PlaneShift

Not sure if this was adressed but I have a pile of quest items, that after the whipe Of quests Im not sure what I need to keep for Quest trees, or what I can get rid of. Trying to clean out my inventory/Quest items.

I Haven’t really tried to find a spoiler site that lists quest items and what they are for, or even if one exists

Currently when an NPC doesn't have a quest for player, they essentially ignore the player. This can be bad because:

1) Sometimes (e.g. the circle way quests) this comes across as a bug since the player has been directed to talk to the NPC by another.

2) It's not always (in fact generally not) a realistic behaviour from a charactization PoV.

3) The chain quests are now very long and not obvious, so players have no idea what to do next.

4) It may be something else besides more quests that is necessary. How are players to know?

I think this should be changed, and propose the following dynamic as a possibility:

A "sociability" metric would be calculated for each interaction between player and NPC based on:
factions, prerequisites required for quests, and a base number assigned to each NPC. This metric will indicate how well-disposed the NPC is towards giving quest info the player at this time. Depending on this metric (lets say a number from 0-5) the NPC could say something (or ignore the player if the number is 0). The higher the number, the more useful and specific is the response.

Some characters are grumpy by nature and will almost always ignore people or give gruff responses (like now). Many are just typical and will offer canned default responses, expect that for the higher metrics these will hint that they will have something for you later. Ideally the highest metric will look up who gives the pre-requisite quest and direct you there.

Each quest could specify overrides for any of the responses.

Both guildhouses Call of Destiny and The Jumping Groffels, show no door icons from outside.

The right hand of the Klyros looks like their claws poke through their fist.

to replicate: find a container object somewhere (such as one of the wooden crates near Harnquist’s). Put an item in the crate, and try to unguard it. There doesn’t seem to be any way of doing this, or of unguarding an item before placing it.

Grinding Kingsfoil or Wyn Pulp to Paste works in a reasonable time.

But trying the same with Red Mangrove or Sinaflar takes much more time than my Mental Stamina (669) offers. The result is a "Pile of Dust". Did someone move a decimal position?

Request for to list additional Items at the Quest Description.

I would like to have the Items aligned to the related Quests in the Descriptions to get a better Overview and some more Clues in Quests. The descriptions right now are a bit spare, my request is like this

Quest Description
XxxxX ask you for This (to go there).
(Where at some Quests the Place should obviously dont revealed.

But mainly:
Quest Items:
xxxxxx
xxxx
(needed: )
xxxxxxxx
xxyXxx

It’s very easy to miss tells, greetings and etc. For example if I talk with NPC, NPC tab in chat selected. Other char comes and tries to start dialog with me. As I read what NPC says, I miss blinking in the Main tab, so I ignore that char. As for RP, it seems that I’m very impolite because ignoring other chars. Adding popup for messages addressed to me solve this problem and I can immediately(if I want) reply to char.

My suggestion(technical background):

• on each command like <CMD> <TO_PERSON_NAME> generate event with message(tell, greet, etc.)
• this message shows in the main view like other notifications
• this popups can be toggled off in settings

lesser piles of dust (seem to be from emeralds) get assigned a number that is negative. As these are not loot they should not be going through the function that assigns a value. Crafted weapons do not get a value.

Several players of old characters who had a Groffel as pet before the quest wipe, and have to redo the pet quest, are unsatisfied that they don’t get a Groffel again, but a Yulbar instead. See: Status of Our Old Pets

May be that Yulbars didn’t exist at all when they got their pet.

May be that Yulbars are somehow preferred now, or there are just no complaints about Groffels so there is a bias about it.

Would it be possible (without extreme efforts) to ensure that redoing this quest creates the same pet race as before? Or would it be possible in cases of old characters redoing the quest after years that they are allowed to chose the race — for emotional reasons?

I was just wondering if an in game log viewer could be implemented. I don’t know how to minimize and I have to quit my game every single time I want to check my logs, also it’s useful. And makes so that new players don’t have to go around, wondering how the hell they can solve a quest, when they forgot some crucial information.

