after you'd exhausted to move while riding, and you've unmounted and dismissed your pet, you can't move until client restart.

How to reproduce:
1. mount your pet
2. ride on it while you exhausted to move
3. run shortcut:

/unmount
/pet ID, dismiss

4. you see your physical stamina is full and you can't sit or move anywhere.

PS: if you is not exhausted to move, this bug not occurs.

FR by Vakachehk:

I have an idea for mounts which will need some changes to some maps.
For Rivnaks (maybe Drifters too) having stables in which without a ring you may summon them, and dismiss them, without any skill of any ring needed, maybe a tria fee of like 50trias every summon/dismiss (of course there's the obvious issue you un-mount and leave your Rivnak somewhere, either the game automatically dismisses it or it is able to be stolen via a player, or a mechanical guard comes and takes it back to the stable or whatever). Using your Ring of Summon Familiar you can use the skill Empathy to dismiss/summon/etc, anywhere at any time.
Also I was thinking about the skill 'Riding' maybe this could be trainable and used in combat while on your rivnak?

The engine code was clearly coded to not allow - so till a different decision is taken these npc are all bugged and should have the - stripped

Brintec Dev-Onni
Vladovic Chel-Astra
Sharven Xant-Areth
Uri Djho-Maat

thanks to Vakachehk for the list

The grill in Reffitia's kitchen in Brado's tavern doesn't behave like other items in the kitchen: The preparation table, for example, is selectable and has a label. The grill is not selectable, and it has no label. One can interact with the grill (e.g., store something in it) just as with the preparation table by right-clicking it. But the grill is much harder to identify, since it has no label.

The skybox texture doesn’t seem to be correctly scaled to the skyboxes. Its borders are cropped and this results in very sharp and somewhat odd skylines:

PS 0.5.5

When the monster is somewhat near you, the movement simulating firing an arrow with the bow is showing. However if the monster is quite far away the movement stops showing until either one of you gets closer to the other.

The paragraphs ‘§’ on the walls of the guild house map “guildlaw” are mirrored. For years already (just always forgot to report it).

I really like the sewers in Hydlaa, and I think it’d be cool if the other cities (Ojaveda and Amdeneir, mainly) had something like that. I also think it’d be cool if the Hydlaa sewers had a couple more openings, and maybe some intentional service entrances instead of just cave-ins with ladders… And maybe an entrance/exit in the East? Then my Rogue-like character could travel by sewers more, which would be totally awesome.

Are you guys planning to add some more sewers eventually?

Index: src/client/gui/pawscharcreatemain.cpp

   view->Show();
   view->EnableMouseControl(true);

   {
       maleButton->SetState(false);
       femaleButton->SetState(false);

If you take a heated blade out of your hand while hammering it the work will not be interrupted until the work duration if finished. If you return it to your hand before the work is finished the transformation completes successfully.
THis appears to only work if you replace the item with itself, substituting a different identical item or a completely different item causes an interruption.

I play a Grey Klyros male and after I got my robes I noticed that if I put them on and took them back off, my arms became blue.
This is an easy bug to recreate, all it requires is a grey klyros and a robe.

You can easily shoot with a bow ingame to ranges far beyond the range of combat messages. Mob aggro (and sometimes the archery anim) do not work at such long ranges, either.

The right hand of the Klyros looks like their claws poke through their fist.

There are several issues I experienced during testing the Character Creation / Race Selection:

• Hair style is hard to check if manual rotation is necessary during zoomed view.
• Male Ylian: blonde/brown are confusing names for face textures, they should possibly be changed to emotions. Blonde 1 and Blonde 2 appear identical.
• Male Dermorian: Face style “Forehead tatoo …” is too long to be readable completely
• Female Dermorian: “Medium” style is shorter than “Short” style
• Stonehammer: Race description still mentions “Stonebreaker”. Many descriptions may need an update after the race renovation.
• Male Stonebreaker (and others): Hair and Beard styles may need a more descriptive name.
• Female Stonehammer: Traits seem to be misordered. If “Braids” are the two long upper tails, and “Rivnak tail” should probably be the one long tail, then “Lavvar tail” should instead be the two small low tails? What is a Lavvar, anyway?
• Kran: I’d prefer visually disabling both male and female gender buttons. Leaving the female activated might be confusing.
• Female Ynnwn: Face style “White eyes” doesn’t use white eyes. The name should possibly be changed, e.g. “Aged” (in contrast to “Young”).

