys so they will still work while chatting, or the team can decide this is “not a bug” and close it.

The “fix” therefore, is to trap only those keys that chatbox can deal with, and forward anything else to the shortcut processor, so while typing in chat W A S D would be trapped in chat, and F3 would fire the shortcut it’s mapped to.

A UI improvement: This would make things much more convenient for spells like Dweomer Detection, but generally in cases where an action is performed on an object such as repairing weapons and armor. It would be great if the object of the action was (first choice) an external object that you have in focus. If there is no such object, use the one in the sword hand.

Right now, there is a mix of both of these things implemented. This would make it consistent and convenient. Right now it's quite awkward to have to drop an item, and then focus on it before casting a spell on it.

When you use a shape-shifting spell like Gorwealform (assuming the same holds for Polymorph) while mounted, the speed is not set correctly and you can reach no more than walking speed afterwards.

The map that shows up when you take a pterosaur flight shows a river identified as the Irifon River between Gugrontid and the Bronze Doors. However, there’s no river there and the Irifon is actually located between Hydlaa and Ojaveda.

After updating itself, and then updating the PS client and data (Win64) to version 0.6.1, the launcher tried a third time, displayed “Using mirror … for updaterinfo.xml | updateservers.xml” — and then, nothing. The button “OK” never appeared.

The button “Cancel” was available. But how shall I know if I interrupt something important if I click it?

With a weight of 9 and a size of 9, the model of “White Oak Wood” appears to be way too large. Such a big heap of wood would weight more than 50 kg. In contrast, the icon is such a tiny poking stick…

Often then I'm trying to speak with NPC using "new" NPC dialog, on activate it shows NPC's reply bubble with a common public phrase (instead of [private] quest choices).

Think that NPC speech bubble should be displayed only for NPC's replies on quest choices / answers. Rule is simple: no quest choices made in dialog session = no need to show NPC reply bubble. All other NPC talk should be directed to the chat.

food for kra shall have new item category -it mess with alchemy preparations while its toxic for others races

At the moment two handed items appear in a single hand and use the animations for single hand weapons. There needs to be a new set of equip and attack animations for each race for two hand weapons.

I would like to see npc’s function as locators for quest characters so that players can “ask around town” if they cannot locate the desired npc.

until now due to the gm’s policy about spoilers and the fact that most NPC’s are pretty much brain dead except for a few very basic responses it is sometimes next to impossible to locate a specific NPC without relying on another player or a wiki website as the information is not available ingame.

essentially I want NPC’s to respond to commands such as “do you know where I can find ‘name’” they should be able to check a database of nearby NPS’s and if they are in range they can point you in the direction or if not in range point you towards an NPC that does.

sample response. “yes i have heard of this ‘name’ you can find him over by “description of location pulled from database”.

sample responce out of range.

“I have not heard that name before perhaps you should try asking ‘NPC near desired character’ in ‘city near desired NPC’

but essentially make NPC’s able to give directions or information about other NPC’s or directions to nearby areas

right now it is nearly impossible to get any information about quests without relying on other players. Npc’s should respond to questions of this nature.

I would like to request that saved quest notes be moved from client side into the book database. currently the quest notes are saved locally and are very vulnerable frequently getting deleted during client repair or re installs. additionally for players who have more than one computer these notes do not properly persist between clients.

considering that players are already allowed to write books and that text data takes up very little space there is really no reason NOT to move this feature server side.

another major issue with the current implementation is that the quest’s description is missing a lot of key information provided by the npc conversation such as names and locations.

a perfect example is the quest Masked Mistress where the description tells you the summary however does not include her brothers name which is given in the npc dialogue.

the lost of quest notes can easily render a quest impossible to complete without asking a person for spoilers or searching through game logs for the missing conversation.

The game possesses many unused book icons that are actually quite interesting but not accessible in any way outside of the shortcut window.

I would like to see a icon selector integrated into the book writing window that allows you to select any book icon for the item’s appearance similar to the way you can assign these icons to a shortcut hot button.

additionally with this implementation there is no longer a need for Jayose to stock a different books for different colors as well as allowing player written books to be more easily distinguished from each other

it would add a fun little cosmetic aspect to role play allowing your ancient tome to look like an ancient tome rather than a hot off the press notebook

Moved from ticket 5981, suggestion by Franta

it would be good to implement command with list of all public channels with something like /list [filter]. It would also show all channels you are joined with the corresponding number.

Example:
/list
gossip (talk with /1 <text>)
auctions (talk with /2 <text>)
hydlaa_chat (not connected)
gobble_hunt (not connected)

the same list with filter as parameter:
/list go
gossip (talk /1 <text>)
gobble_hunt (not connected)

the same list with special case for only connected channels:
/list #
gossip (talk with /1 <text>)
auctions (talk with /2 <text>)

From Post by apyj13 inhttp://www.hydlaaplaza.com/smf/index.php?topic=41889.msg473672#msg473672 “would it be possible to add a quality “tooltip” on hover so you don’t have to right click on an item when it’s in your inventory to see what quality it is, or perhaps a small number in the corner (similar to what is done with the quantity)?”

Also is it possible to make the numbers for quantity/quality in item slots customisable from skin xmls.

Some of the musical notes, when using the Lute and Lira (drum seems okay), have an annoying white noise in the background. The audio is not clean, and this can be bothersome particularly to people with high-end headphones who may be able to hear it better. I am not sure if this is audible to all players, but it certainly should be to anyone with a good pair of headphones.

Some popping sounds can also be heard.

I am not too knowledgeable on music, so I can’t say which notes specifically have unclean sound, but I think since it can be heard plainly it should be easy to find out.