If I get a new quest while the quest & event notebook window is open, the quest doesn’t appear in the list until I close and reopen the window. Can getting a new quest cause a refresh of the list of uncompleted quests?

I would enjoy reading a bit of the Greataxe Nyshyn identified. But the scroll is empty.

Over numerous days my character has left items on the Gug altar. After un-guarding them with /guard they are checked and seen not to be guarded by the character anymore. Upon return on a subsequent login they are found to be guarded by the character again. The same items have been un-guarded several times with the same result.

bright and murky essences are made by processing 1 of the 3 essence mixes resulting in 3 product.
with higher skill you can process 2 at a time into 6 product.
to process 2 at a time you have to cut off 2 from the stack and transfer them, very time consuming.
to process 1 you dump a stack in the container and shift click on it til they are spread out.

every other higher skill same process I have looked at gave more product per ingredient.
For example 2 crystal sludge –> 5 crystal essences
higher skill 1 –> 3

(I think the severity is low, but I was unable to change it.)

I have spent days trying to name my drifter with various names. I have confirmed I am using the correct command. /pet name [name] while having the drifter highlighted. I also tried various versions of this…
/pet name {name}
/pet 1, name [name]
/pet 1, name {name}
along with many, many different names. They all come back invalid.

Then, after several days of trying, I received the message, “You have no familiar to command.” So, I tried to dismiss my familiar and received the message, “Your pet has already returned to the netherworld.” I was standing there, in game, looking at the glider when I received all these messages. So I tried to summon the pet and another one popped up, so I had two in game at the same time, both named, Aszrai’s Familiar.

If nothing else, please remove the second (or both) familiar from the game. But it would be nice to find a way to name my familiar, but not a priority.

I have an image, which shows them both near the smithy in Hydlaa, but I was unable to figure out how to attach it here. I’m sure one drifter will stick around at the smithy for quite some time.

Thanks for your time and help!

Regardless of which of the three options is selected, communication seems to switch the active tab automatically to Main if the current tab can't display it. Bug or intentional?

October 25, 2013 If 'User Interface' the wrong "Area", please move this request to where it should be.

This feature request is to provide a VIEW ONLY capability for stored items in our inventory, regardless of where we are located in the game. To be able to view exactly what we would see if we were standing in front of a storage NPC would be ideal and would be in character.

We could sit for hours and log all of our stored inventory items in a book and update it, but gaming is meant to be fun.

By granting this request it would be easier for players to:

• Help new arrivals to PlaneShift

• Help merchants know exactly how many items they have stored away that could be sold at the marketplace

• Grant auction requests much faster since we wouldn't need to run to a storage NPC to see if we have the requested item

• Complete quests. For example, we'd see we only need 2 more tefu-skins or one more gold ingot to complete a quest

the command "/pet Petname, dismiss" stopped working in the last few days.

"/pet $number, dismiss" does not work either.

The following does work:

/target Petname
/pet dismiss

Commanding pets is similar to combat skills in that you get no experience for using them but in the case of of combat you get the experience for the kill. I could not get my pet to attack with my 30 empathy, I was able to get a message that my pet targeted successfully as well as a message that my pet needed a target to attack.

Practice seems to have a cool-down period where subsequent commands give no practice. I would think that the cool down period should just be for identical commands, when you need to target something before attacking both actions should give practice.

It would be good to have some information on the state of pet activities.

Scores whose given tempo (beats per minute) is greater than the performers skill level would allow should play at the maximum tempo available to him unless it is specifically set lower than the max.
resetting the tempo with every repetition of the piece is counter-productive.

When you change button height font does not scale so you can end up with buttons with font cut in half.

Button width can be changed if it is set to manual or auto, you should only be able to change it when on manual.

Font - display for the current font should be taller and wider to show the whole font name. The position of the drop down menu could be moved up and menu size increased to avoid the need to scroll. Ideally the font choices should also use the font they are named after to make it easier to chose.

Health and mana - when you hide the bars you end up with a big block of empty space. It should be set such that this ‘dead space’ is removed as you find when you play wanting to click on something behind the space and finding you cant.