I have noticed a few things that are Incorrect, not sure If anyone commented on them, Or If they are In Progress. I will jot them down all in one Report so not to make several reports…

1. The “Cone” On the Energy Arrow Is faced in one direction As in the visual effect right after the energy arrow hits the target (Im sure im not the only one who see’s this wrong?)
2. When Dropping Stacks Of Items Like Pants There is an extra “ES” at the end. Alot Of Items Have The Extra “ES” at the end, that should not be there.

I Had A couple Questions and Requests :)
1. Someway to Turn off the red dropping notifications like.>”You are to far away to attack” and ““**” Has nothing to be looted”. maybe a way to just have it in the system tab.(Asked in help tab, unknown, If someone knows how please tell me lol, thanks!)
2. An NPC Or something In Game That could tell you detailed Information about weapons/quest items and things of that nature, (I have seen the Book in the musium, but I haven’t really studied it yet, and maybe incomplete?)

  It would be really cool if you could go to an npc and hand them what you found, have them give you 2 lines about the sword and what it does. Or even a book from a quest where you can i.d it, have it unidentified untill you take it to an npc and pay them a really small fee to i.d it. (Not complaining at all but I have kept all of my named items I have looted since I have started playing. they are awsome! :D But I want to organize :) please? :D I want to sell them but I dont want to sell something for 10,000 and find out that it was really special. haha with my Inventory im sure I could write the book!

If you want to comment on this aswell, up to you. I will be blunt to the point:
I have seen leather working Implimented But Famiel Is the one and only charature I will have. But He is Forbidden to work with Furs/Hides other then looting for sale. he wants to start making his own armor, so I ask/Hope there is a way to bypass leather armor and make Medium/Heavy Arms/Boots/Gloves when it gets implimented
Thank You For Your Time :)

As per this document:

http://planeshift.ezpcusa.com/pswiki/index.php?title=Sound_System#Sounds_in_factories

the creature sounds are not working properly in game today.

The common.xml file is properly read, and the resources are properly loaded, but the only state ID which works consistently is state ID 2: charge.

Idle seems to kick in only after attacks, and anyway not consistently. The others are never launched. The problem is that those events are not properly sent to the client a sound events.

In particular we need the following events: IDLE, CHARGE (when first engages in combat), COMBAT IDLE, ATTACK, (being) HIT, DIE, WALK, RUN.

I would like to see 2560×1440 added to the list of monitor resolutions in the launcher.
For example:

Index: src/pslaunch/pawslauncherwindow.cpp

   }
   else if(ratio == "16:9")
   {

       resolution->NewOption("1920x1080");
       resolution->NewOption("1366x768");
       resolution->NewOption("1280x720");

A general problem with the quest menu system at the moment is the speed at menu disappear. The problem occurs in the following situation.

All the following is within one step in the following format.

Player gives NPC 1 item.
Menu: text.
NPC: text.
Menu: No. Menu: Yes.
NPC: text.
NPC: text.
Give 1 Melorick's Scroll Case.
Assign Quest.

You give the npc the item.
The initial npc text appears.
Once they have finished talking the next two menus appear, but before you are able to click on the menus the menus vanish.
This results in you losing the item needed to trigger the quest/step and are unable to repeat it.
This was only became a problem with the introduction of the 'bubble' menu system.

My character was attacking a Rogue in fully defensive mode with the following spells active and the damage was not noticeably reduced.

Animate Vegetation
Armoured Skin
Defensive Wind
Dome of Perfection
Lesser Future Sight
Rock Armor
Water Barrier

This is ridiculous.
One of these spells should have some protective effect and all of them active at the same time should have some additive effect.
Character was wearing no armor at the time.

It has been brought to my attention that friendly AoE spells can be used to detect invisible GMs who are within the range of the spell. A check on spells cast from accounts with 0 security could be added that only allows friendly spells to be cast on targets which are ‘visible’ hereby preventing GMs from being targeted when invisible.

There are quests with almost no automatic quest notes documenting the progress, except for the first note describing the purpose of the quest. This is especially annoying when you have to get a specific number of items and need to scan your logs, like in old times before automatic quest notes were implemented…

Open quests are in italics, the rest is already completed.

• A Hammer for Hamel (Hamel Warson; only 2 notes, the second is confusing - sounds as if the quest failed)
• Drinks in the Deep (Crosh Dunehammer)
• Get a Performance (Roya Vuntarr; just started, but already missing a log of the direction where to go)
• Harnquist Weapon Commission (Harnquist)
• Introduction to Science (Durok Rrecrok)
• Ring of Familiar (Levrus; just started, but already missing a log of the required ingredients)

Sometimes I would which i could sort the storage list in a different way. Would it be possible to add bi-directional sort options in the storage/buy window?

