PlaneShift

Could it be possible to add server version info (and possibly aso recommended/required minimal client version) to the server status page, i.e. to http://planeshift.zeroping.it/index.php?page=about_page for zeroping server? It could help to determine easily whether the update is required/recommended without need to start pslaunch when you don't use it to load the client.

It happens for me always again after “opening” and closing nodes. Sorry, haven’t found a way yet to reproduce it every time. Might add some more information here once I find out more ;)

It dispalys the newly opened node above a previously already opened one.

GMail uses the + to denote email aliases: foo+bar@gmail.com delivers to the same GMail inbox as foo@gmail.com. The PS validation system rejects the + character client side, although it is permitted by the RFCs (see RFC5322 s3.2.3/3.4.1). The easy fix is to be much more liberal on the client about what is allowed in an email address, since we’ll be emailing a validation code to it anyway.

The text in speech bubbles is hardly readable. It seems that the black shadow covers the bright colored text.

Essentially the same issue as http://70.32.40.136/flyspray/index.php?do=details&task_id=5579 except that the file in question is amb-day_forrest_4 This is happening in the outdoor area at the arena.

Fri May  4 19:13:58 2012, <src/plugins/common/soundmanager/data.cpp:167 LoadSoundFile SEVERE>
Fri May  4 19:13:58 2012, Can't load file 'amb-day_forrest_4'!

for now I added:

<Sound name="amb-day_forrest_4"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

after:

<Sound name="amb-day_forrest_3"       file="/planeshift/art/sounds/amb/day_forrest_3.ogg" /> 

If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.

Probably losely related to PS#5629

Grinding Kingsfoil or Wyn Pulp to Paste works in a reasonable time.

But trying the same with Red Mangrove or Sinaflar takes much more time than my Mental Stamina (669) offers. The result is a "Pile of Dust". Did someone move a decimal position?

It’s very easy to miss tells, greetings and etc. For example if I talk with NPC, NPC tab in chat selected. Other char comes and tries to start dialog with me. As I read what NPC says, I miss blinking in the Main tab, so I ignore that char. As for RP, it seems that I’m very impolite because ignoring other chars. Adding popup for messages addressed to me solve this problem and I can immediately(if I want) reply to char.

My suggestion(technical background):

• on each command like <CMD> <TO_PERSON_NAME> generate event with message(tell, greet, etc.)
• this message shows in the main view like other notifications
• this popups can be toggled off in settings

lesser piles of dust (seem to be from emeralds) get assigned a number that is negative. As these are not loot they should not be going through the function that assigns a value. Crafted weapons do not get a value.

Several players of old characters who had a Groffel as pet before the quest wipe, and have to redo the pet quest, are unsatisfied that they don’t get a Groffel again, but a Yulbar instead. See: Status of Our Old Pets

May be that Yulbars didn’t exist at all when they got their pet.

May be that Yulbars are somehow preferred now, or there are just no complaints about Groffels so there is a bias about it.

Would it be possible (without extreme efforts) to ensure that redoing this quest creates the same pet race as before? Or would it be possible in cases of old characters redoing the quest after years that they are allowed to chose the race — for emotional reasons?

Instead of directly opening the book copy text, it would be nice if a book showed a regular info window first. Title, the authors name, and generic book description. If a Read button were provided, that then opened the window with the book copy text, perhaps an event could be generated so there could be read and unread books in ones inventory. Being able to carry and inspect an unread book perhaps gives some interesting quest possibilities.

I was just wondering if an in game log viewer could be implemented. I don’t know how to minimize and I have to quit my game every single time I want to check my logs, also it’s useful. And makes so that new players don’t have to go around, wondering how the hell they can solve a quest, when they forgot some crucial information.

If I get a new quest while the quest & event notebook window is open, the quest doesn’t appear in the list until I close and reopen the window. Can getting a new quest cause a refresh of the list of uncompleted quests?

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

I would enjoy reading a bit of the Greataxe Nyshyn identified. But the scroll is empty.

Nothing major at all, but I cannot change the severity. Is that up to the poster?

Anyway, just on the other side of the wall from Akk-Central -4.46 0.70 4.32, in the empty space, is a bit of grass floating around.