Text size - when altering size and font it does not change in real time. The minimum size is stupidly small, and having to relog each time to find a size that works is very hard. The minimum size should be 6 or 8 point.

I found that when adjusting button height, the width did not auto scale until I click on the ‘auto scale’ button AFTER adjusting the height.

I also set ‘text spacing’ to its lowest value and found the gap between the text and button edge to vary in certain buttons. In some it seemed to be 0 but others much larger. But they all increased when I increased the spacing size.

At certain button heights the ‘auto button width’ does not work as the text is cut off at the left and right edges. ‘one click’ taller or smaller and the problem can stay or go. This is with text spacing to its lowest value, which I expect many will use to keep ‘dead space’ to a minimum.

I created a guild with 1 member and it did not disband after 5 minutes as it should have as it had less than the minimum number of required members.

these two npcs need to be separated a bit outside their house at 1 AM

The description of the “Armor Repair Kit” says
“To use it equip the armor and type /repair <location> in the chat window. Example /repair boots ,/repair torso ,/repair gloves ,/repair arms” according to the examples it should be /repair pants to repair the “<armor type> Pants”.

while hammering a heated alpha ps sba blade I was able to start spell research without int erupting the hammering.

when hunting in group popup window asking winer to allow loot is annoying, i wish leader of group have options that
1 allow to share loots
2 disable shares and the one who take loots keep it
without the annoying window that popup every time

Crafting HA
combine 4 q300 medium steel plates with 1 q50 chain arms give worse quality then
combine 2 q300 large steel plates + 2 q300 medium steel plates with 1 q50 chain torso
there is the same amount of q300 ingerdients but its in one stack for arms and 2 stacks for torso
edit Quality 175 vs 227

The reason for this request is to prevent guests from stealing.

If one tries to login into a locked guildhouse one has no key for one’s position should be reset.

Guildhouses usually have only one exit so the position outside of the house should be clear.

If you ask him a question he doesn’t know how to respond to he uses the default verbal answers.

In the enchanting armor book the recipe for enchanting brigandine helms calls for combining a mercenary helm and a set of steel plates into a brigandine helm kit. This does not work. In order to create the kit, you need to use the helms of darmath book. Otherwise the process works.

why in gods name we have a seperate sit and stand command is beyond me in fact it is completely idiotic. there is no need for /stand in a game that is properly programmed

/sit should perform both functions act as a toggle

void sit()
{
if(player.isSitting) player.stand();
else player.sit();
}

with as script like this the /stand command can be removed from the game simplifying shortcuts.

additionally the addition of a sit right click action on specific furniture should be added to ensure that characters who wish to appear sitting in chairs will be properly snapped into position and animated as such

Now that we have a working pet AI that can properly follow a player it may be an appropriate time to suggest the addition of something to cater to tradesmen such as traveling merchants and miners who are frequently overloaded by the weight of their inventory.

There is already evidence of large beasts of burden and carts in game and it may be time to implement Pack Animals or a small cart you can pull yourself to increase your overall carrying capacity. aside from the obvious utility value it would also add some RP value allowing merchants to sell directly out of their carts and have enough inventory on hand to negotiate deals along the roads.

According to Wanderer’s description, he wears robes

GMs should have the ability to add, edit, delete notes on players.

command line commands :
/note ‘playername’ ‘comments’ /note list
/note delete id

GM console interface :
-when you click add you get ‘enter player name’, and then comments
-GM can then read them, edit them, or delete the whole thing
-permission level required to edit/delete configurable

There are three files (jade_theme.png, splash.png, yesno.png) in client_base.zip, which contain an incorrect iCCP.
When using a newer version of libpng you get the following warning: “iCCP: known incorrect sRGB profile”.
So just delete the color profile in the next art update, please.

Scrolling with the mousewheel does not work if the mousecursor is over one of the listed buffs.
It works only if the mousecursor is besides or between the buffs.

svn code r9595

My Kran can eat certain non-Kran food, such as fish, bread, and possibly other kinds of food without getting indigestion.

Since plenty of other non-Kran foods give indigestion, I’m sure this isn’t normal.