I noticed in a characters inventory that “The pastry Chef” book was not displayed as an icon, but was displayed as text “The Pastry Chef”.

It appears that the newest icons have not been loaded or are not reference correctly from MyPlane.

For an example.

In the Catalog of shields book, ‘Bronze Spike’ becomes un-greyed and therefor visible as craftable when blacksmith hits 15. but you also need many levels in shield making before you can actually make the item. If I push Blacksmith to 200 and leave shield making at 0, according to the book I can make every item in there, despite that clearly being wrong.

The skill checks being made on the crafting books need to look at primary and secondary and as many skills are needed to make an item to correctly mark it as something you can make.

When a male nolthrir is mounted on a rivnak his legs stick into the rivnak.

Sometimes when I’m attacking NPCs with a spell, I’ll see the following messages:

“I failed to move, will teleport in 5 sec.” “I was teleported here, waiting 5 sec.” “now I located the spawn point.”

I’ve had this happen with rogues in Ojaveda and in the Sewers where there don’t appear to be any obstacles to their movement.

It’s really annoying to have to go track down the NPC to finish it off.

Commanding pets is similar to combat skills in that you get no experience for using them but in the case of of combat you get the experience for the kill. I could not get my pet to attack with my 30 empathy, I was able to get a message that my pet targeted successfully as well as a message that my pet needed a target to attack.

Practice seems to have a cool-down period where subsequent commands give no practice. I would think that the cool down period should just be for identical commands, when you need to target something before attacking both actions should give practice.

It would be good to have some information on the state of pet activities.

When you change button height font does not scale so you can end up with buttons with font cut in half.

Button width can be changed if it is set to manual or auto, you should only be able to change it when on manual.

Font - display for the current font should be taller and wider to show the whole font name. The position of the drop down menu could be moved up and menu size increased to avoid the need to scroll. Ideally the font choices should also use the font they are named after to make it easier to chose.

Health and mana - when you hide the bars you end up with a big block of empty space. It should be set such that this ‘dead space’ is removed as you find when you play wanting to click on something behind the space and finding you cant.

Text size - when altering size and font it does not change in real time. The minimum size is stupidly small, and having to relog each time to find a size that works is very hard. The minimum size should be 6 or 8 point.

I found that when adjusting button height, the width did not auto scale until I click on the ‘auto scale’ button AFTER adjusting the height.

I also set ‘text spacing’ to its lowest value and found the gap between the text and button edge to vary in certain buttons. In some it seemed to be 0 but others much larger. But they all increased when I increased the spacing size.

At certain button heights the ‘auto button width’ does not work as the text is cut off at the left and right edges. ‘one click’ taller or smaller and the problem can stay or go. This is with text spacing to its lowest value, which I expect many will use to keep ‘dead space’ to a minimum.

I created a guild with 1 member and it did not disband after 5 minutes as it should have as it had less than the minimum number of required members.

At the moment the guild key does NOT show up as a key when a character is holding it.
It shows up as a pouch bag.
Please kindly switch the image for a actual gold key just like shown in inventory.

the inscription reads that “Talad may bless the souls” this implies that he also may not. “May Talad bless” or simply “Talad bless” would be a plea for his intercession. “Talad blesses” would be an affirmation to the reader that they are indeed blessed by Talad whether or not it is actually true.

As the title suggests you continue to get the system message you have gained practice when using a skill despite your practice level not actually increasing.

i have seen people who log and quit(crashing) in second due using incompatibile skin
update and repair should set skin to default elves .reinstaling ps propably will not help because these configuations are in diferent folder

these two npcs need to be separated a bit outside their house at 1 AM

The description of the “Armor Repair Kit” says
“To use it equip the armor and type /repair <location> in the chat window. Example /repair boots ,/repair torso ,/repair gloves ,/repair arms” according to the examples it should be /repair pants to repair the “<armor type> Pants”.

As the title suggests if you add a name like;

Venalan

And you then edit this to say

Venalan “dev”

When you load the client next time around the " will have broken the aliases_name.xml file so none of the added name notes will show. It is because you end up with the following in the xml file

<alias name=”Venalan” alias=”Venalan “Dev”” />

the extra [dev”“] is an unknown component of the <alias /> so breaks the whole formatting of the file.

