It would be helpful if measures were numbered.
It would be extremely helpful for writing music to be able to just play the last measures added. It would be useful for RP purposes, too, since that is how one often practices a piece… working on one section at a time, or you might want to share part of something you had written.

Since you can set the sharps and flats for the overall piece of music, you should be able to insert naturals. Otherwise, if you need to cancel one of the sharps/flats for the key you are using anywhere in the music, your only alternative is to write in all the sharps and flats throughout by hand.

Not all shortcuts from shortcuts window are in "Options→Controls→Shortcuts"
If you set/change a key in shortcuts window the key does not get set/changed in options window until you relog.

The following is not really a bug but more feature request
If you set a key you can set
LShift - RShift
LCtrl - RCtrl
LAlt - RAlt

But if you make key combos it will just turn to
Shift+key
Ctrl+key
Alt+key

Would it be possible to set
LShift+key
LCtrl+key
LAlt+key
RShift+key
RCtrl+key
RAlt+key

That will open up allot more possible key combinations.

It can be handy to have two separate “Suggest name” buttons for first and last name fields in character creation screen.

It opens an easy way to find a nice combination of first / last name for a new character.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

I've done them…several times, and frankly I'm tired of seeing them offered. Could we have a setting for "Hide Completed Repeatable Quests" that we could enable to stop them form showing up? At least in one case, an NPC has enough repeaters that they show first and new quests are pushed to the 2nd page in NPC Dialog view. If one overlooks the page arrow, one might miss the other offerings.

Filed as Feature Request in Engine > Quest Dynamics…please move it if that's wrong.

Most quests start with an intro and a confirmation for the player to accept the quest. For those that have skill requirements and/or time locks, instead of hiding the quest completely, perhaps it would be better to expose such quests when the character is otherwise qualified (e.g completed other quests in the chain) and do the skill / time check in the intro steps and have the NPC inform the character that they need to practice more before they can continue, or say something along the lines of "too busy right now, come back tomorrow". This way the player will know the quest is there, and get a hint of what they need to do. Going around and touching all the NPC's and finding nothing just feels like a bug when one knows there should be quests out there someplace.

I think, slots in all windows should not have quantity labels displayed then there is only one item.
It concerns inventory window (including equipment slots), a hotbar, container, exchange (could be), etc.

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

Hi! As reported in "bug" (bug #5867) spell effects performance is pretty slow on Intel Sandybridge HD 3000 graphics. I understand that this may well be a driver / hardware limitation. Due to the extreme slowness its not easy to roleplay on events when other players cast effects, cause then basically I can not do anything anymore. Except for that the performance is quite nice for onboard gfx, enough for me at least, even at 1680x1050.

Cause of this I would like a way to reduce the quality of *just* the spell effects a bit. I found that I can disable them alltogether by setting shaders to "lowest". But any other settings for shaders doesn´t have any visible effect on performance. Also shaders to "lowest" worsens the other gfx as well.

I also learned I can disable spell effects altogether, by removing the *.eff files from effects directory.

What I would like now is a way to configure spell effects to reduced quality and (hopefully) improved performance. This may also be good for other users of old hardware.

Thanks,
Martin

I think the dungeon is darker at night. I need a torch then. This makes no sense.

I made a char with a very short name (Min).
Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line
gets highlighted in blue.

I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :

http://lbalbalba.x90x.net/clang-analyzer/planeshift/

Nothing major at all, but I cannot change the severity. Is that up to the poster?

Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

The random weapons naming system is one of the excellent features of PlaneShift, and crystals have always been iconic to PlaneShift. Different varieties of mineral crystals produced at the mine sites. Some descriptors that would indicate quality on the crystals, like: Smoky, cloudy, occulted, clear, milky, flecked, fractured, et cetera. Smoky sapphire, occulted Ruby, et cetera. These could indicate grades of quality. Perhaps there should be a chance to pull extremely unique crystals of magical quality with two or more modifiers. I would not be surprised if this was already thought of, but I wanted to put it up here while it was in my mind.

Any way to get MyPlane running on HTTPS? I am thinking before someone has a problem. Not positive on the category on this one, thanks.

Instead of directly opening the book copy text, it would be nice if a book showed a regular info window first. Title, the authors name, and generic book description. If a Read button were provided, that then opened the window with the book copy text, perhaps an event could be generated so there could be read and unread books in ones inventory. Being able to carry and inspect an unread book perhaps gives some interesting quest possibilities.