When you are playing a song on an instrument, if you close out of the sheet rather than clicking the stop button, the music will continue to play. This seems to continue until you relog, and opening and using the sheet again doesn’t fix it, it will only make you play two songs at once.

I am not sure if other players hear this or just the player.

In my opinion, X’ing out of the music sheet should work just like the stop button.

When there is foggy weather in the game, some 2D textures will have white boxes around them. The most well-known instance where this happens is with the target effect under an NPC’s feet. I think this also affects 2D grass textures like at the magic shop forest. Basically, the fog makes transparency in certain textures visible by making them white.

I think it would be more realistic and quite useful for looted items to have a random current quality. Finding enough damaged equipment to practice repair is always tough, this idea would go a long way to making it a more usable skill.

This idea, if properly implemented, could also balance out the values of looted items. A sub-routine could be devised to cause the highest value items suffer the greatest pre-loot damage. So a standard unmodified item could have a flat chance of being anywhere from 1 to 50 out of 50 quality. A one modifier item could roll 2 50-sided dice taking the lower result or average, and so on for 2 modifier and three modifier items. Specific implementation could be subject to testing to determine appropriate rates.

This would result in less of a lottery effect.

I would like to have a specific means of muting certain people’s “music”. It’s a shame if you have to turn off all musical instruments to be rid of the “Listen to me practise my same song for any amount of hours if you want to craft here” people.

So it would be very nice if /ignore commands would also affect audio output triggered by the ignored person. Not sure how feasible that is technically, though.

The ability to sort in the storage window is awesome. However, it would also be nice to be able to search your storage for a specific item within a category. I think this would mostly be useful in weapons categories, but I can see it being useful for other categories as well. For example, if I’m looking in category: weapons - axes and I want to find all of my blah blah blah of the hammer axes, it would be nice to be able to filter by “of the hammer”. Sorting is great, but if you’re looking for an item with a specific modifier, and it’s not a prefix, it’s hard to find.

From game chat:

/tell Laanx Hi, Laanx!
> Laanx is not found online.

Current /pray command is a shortcut for /emote pray, but it could be interesting to have separate command to pray gods (or specific god) for miracles or even ask them about something.

“Miracles” should be protective / healing spells, casted on character or group, or offensive spells, casted on enemies.
Spell set could vary by god. Rate of success of appeal & spell power could be determined by character race, faction points, number of previous appeals (in the game day), sacrifices and also (maybe) current location, weather and time of the day.

If god name not specified, any god in the mood could answer to the prayer.
Also, appeling to the more ancient gods (Laanx, Talad) should have lesser rate of success, but greater miracles or revelations.

Any character (even have no magical abilities and choose to be atheist) could use this command.

Gods could be implemented as (invisible) NPCs.

Example command formats:

Pray: /pray [godname]
Ask: /tell [godname] [question]
Sacrifice: /give [godname] [itemname]

Forum thread: http://www.hydlaaplaza.com/smf/index.php?topic=42207.msg477124#msg477124

While the quest system has greatly improved in the years I’ve been gone, there are still things one needs to type to an NPC.

Currently NPCs are still dumb as bricks when it comes to understand what players “write” to them.

As the “writing” is supposed to be “speaking” one would assume that an a person would understand a word even if it’s spelled incorrectly.

For example - in a certain quest you have to tell a certain NPC the words “diamond and opal”.

If you spell the words wrong (e.g. opale) the npc refuses to help and you have no chance of repeating that step and thus are forced to finish the quest in another way.

With regexp in the engine the settings department could make the answer look like this: (?i).*diamond.*opal.*

This would match case insensitive on “it are diamonds and opals” as well as “diamondsopals” or “diamond opale” as well as many other possible phrases that include the words “diamond” and “opal”.

With wordlists settings could define a couple of spellings of certain words to match on in-word typos even. for example: (?i).*$quest_stepX_wordlist1.*$quest_stepX_wordlist2.*
In the wordlist the settings dept could then, for example, define spellings like diamond, daimond, diamant and the like. That’s just an example though, I’m sure there are many more examples in game currently where a npc refuses to answer or you break a step in a quest only because you cnat type

As for the regexp, the PCRE library from Apache could be used, maybe. http://www.pcre.org/

Log in with main char.
create shortcut
log out
log in with another char.
shortcut created with main character shows on all alternates.

Log in with separate account
shortcuts from main account are also transferred to here

In Legacy PlaneShift, the default movements are:
W = Walk forwards
S = Walk backwards
A = Turn to the left until keypress ends
D = Turn to the right until keypress ends

However in PSU, the movement is as follows:

W = Walk forwards
S = Turn 180 degrees and then walk forwards (towards the camera)
A = Turn 90 degrees left and then walk forwards (at 270 degrees from camera)
D = Turn 90 degrees right and then walk forwards (at 90 degrees from camera)

This is incongruent with legacy movements, but also complicated by the requirement to use the mouse for both UI interaction and movement concurrently.

It may be that this is a result of the absence of a ‘third-person follow’ camera, but behaviour should follow that of legacy.

I could have sworn when I created my Ylian character in legacy it had a dark beard, it shows up with a dark beard in legacy; in unreal the character’s beard shows up as blonde. Seemed peculiar

The list of guild members is not sortable by online status.

Expected result:

Sort them by a different field by clicking one of the columns.

Every time I unmount and mount again it adds another about 90 degrees so that after four times the char sits on the mount in almost correct orientation again.

Tested on Rivnak and Drifter.

However after dismissing a pet and summoning it again once after logging in, the sitting position keeps locked. But only if the character mounted it once before dismissing the pet for the first time.

So or so there is something off with the sitting position of the char on a mount after the first unmount and mount again cycle.

# Expected result

Character always sits on the mount in correct orientation.