PlaneShift

Noriko has been doing a lot of quest testing lately, and has found a number of quests where quest notes should be added so that returning players (or those who don’t use their logs) can pick up where they left off. I’ll pass along what she’s put in the petitions to this report.

*Road to Master Cook Chapter One
*Road to Master Cook Chapter Two
*Road to Master Cook Chapter Three
*Road to Master Cook Chapter Four

In each case, the quests notes are very good except when Mirra first gives the quest. The notes only include a generic line about helping Mirra be a better cook, and fail to mention where she’s sent you or what she wants.

*Helping Mirra

No useful quest notes at all.

*Where the Courier Went

Once the player gets the name Shian Sulkin it should probably be added to the quest notes, in case logs aren’t available.

I’ll add more as they’re reported.

As with other windows with 1600 by 1000 and other similar ratios it does not fit on the screen properly.

legacy allowed to discard repeatable quests

with alchemist fire/freezer equipped → attack npc
chat responds ‘You have no weapons equipped’

(I DETECTED IT ON OLD PS, DELETE THIS IF IS NOT APLY TO NEW ENGINE)

THE BOOK DRINK OF THE DOME HAS ERRORS:

DOUBLE SENTENCES LIKE:
COMBINE MUG OF HOT WATER, SCOOP OF STRIMPOTOR, 4 DASH POWERED BREAD RISES, MUG OF HOT WATER, SCOOP OF STRIMPOTOR, 4 DASH POWERED BREAD RISES INTO…..

USES A 0 (CERO) IN SENTENCES LIKE:
0 LIQUID BREAD RISES

Redo quest/events implementation to send/receive, also remove XML.

at the job bar tab is no scrollbar available,for some its there only if they max out the size of the window

Due to the number of enemies with de buffs to strength the problem arises when one of these de buffs occurs in combat and causes a player to become over encumbered. this will almost always result in a 100% chance of death due to the speed at which combat occurs and there being no mechanisms to quickly drop inventory in an emergency situation. The primary counter to this would be spells that either clear the de buff or counter it such as strength. Currently you cannot cast spells while over encumbered and I consider this a unfair and illegitimate restriction that actively prevents players from using the abilities required to counter the de buff and unfairly rendering them unable to defend themselves when this occurs during combat. I would argue the you cant cast spells while sitting and while over encumbered shroud be relaxed or removed because they only serve to ensure a players death due to a combat de buff and serve no reasonable or legitimate game play purpose

If the player attempts to open a locked chest by dragging it to their equipment panel. The game displays a message that the chest is locked but consumes the item anyway providing now loot. Expected behavior is that the game places the locked chest back into the players inventory or prevents them from consuming it if it is locked

There seems to be a problem with how incoming damage is being handled when casting spells in combat. The primary issue appears to be a glitch when casting a offensive spell where the player will loose their combat stance and be treated as out of combat which this seems to have the (hopefully)unintended effect of allowing incoming damage to bypass the players defenses completely any skills / abilities to reduce the damage and even seeming to nullify the effects of the players armor allowing creatures to directly deal massive hits directly to the players hp similar to if they were completely unarmed and unarmored. The result can a normally harmless enemy suddenly dealing critical damage and causing instantaneous death depending on the situation.

Expected behavior would be to not allow melee attacks during spell casting however the player should remain in the selected combat stance to ensure that armor and evasion occurs properly and melee attacks may be automatically resumed after the casting completes.

In Fishing Lessons for Fish, the quest dialog does not match the quest notes for that particular task. In one possible task the player is told to get 6 eels and 7 manta rays, but the quest notes say 7 eels and 6 manta rays. The player seemed to indicate that it was the notes that were wrong, but isn’t online for me to double-check.

When opening a chest, sometimes it will say “you find some ingot”, but give you none.

Seen it on Reinforced chest, sure I saw it on a different chest before as well.

The are for harvesting Blue Cohosh Root is so small that you need absolute precision to harvest a second time, without “You cannot harvest in the same place twice in a row”.

It’s possible but takes longer to find the right spot, the area needs to be bigger.

Magic Staves, like the Staff of Empathy/Aurora are always blocked unless they miss.

I’m not sure which weapon skill they use, but they are even blocked by dummies

In the CC tab it says “Xiosa talks to you through nature,” Xiosa should be Xiosia.

When showing Levrus the Bronze Bands you can ask him to remove the magic, but when you return them to Nalri there are only options to say “You must see Levrus, he will remove the magic” Or “If you stay away from the objects, it will go away”

The book shows

Powdered [Raw Material]
Grind [Raw Material] into Powdered [Raw Material] using Alchemist Table with Wooden Mallet
Hammer [Raw Material] into 3 Big Chunks of [Raw Material] using Alchemist Table with Wooden Mallet

Both using Alchemist Table with Wooden Mallet
When only the 3 big chunks is correct

I’ve completed the child quest that looks for the Boss around Gugrontid, but Sapling of Xiosia hasn’t completed as well.