I have been playing around with the llvm/clang static source code analyzer (http://clang.llvm.org/get_started.html) for a while, and thought it might be fun to run it on the planeshift source code (svn r8433). Even though especially the c++ analyzer is still viewed as beta quality at this time, the results are interesting and can be found here :

http://lbalbalba.x90x.net/clang-analyzer/planeshift/

I made a char with a very short name (Min).
Everytime some says a word this name is part of (like “I’m coMINg home.”), the whole line
gets highlighted in blue.

Accorind to the /help menu, " should be able to say "/join 0" and then "/leave 0", but /leave does not leave "0". Intead it says, "Please specify a chennel hotkey number to leave". Am I supposed to know what a chennel hotkey is?

I think the dungeon is darker at night. I need a torch then. This makes no sense.

Hi! As reported in "bug" (bug #5867) spell effects performance is pretty slow on Intel Sandybridge HD 3000 graphics. I understand that this may well be a driver / hardware limitation. Due to the extreme slowness its not easy to roleplay on events when other players cast effects, cause then basically I can not do anything anymore. Except for that the performance is quite nice for onboard gfx, enough for me at least, even at 1680x1050.

Cause of this I would like a way to reduce the quality of *just* the spell effects a bit. I found that I can disable them alltogether by setting shaders to "lowest". But any other settings for shaders doesn´t have any visible effect on performance. Also shaders to "lowest" worsens the other gfx as well.

I also learned I can disable spell effects altogether, by removing the *.eff files from effects directory.

What I would like now is a way to configure spell effects to reduced quality and (hopefully) improved performance. This may also be good for other users of old hardware.

Thanks,
Martin

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

I've done them…several times, and frankly I'm tired of seeing them offered. Could we have a setting for "Hide Completed Repeatable Quests" that we could enable to stop them form showing up? At least in one case, an NPC has enough repeaters that they show first and new quests are pushed to the 2nd page in NPC Dialog view. If one overlooks the page arrow, one might miss the other offerings.

Filed as Feature Request in Engine > Quest Dynamics…please move it if that's wrong.

My character was attacking a Rogue in fully defensive mode with the following spells active and the damage was not noticeably reduced.

Animate Vegetation
Armoured Skin
Defensive Wind
Dome of Perfection
Lesser Future Sight
Rock Armor
Water Barrier

This is ridiculous.
One of these spells should have some protective effect and all of them active at the same time should have some additive effect.
Character was wearing no armor at the time.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

It can be handy to have two separate “Suggest name” buttons for first and last name fields in character creation screen.

It opens an easy way to find a nice combination of first / last name for a new character.

Several times now a sheet of music I have been editing would, after I closed it and reopened it, display only the first line, even when I went back to edit mode, had already saved it, loaded it to a second sheet, and restarted the game.
Needless to say, this is making it impossible to finish writing the piece of music!

/pos: bdoorsin -180.54 19.71 -864.52

How to reproduce: Run into the area between the large boulder and the cliff face there.

What should happen: Your char should, at worst, have to /unstick out of it, or be respawned due to the map leak.

What does happen:

1. Your char (sometimes) gets ‘leaked’ off the map and starts to fall through it
2. As your char falls, they get put back in the normal map area because of the concavity of the cliff face below the path there.
3. Result: a DR trip, because your character goes “splat” at the bottom of the Bronze Doors canyon.

Over numerous days my character has left items on the Gug altar. After un-guarding them with /guard they are checked and seen not to be guarded by the character anymore. Upon return on a subsequent login they are found to be guarded by the character again. The same items have been un-guarded several times with the same result.

I was working on a batch of Liquid Bread Rise and kept getting “You are not sure what to do with this.” I realize this will probably be nearly impossible to reproduce so I’ll try to explain as best I can exactly what I was doing.