As per this document:

http://planeshift.ezpcusa.com/pswiki/index.php?title=Sound_System#Sounds_in_factories

the creature sounds are not working properly in game today.

The common.xml file is properly read, and the resources are properly loaded, but the only state ID which works consistently is state ID 2: charge.

Idle seems to kick in only after attacks, and anyway not consistently. The others are never launched. The problem is that those events are not properly sent to the client a sound events.

In particular we need the following events: IDLE, CHARGE (when first engages in combat), COMBAT IDLE, ATTACK, (being) HIT, DIE, WALK, RUN.

Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.

Fri May  4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May  4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!

for now I added:

<Sound name="amb-day_forrest_4"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

after:

<Sound name="amb-day_forrest_3"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

As the daytime progresses, each few minutes you see the shadows on the floor flashing, especially obvious near the Laanx temple and on the plaza.

It looks like the shadowmap is completely removed, then restored with a tiny delay. Might be necessary to display shadow states of different daytimes?

At least it is a lot less annoying than the repeated switching between several shadowmaps in earlier versions.

GMail uses the + to denote email aliases: foo+bar@gmail.com delivers to the same GMail inbox as foo@gmail.com. The PS validation system rejects the + character client side, although it is permitted by the RFCs (see RFC5322 s3.2.3/3.4.1). The easy fix is to be much more liberal on the client about what is allowed in an email address, since we’ll be emailing a validation code to it anyway.

It happens for me always again after “opening” and closing nodes. Sorry, haven’t found a way yet to reproduce it every time. Might add some more information here once I find out more ;)

It dispalys the newly opened node above a previously already opened one.

Client recieves plain text data regarding many things configuration:

<traits><trait id=”10” next=”0” loc=”FACE” mesh=”308” mat=”321” tex=”322” shader=”“/><trait id=”346” next=”0” loc=”HAIR_STYLE” mesh=”328” mat=”0” tex=”0” shader=”0.63,0.32,0.17”/><trait id=”382” next=”0” loc=”HAIR_COLOR” mesh=”0” mat=”0” tex=”0” shader=”0.52,0.45,0.17”/></traits>

It would be better to handle the data this way:
compressed server side
stored compressed
sent compressed
client recieves compressed
client decompresses uses and stores on disk.

compared:
plain text - 1,1k
tar.gz - 0,4-0,5k

it would be nice for bards if they had hats where passers-by could throw some tria in. The hat item would serve as a money container as well as a piece of clothing. The advantages to just throwing tria on the ground are that people can’t just steal the money and it would look nicer.

The leaver leg armor and appentice robes on Enkidukai clamod isn’t working. this might be the same for all enkidukai’s.

It’s stupid to not be able to trade (through right clicking the character and clicking ‘trade’) while over encumbered (having to sit down because you’re too heavy). But yet you can just make a shortcut or type /trade and it works.

So my point is, why?

(note: if this task has already been posted and discussed, I did search ‘Trade’ and ‘Trading’)

The message presented when looting a dead NPC with nothing to loot is “… has nothing to be looted”.
While this is valid English, it is more natural to say “… has nothing to loot”.

I must say that this quest is quite disappointing. After a promising and very good beginning the whole story is cut short in an odd way. I think the plot would deserve some development as the beginning is really good.

The currently used texture “chest.dds” does not match the UV map of the model for the “Chest” item (animated chest, repeatedly opening and closing).

None of the present textures are compatible to this model.

Either create a matching texture, or replace the model by a supported one.

In a quest paying a NPC through a dialog box while having no money results in the following message: "<npc> does not need that".
That seems wrong.

if an npc synonym occurs in a quest trigger, it'll break that trigger because incoming messages will be replaced by the more_general value while the trigger still expects synonym.
therefore the quest parser should refuse such quests as they're obviously broken or at least throw a warning about such occurrences.

From forum thread http://hydlaa.com/smf/index.php?topic=32393.0

In normal duels you can decide whether to kill your opponent or not, leaving him with 1 HP. However, in a guild war this is not the case, in a guild war you can only fight to the death. Make it so that fighters in a guild war have the possibility to spare an opponent. This could be done by creating an option when starting a guild war: lethal war or non-lethal where the fighters can decide to spare an opponent or not.