Banded Mail Armor stores in MA category, trains MA but the description reads HeavyArmor under the weight/size/quality. So can we get it changed to read MA please.

I made barberry extract and ended up making batch of valuable barberry extract. Seeing as barberry extract is not a finished product but an ingredient it should not receive any special properties from crafting.

This is actually for version 0.6.5.

When I craft Small Battle Axes I find that all skill gains are in Blades, Blacksmithing, and Mace making. I feel that somehow the skill gains for Axe making have been replaced by Mace making. That makes it harder to build up axe skill to turn the kits into a finished axe.

Axe handles need changed to blades making

http://www.planeshift.it/Roleplay%20Guide

Last paragraph: kra has no gender therefore the he’s should be changed to kra’s.

The kran looks at the written page, tilting his head a bit and scratching the top with his left hand. - “Well, I never been a novelist, but that should do it, I guess.” He stands up from the giant crystal table, picks a thick cloak and looks outside the window of his sculptured stone house. He concentrates a bit and thanks to his magic vision, he reaches the Hydlaa plaza. - “mmmm… there is still much more to do, but things are surely getting better. Time for some magic!”

The kran looks at the written page, tilting kra’s head a bit and scratching the top with kra’s left hand. - “Well, I never been a novelist, but that should do it, I guess.” kra stands up from the giant crystal table, picks a thick cloak and looks outside the window of kra’s sculptured stone house. kra concentrates a bit and thanks to his magic vision, kra reaches the Hydlaa plaza. - “mmmm… there is still much more to do, but things are surely getting better. Time for some magic!”

The Mace Making Practice Points seem to be inconsistent with other crafting. With a skill level of less than 20, everything only takes 5 seconds to make regardless of the complexity of the item being crafted.
Wondering if a higher blacksmith skill is weighted more. Only getting 5 pp per item crafted will extend leveling ability time dramatically.

Just an FYI but the info being posted on the calendar for the dev meetings has a typo. Under Content, second sentence the Word developers is typed Devevelopers.

I recently wanted to create a shortcut to summon my Rivnak, but it doesn’t work exactly like it should…Here are the commands of my shortcut :

/dequip leftfinger
/equip Ring of Summon Familiar
/pet summon Bigadin
/dequip leftfinger
/equip Crystal Ring

Of course, using the commands one by one in the chat works perfectly. But here is the chat log after using the shortcut :

Usage: /equip [stack count] [slot] [item name]
You feel a connection to your familiar.
You’ve gained 1 Practice points in Empathy.

Weirdly, it seems that when the last line is executed, my ring is still considered equipped, and so it cannot be equipped. I thought that with another item which exist in several copies, it would work through equipping another copy, but even that do not work. I tried using it with 2 Silver Rings in my inventory (so the line /equip Crystal Ring become /equip Silver Ring), and both when the quality is the same and when it is not (and so it doesn’t stack) :

You feel a connection to your familiar.
You’ve gained 1 Practice points in Empathy.
This item cannot be equipped.

I hope the informations are sufficient to allow you to understand and solve the problem.

I tried attacking a kikiri with two ‘Dark Dagger’ and I got the following system messages

(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.

So every attack I do with two Dark Daggers is doing two rounds of extra damage and not just one extra round of damage.

During fight using ranged weapons if the player is attacking a mob but doesn’t face them the arrows are still used but no attack is led and the message about facing the target is shown.

Sometimes attacking with ranged weapons cause the showing of the facing target message and the attacks are not dealt even when the target is near and straight before the player (the arrows are consumed as well).

As the title suggests all magic items made by crafters need to be identified. As every magically crafted item made the same way ends up giving exactly the same buff, there is logically no need for the crafter to need to identify an item as they will always know what it will do…

Kran Walking is slightly asymmetrical, as though they were afflicted with scoliosis and weren’t treated completely.

Ignore, of course, if new models lack this trait.

This is a collection of Combat System bugs

When a shortcut that uses an icon is moved the name of the shortcut disappears and is replaced with the shortcut number.

Hi
I seem to have a glytch where frequently (but not always) an NPC will not talk to me no matter how long I wait
However if I click “Bye” and try again he will now talk
It means I have to click every NPC when he wont speak to me twice to be sure there is no dialogue

I crafted two bows, the NPC-Price for the Enkidukai Shortbow (needs lvl 20 in bow making and more material) seems to low.
Enkidukai Hunting Bow, Q170; 1588 Tria
Enkidukai Shortbow, Q193; 1531 Tria

• I was playing my pan flute.
• I swapped the pan flute against my plat steel sabre.
• I stopped the playback.
• I fought.
• I wanted to reequip my pan flute, but it could not be moved, not even from one inventory slot to the other.