I had started by combining the ingredients (1 Foaming Water, 2 Pinches of Salt, 14 Scoops of Lard) on the preparation table, yielding Unmixed Liquid Bread Dough. Then decided to combine them in the wooden bowl so I could go straight to the mixing step. I had already combined 3 when I switched. I added the ingredients to the wooden bowl and combined, letting it automatically do the mixing step, and this worked fine. The I tried to mix the Unmixed Liquid Bread Dough I had previously combined on the table and that is when I got the “You are not sure what to do with this” message. As long as I combined the items in the wooden bowl and then mixed them I had no trouble. If I tried to put in previously combined Unmixed Liquid Bread Dough it gave me the error message. Several times I reflexively hit the Take All and Stack before it was mixed, and when I tried to put it back in the bowl and mix it I got the error message.
Eventually I had to stop and measure out more scoops of lard, which required switching my wooden spoon for the scoop, since I was also holding a Dagger of Seduction (and wearing a Merc Helm of Seduction, if that matters). After I switched back, I was able to mix the Unmixed Liquid Bread Dough without any trouble… for awhile. (I didn’t realize right away that was what made it work)
Eventually though the problem popped up again (when I prematurely grabbed the mix before it was done, and tried to put it back and finish mixing it, it said “You are not sure what to do with this”) Again, the problem resolved when I switched to measuring lard and back. This happened three times in all. I didn’t put together that it was when I switched tasks that it started working until the third time it happened, so I didn’t have a chance to try just switching tools to see if that was what was fixing it.

I think it would be nice to see the actual quality of the stored items too in the storage.

Now, you can see the amount, the price and the name of the item.
Sometimes with lot of similar items but with different qualities, it could help you to chose what you need.
At the moment, you need to click on each same named item stacks to see what you need.

I know it would reduce the maximum number of the storable items per category, but considering the long names of looted items, I think this 8 bytes wouldn’t make big difference.

There are quests with almost no automatic quest notes documenting the progress, except for the first note describing the purpose of the quest. This is especially annoying when you have to get a specific number of items and need to scan your logs, like in old times before automatic quest notes were implemented…

Open quests are in italics, the rest is already completed.

• A Hammer for Hamel (Hamel Warson; only 2 notes, the second is confusing - sounds as if the quest failed)
• Drinks in the Deep (Crosh Dunehammer)
• Get a Performance (Roya Vuntarr; just started, but already missing a log of the direction where to go)
• Harnquist Weapon Commission (Harnquist)
• Introduction to Science (Durok Rrecrok)
• Ring of Familiar (Levrus; just started, but already missing a log of the required ingredients)

When you trade with and NPC and it is walking, it won’t stop, and you will no longer be able to buy or sell anything from it, since it will be far away from where you started to trade…

I think melee skill has too low damage compared to weapon skills.
It takes to level up the same efforts, costs and time as any other combat skill, and for that you get very low damage.

I measured MELEE on the Training Dummies, got the following:

Normal stance:
min: 46
max: 77
avr: 62.7

Bloody stance:
min: 53
max: 91
avr: 74.8

I used a Q50 ShortSWORD and got these results (and who does use a Q50 weapon nowadays at all?)

Normal stance:
min: 91
max: 153
avr: 126.4

Bloody stance:
min: 107
max: 180
avr: 145.3

And a Q50 Normal BOW:

Normal stance:
min: 99
max: 167
avr: 137.6

Bloody stance:
min: 116
max: 199
avr: 164.8

If I was using a Q300 Shortsword or Bow, these results would be higher by times 1.7x.
If I was using a Platinum Steel Longswords, the sword results would be higher by times 2.1x.

Conclusion:
Melee skill makes about only 50% damage compared to Q50 Sword and 45% damage to Q50 bow.
And please notice, that I compared the skill to Q50 items only.
In case of melee you have no chance to craft a better weapon, you have no chance to loot weapon with good modifier.

Suggestion:
I suggest to raise the damage of melee skill by at least 260%, because it takes to level melee up the same efforts, costs and time as any other combat skills. Otherwise melee is just a good RP skill :)
(Raising the damage by times 2.6x would be similar as you would use your hands as a Q300 Shortsword, taking the delay into account too (equalized damage per second values). Melee has 1.5 delay, Shortsword has 2.0 delay.)

Raising the damage by times 2.6x would cause:

Normal stance:
min: 119
max: 200
avr: 163.1

Bloody stance:
min: 137
max: 236
avr: 195.5

I would like to continue chatting while I load to a different map. Can the chat window become independent and on top of all windows?

Sometimes I would which i could sort the storage list in a different way. Would it be possible to add bi-directional sort options in the storage/buy window?

I noticed in a characters inventory that “The pastry Chef” book was not displayed as an icon, but was displayed as text “The Pastry Chef”.