Coming soon…

The Conclave of Glyphs faction does not seem to have been set properly when characters were imported from Legacy. In all characters I’ve checked, the faction is not even shown as discovered. I suspect the import script may have added the faction points to the wrong faction, most likely to Conclave of the Glyphs (the “the” isn’t needed).

Further, I noticed that while a few quests in the Conclave of Glyphs category assigned faction to the faction of that name, most gave the faction points to Conclave of the Glyphs. Specifically, the quests that are giving faction points to the wrong faction are:

Kimlorm Needs a New Prayer Book
Murago Puntjal’s Quick Favour
A Message for Dsar Sarraghi
Little White Lies
A Mysterious Disease
Grimal’s Tribute to Talad
A Dwarf’s Wish

The quest Something’s Brewing is placed in the Conclave of the Glyphs category, but gives faction points to Merchant Syndicates, which has the slight issue of not existing.

The quest Right on the Mine uses a quest item named Hamel Provision and at one point it’s supposed to be given to Gardr. Currently that does not happen. The quest will progress, but the quest item remains stuck in the inventory. It can be placed into storage, but otherwise there’s no way to get rid of it.

Sometimes targeting certain npcs after they’ve died can be trick/frustrating (particularly rogues/cutthroats etc after die animation). It would be nice if you’re in range of a dead npc and you press the “E” key, that it would either open the loot window automatically (instead of opening the dialogue window or doing nothing, depending on npc type) or open the context menu with the loot option (which already exists, it’s just on right click only which is slightly annoying because I frequently lose target on the dead npc when right clicking or navigating to the NPC’s body if I’m farther away).

A while ago I spent some time fighting some enemies, like ~20 hours worth of it over a week or two, and my armor has never decreased in quality. I think this is awful for the item economy. There is never any need to create new and exciting armors since once you have the set you want, you will never need to replace it. Almost every other item you use decreases in quality. I suppose tools could also be lumped into this as they also never decrease in quality no matter how much I mine, harvest, craft, etc.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

For crafting where the container automatically starts working when an item is placed in it (stock casting tank, forges, furnace, skillets etc), allow the “prepare” button to place multiple items in at once either through selecting a quantity at the prepare stage as a stack and/or adding a “fill container” option for things to be placed until all the container slots are full/the player runs out of the required materials.

ex. When casting stocks, after clicking prepare, it moves the first set of sludges into the stock casting container, but then if I click prepare again while the item is still in the container, it won’t let me place another item until it’s removed even though I can move another stack of sludges in manually. it would be nice to be able to automate that as it will remove a lot of clicks and reduce the time needed to process materials.

The quest option advised by Sharven (”[…] HE has decided […]”) is correctly presented by the interaction menu,

but on selection it is not recognised by Roniston (”[…] You could ask me to tell you about something, perhaps?”)

Quest progression is thereby blocked the Keen Edge chain broken again (after yesterday’s fix of “Slimy Doubt”).

The item description of a “Shiny Major Gold Diamond Necklace” states that the item has a (base-?) buff of +3 CHR.

It hasn’t when equipped.

Either the description of the buff effects need a fix.

in the quest Lori’s Little Delivery you are sent to the plaza to get a number on the fountain, there is nothing on the fountain to inspect to get the number for Lori

after speaking with Sysial you are teleported to the dryken plane instead of the proper location

After a server crash, if you don’t restart your game, your log will no longer be updated with what happens in game. This has been noticed by Gonger, Migg, and a few others.

The forge at Gardr’s smithy does not offer the usual interaction button when opening the container window. There are simply no buttons.

(16:59:00) [chat] >You cannot cast Fist of the Volcano on Eagle Gobble Hut. You can only cast it on living enemies.

If you can destroy the hut, it should also be possible to apply destructive magic. A living body should be the greater obstacle for magic to overcome when compared to inanimate objects.

I had heard that over a skill threshold, repairing weapons/armour does not reduce maximum quality.
Yet I repaired a weapon with 201 skill (with jewellery) and dropped from max quality of 200 to 199.

Maybe the Jewellery isn’t working properly, as without it, I would be under the threshold I had heard about.

Also Bones attribute was not removed, the whole reason I repaired it at 197/200.

Maybe this is as intended, but if Bones cannot be removed, then getting a Masterwork Bones Platinum Sword from your first and only run through of the Keen Edge quests (currently not completable) is xtremely bad luck after the time it takes to get 100 in sword (even more in UE).

After dropping several valuable items through world geometry without a chance to get it back I’ve got an idea to add a confirmation dialog for drop action.