Today I saw two characters with a supposedly empty family name, yet it seems to be present. When you greet them, the system message with a trailing dot looks like:

SelfFirstName SelfLastName greets TargetFirstName  .

According to the log file, it is indeed a whitespace, not an Unicode invisible char.

I wonder if it may be related to PS#6482, but I doubt.

Crafting HA
combine 4 q300 medium steel plates with 1 q50 chain arms give worse quality then
combine 2 q300 large steel plates + 2 q300 medium steel plates with 1 q50 chain torso
there is the same amount of q300 ingerdients but its in one stack for arms and 2 stacks for torso
edit Quality 175 vs 227

If you ask him a question he doesn’t know how to respond to he uses the default verbal answers.

Now that we have a working pet AI that can properly follow a player it may be an appropriate time to suggest the addition of something to cater to tradesmen such as traveling merchants and miners who are frequently overloaded by the weight of their inventory.

There is already evidence of large beasts of burden and carts in game and it may be time to implement Pack Animals or a small cart you can pull yourself to increase your overall carrying capacity. aside from the obvious utility value it would also add some RP value allowing merchants to sell directly out of their carts and have enough inventory on hand to negotiate deals along the roads.

I’ve updated the bug to reflect what is happening with the current code, r9606

At the moment the following option will show “red apple (1 of 2) (1/2)” and “red apple (1 of 2) (2/2)” for the menu pair Menu: no. Menu: yes.

…

P:RA.
Menu: bla.
Smith: wana help.
P:RA1. P:RA2.
Menu: no. Menu: yes.
Smith: shame.
Smith: good.
Complete red apple step 4.

It seems there are now duplicate code checks for counting subsets, or duplicate displays of one counting. This option should really show “red apple (1/2)” and “red apple (2/2)”.

Also now, when you have 8 menus visible from many different quests the number shown is (1/8)-(8/7) so it is done on a total number of menus available, not on a by quest basis. For example, if you have 3 quests active and 8 steps the numbering could be (1/3)(2/3)(3/3), (1/2)(2/2), (1/3)(2/3)(3/3)

When you add a filter string to the /study window the empty lines between the item entries is lost such that you end up with long list of items. I think it might look better if the empty lines were maintained when a search string is entered

As the title suggests, when you change the button height with width set to ‘auto’ I would expect the button width to scale with it. It does not. If you change the width setting from auto→manual→auto the correct width is set.

Potentially related

It is possible that when names appear the window correctly resizes and the full name is shown. But when you move back to images only the width is set to the minimum so you end up with very tall very thin buttons. But the icons have the dimensions you would expect for button height set to max so you can only see the central portion of the icon.

I can make this happen by following these steps.

1 - Button height to minimum
2 - button width to manual (and moved to minimum)
3 - button width to auto
4 - set button height to max
5 - button/icon width is fixed and when you change name↔icon you get the broken display

If you don’t follow these steps the width for change between icons and names works correctly

There are many time in quests and KAs when they have the same trigger, for example “about armor” or “about apples”.

When you click a quest menu (or type some text to an NPC) the first dialogue(s) to be searched should be quests and if a matching trigger is found the quest menu should be sent, then if nothing is found in a quest it should search KAs. What is currently happening when you have two or more matching triggers you are getting a random choice between the quest response and the KA response. This results in players getting what seems to be a response from the NPC but the quest does not continue.

My Kran can eat certain non-Kran food, such as fish, bread, and possibly other kinds of food without getting indigestion.

Since plenty of other non-Kran foods give indigestion, I’m sure this isn’t normal.

This is a collection of Combat System bugs

As the title suggests all magic items made by crafters need to be identified. As every magically crafted item made the same way ends up giving exactly the same buff, there is logically no need for the crafter to need to identify an item as they will always know what it will do…

I tried attacking a kikiri with two ‘Dark Dagger’ and I got the following system messages

(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >You’ve gained 1 practice points in Knives & Daggers.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:29:33) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >You’ve gained 1 practice points in Knives & Daggers.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.
(20:30:37) >Your dark weapon drains 10 HP from Venalan.

So every attack I do with two Dark Daggers is doing two rounds of extra damage and not just one extra round of damage.

In Fishing Lessons for Fish, the quest dialog does not match the quest notes for that particular task. In one possible task the player is told to get 6 eels and 7 manta rays, but the quest notes say 7 eels and 6 manta rays. The player seemed to indicate that it was the notes that were wrong, but isn’t online for me to double-check.

As with other windows with 1600 by 1000 and other similar ratios it does not fit on the screen properly.