It appears that the newest icons have not been loaded or are not reference correctly from MyPlane.

(I think the severity is low, but I was unable to change it.)

I have spent days trying to name my drifter with various names. I have confirmed I am using the correct command. /pet name [name] while having the drifter highlighted. I also tried various versions of this…
/pet name {name}
/pet 1, name [name]
/pet 1, name {name}
along with many, many different names. They all come back invalid.

Then, after several days of trying, I received the message, “You have no familiar to command.” So, I tried to dismiss my familiar and received the message, “Your pet has already returned to the netherworld.” I was standing there, in game, looking at the glider when I received all these messages. So I tried to summon the pet and another one popped up, so I had two in game at the same time, both named, Aszrai’s Familiar.

If nothing else, please remove the second (or both) familiar from the game. But it would be nice to find a way to name my familiar, but not a priority.

I have an image, which shows them both near the smithy in Hydlaa, but I was unable to figure out how to attach it here. I’m sure one drifter will stick around at the smithy for quite some time.

Thanks for your time and help!

For an example.

In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.

The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.

This appears to be an option to have lines that appear in Main chat prefaced by origin e.g. [guild], [alliance], etc., provided a user has filtered messages from other chat tabs to appear in Main. However, it seems to work whether or not the option is enabled. Is this a bug or just deliberately no longer an option?

Regardless of which of the three options is selected, communication seems to switch the active tab automatically to Main if the current tab can't display it. Bug or intentional?

When a player summons a mount (creature to ride on), eventually the creature disappear depending on how high Empathy skill is.

When trying to use the RING Of SUMMON FAMILIAR again, it says it's depleted and can't be used.

Please kindly create an ALERT in the MESSAGE TAB of chat telling player how much time remaining is left to wait for the ring to be used again with a countdown and then a sound effect that reminds the player that magical energy is now regenerated in ring.

Many Skills are NOT yet implemented, which is perfectly understandable.

Please kindly HIGHLIGHT with another color (representing NOT YET IMPLEMENTED) which skills have NOT been worked on yet.

This will greatly help ALL players know which ones are full completed and which ones are not, especially NEW PLAYERS who won't waste time trying to figure out what has not been worked on yet.

Recommended Color: Bright Purple (easy to see and readable)

messages.cpp misses another operand?

if(command == “/newguild” || command == “/endguild” || command == “/guildname” || command == “/guildpoints” || command == “/allianceleader”)

 {
     guildname = words.GetTail(1);
     return;
 }

Setting guild MOTD is accidently tied to public notes privilege?

guildmanager.cpp

  if ( ! IsLeader(client))
      if ( ! CheckClientRights(client, RIGHTS_EDIT_PUBLIC, "You do not have rights to change the message of the day in your guild."))
          return;

My understanding is that /setmemberpermissions [member-name] should allow a user with editing permissions to set/change individual guild member permissions, but the command seems to be broken. A bug or intentional?

October 25, 2013 If 'User Interface' the wrong "Area", please move this request to where it should be.

This feature request is to provide a VIEW ONLY capability for stored items in our inventory, regardless of where we are located in the game. To be able to view exactly what we would see if we were standing in front of a storage NPC would be ideal and would be in character.

We could sit for hours and log all of our stored inventory items in a book and update it, but gaming is meant to be fun.

By granting this request it would be easier for players to:

• Help new arrivals to PlaneShift

• Help merchants know exactly how many items they have stored away that could be sold at the marketplace

• Grant auction requests much faster since we wouldn't need to run to a storage NPC to see if we have the requested item

• Complete quests. For example, we'd see we only need 2 more tefu-skins or one more gold ingot to complete a quest

every other game I’ve played helped its players out with a world map and mini map. in some of them, some areas in those games might not have allowed maps. but they all had maps. why doesn’t PlaneShift have a map system to help us navigate? or at the very least give us a compass!

Pretty much says is all. Possibly depends on  FS#5366 

Venalan will understand :)

Drifters Section

“This gas is highly acidic and damages a persons equipped items if they stand in the mist.”

This should be changed to:

This gas is highly acidic and damages a person’s equipped items if they stand in the mist.

Note the apostrophe to indicate a singular possessive noun (person’s).