I suspect that there is no test for (music instruments/)items being in use when swapping them

If you delete everything in the boxes and click the save button, the commands are back after relog.
It seems there must be at least one character in the box to get it saved.

with dummy targeted
/pet target
/pet attack

from longer distance pet fail to attack dummy, it hit arena wall and dissaper
from very short it attack and start rotating.

when i start atack enemy that is little away and before i see message he is too away switch (with shortcuts /target nearest /atack) to nearest im in combat mode but dont see any system mesages and not doing any hits- it happend in other situacions too but that i know how to reproduce

its worse to aim enemy , i often see ‘you are to away’ in first try and without move next attack hit enemy correctly

Logging out after a longer time of idling, one would expect to login with full health later. But I noticed that my health is a little lower and starts regenerating after I logged in. This is especially obvious for characters with not yet maxed stats, appears to be a relative impact.

I wonder if this is caused by buffing armor parts, e.g. Ulbernaut Bracers (+8 Strength, boosting HP too, indirectly). I could imagine that the max. HP are calculated without buffs, and the current health gets limited to this lower maximum (lower than while logging out previously); then the engine loads armor parts after logging in and has to update the HP maximum, which is now higher with buffs, and the current HP get a headroom to fill up.

When working on bow making at the Arena smith table: if you /use the table, when the progress bar shows that you are done, instead of being done with whatever you’re doing, you get a message that reads “You interrupted your work when you moved away” without having moved at all.

I’ve repeated it multiple times working on a few different things, but haven’t tried at any other smith tables yet.

I opened
planeshift/data/gui/scripthirednpcwindow.xml and got the mesage at my browser.
At Line 4 is savepositions=”yes” twice listed.

Fri Dec 19 09:55:20 2014, <src/common/paws/pawsimagedrawable.cpp:69 PreparePixmap SEVERE>
Fri Dec 19 09:55:20 2014, Could not open image: >Scaling Field Background<
Fri Dec 19 09:55:20 2014, Fri Dec 19 09:55:20 2014, ART ERROR: PawsTextureManager wasn’t able to load the requested image: Scaling Field Background

This bug occurs on a fresh install of the Linux 64 bit 0.6.1 client, after update to 0.6.2.

The machine is a Lenovo T430 running Parabola GNU/Linux-libre.

lspci:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

sudo lspci -s 00:02.0 -vvv:

00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])

Subsystem: Lenovo Device 21f3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Address: fee00018  Data: 0000
Capabilities: [d0] Power Management version 2
	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915

uname -srvmpio:

Linux 3.17.6-gnu-1 #1 SMP PREEMPT Tue Dec 9 04:18:43 UYST 2014 x86_64 unknown unknown GNU/Linux

The “Wild Pterosaur” model still has a saddle on it’s back, making it seem not so wild.

When there is foggy weather in the game, some 2D textures will have white boxes around them. The most well-known instance where this happens is with the target effect under an NPC’s feet. I think this also affects 2D grass textures like at the magic shop forest. Basically, the fog makes transparency in certain textures visible by making them white.

My Kran can eat certain non-Kran food, such as fish, bread, and possibly other kinds of food without getting indigestion.

Since plenty of other non-Kran foods give indigestion, I’m sure this isn’t normal.

When you are playing a song on an instrument, if you close out of the sheet rather than clicking the stop button, the music will continue to play. This seems to continue until you relog, and opening and using the sheet again doesn’t fix it, it will only make you play two songs at once.

I am not sure if other players hear this or just the player.

In my opinion, X’ing out of the music sheet should work just like the stop button.

There are many time in quests and KAs when they have the same trigger, for example “about armor” or “about apples”.

When you click a quest menu (or type some text to an NPC) the first dialogue(s) to be searched should be quests and if a matching trigger is found the quest menu should be sent, then if nothing is found in a quest it should search KAs. What is currently happening when you have two or more matching triggers you are getting a random choice between the quest response and the KA response. This results in players getting what seems to be a response from the NPC but the quest does not continue.

Some of the musical notes, when using the Lute and Lira (drum seems okay), have an annoying white noise in the background. The audio is not clean, and this can be bothersome particularly to people with high-end headphones who may be able to hear it better. I am not sure if this is audible to all players, but it certainly should be to anyone with a good pair of headphones.

Some popping sounds can also be heard.

I am not too knowledgeable on music, so I can’t say which notes specifically have unclean sound, but I think since it can be heard plainly it should be easy to find out.

test case

As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.

Potentially related

It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.

I can make this happen by following these steps.

1 - Button height to minimum
2 - button width to manual (and moved to minimum)
3 - button width to auto
4 - set button height to max
5 - button/icon width is fixed and when you change name↔icon you get the broken display

If you don’t follow these steps the width for change between icons and names works correctly

Scrolling with the mousewheel does not work if the mousecursor is over one of the listed buffs.
It works only if the mousecursor is besides or between the buffs.

svn code r9595