Logging out after a longer time of idling, one would expect to login with full health later. But I noticed that my health is a little lower and starts regenerating after I logged in. This is especially obvious for characters with not yet maxed stats, appears to be a relative impact.

I wonder if this is caused by buffing armor parts, e.g. Ulbernaut Bracers (+8 Strength, boosting HP too, indirectly). I could imagine that the max. HP are calculated without buffs, and the current health gets limited to this lower maximum (lower than while logging out previously); then the engine loads armor parts after logging in and has to update the HP maximum, which is now higher with buffs, and the current HP get a headroom to fill up.

Hi
I seem to have a glytch where frequently (but not always) an NPC will not talk to me no matter how long I wait
However if I click “Bye” and try again he will now talk
It means I have to click every NPC when he wont speak to me twice to be sure there is no dialogue

Even with the recent improvement of the spell research behaviour, I think it is a bit tedious to find spells with 3 glyph combinations or spells with 2 glyphs of 2 different ways.

I propose that the glyph order doesn’t matter in the assemble slots.

Wouldn’t it also be more logical if the glyph order doesn’t matter?

This is a collection of Combat System bugs

I noted that previous bug report 4573, similar in nature, has been closed. I reached out to GMs and it was confirmed that once a broadsword has been furrowed into a blade then the only option is to then make it into a kit. The flow as of 04/04/2015 looks like stock>alpha>beta>delta>brittle>dull>rough>blade (gap) heated>super>red>stock.

If the expected results of working broadswords is to have them be a one time blade, then these extra steps (heated>super>red>stock) are confusing. If the expected results is that the broadsword should be able to be worked from stocks to blade to stocks then currently the step to make the (final) blade into a heated blade is missing.

Having to use the Working with Stock book simply to heat steel/ingots for forging makes for a silly amount of swapping back and forth between Working with Stock and Book of Blades. It’d be simple enough to add the steps for heating stock and ingots to the Book of Blades…

During fight using ranged weapons if the player is attacking a mob but doesn’t face them the arrows are still used but no attack is led and the message about facing the target is shown.

Sometimes attacking with ranged weapons cause the showing of the facing target message and the attacks are not dealt even when the target is near and straight before the player (the arrows are consumed as well).

I recently wanted to create a shortcut to summon my Rivnak, but it doesn’t work exactly like it should…Here are the commands of my shortcut :

/dequip leftfinger
/equip Ring of Summon Familiar
/pet summon Bigadin
/dequip leftfinger
/equip Crystal Ring

Of course, using the commands one by one in the chat works perfectly. But here is the chat log after using the shortcut :

Usage: /equip [stack count] [slot] [item name]
You feel a connection to your familiar.
You’ve gained 1 Practice points in Empathy.

Weirdly, it seems that when the last line is executed, my ring is still considered equipped, and so it cannot be equipped. I thought that with another item which exist in several copies, it would work through equipping another copy, but even that do not work. I tried using it with 2 Silver Rings in my inventory (so the line /equip Crystal Ring become /equip Silver Ring), and both when the quality is the same and when it is not (and so it doesn’t stack) :

You feel a connection to your familiar.
You’ve gained 1 Practice points in Empathy.
This item cannot be equipped.

I hope the informations are sufficient to allow you to understand and solve the problem.

This is actually for version 0.6.5.

When I craft Small Battle Axes I find that all skill gains are in Blades, Blacksmithing, and Mace making. I feel that somehow the skill gains for Axe making have been replaced by Mace making. That makes it harder to build up axe skill to turn the kits into a finished axe.

Axe handles need changed to blades making

Banded Mail Armor stores in MA category, trains MA but the description reads HeavyArmor under the weight/size/quality. So can we get it changed to read MA please.

The book shows

Powdered [Raw Material]
Grind [Raw Material] into Powdered [Raw Material] using Alchemist Table with Wooden Mallet
Hammer [Raw Material] into 3 Big Chunks of [Raw Material] using Alchemist Table with Wooden Mallet

Both using Alchemist Table with Wooden Mallet
When only the 3 big chunks is correct

In the CC tab it says “Xiosa talks to you through nature,” Xiosa should be Xiosia.