If the new “NPC DIalog” is enabled, and you have an NPC targeted (possibly from an earlier quest dialog), you suddenly stop if you move far enough away from this NPC.

Probably losely related to PS#5629

First - It seems there is a delay in stamina measurment, so what can happen is that you are moving, getting low on stamina, you stop moving but even after that you can still get sometimes “You are exhausted” message. This is more a feature than bug, but I think it is important in this case. So now what happened:
I was riding a rivnak and got low on stamina. I continued riding and reached my target destination before I had actually run out of stamina, but I was very low at the time. I dismounted the rivnak and around this moment I got “You are exhausted” message. After I dismounted I couldn’t move - the game was saying that I was exhausted. I couldn’t cast spells or do anything that is prevevented when you are exhausted. However, the game was displaying I have full stamina (After dismounting a pet there is a small delay before your health and stamina values are updated to be on par with the current values.) and this did not change even after two minutes I was waiting. So the game still though I am exhausted - mounting again the pet did not help. Client restart helped of course.
I think that the problam may be somewhere between delayed “you are exhusted” message and after dismount stamina and health synchronization. It seems that when you receive in right (or wrong :) ) moment the exhaused message the synchronization after dismount fails in some way resulting in character being viewed as exhausted permanently.

When you trade with and NPC and it is walking, it won’t stop, and you will no longer be able to buy or sell anything from it, since it will be far away from where you started to trade…

The screenshots pretty much tell the whole story.

1) Have char A (Primatus for me) enter the GH and sit on some furniture.
2) Have char B (Sabor) log into the GH.

A on A’s client is atop the furniture, while on B’s client A is in the furniture. Probably a symptom of the known issues with object spawning in PS, but still….really guys?

In Legacy PlaneShift, the default movements are:
W = Walk forwards
S = Walk backwards
A = Turn to the left until keypress ends
D = Turn to the right until keypress ends

However in PSU, the movement is as follows:

W = Walk forwards
S = Turn 180 degrees and then walk forwards (towards the camera)
A = Turn 90 degrees left and then walk forwards (at 270 degrees from camera)
D = Turn 90 degrees right and then walk forwards (at 90 degrees from camera)

This is incongruent with legacy movements, but also complicated by the requirement to use the mouse for both UI interaction and movement concurrently.

It may be that this is a result of the absence of a ‘third-person follow’ camera, but behaviour should follow that of legacy.

Narrow gateways that were easily passable for mounts in Legacy are now hard or even impossible to get through. One example is the first stairs going down in the Welcome Area. It takes several tries with jumping to get through. And speaking of jumps, they are much lower than in Legacy, so fences in Hydlaa have become unsurmountable.

When I walk forward using W, I need to use mouse-look to turn around while walking. Walking a winding stair, I need to keep turning and turning while walking … until suddenly the mouse pointer left the game window. (Running the game in Windowed mode.)

The mouse pointer should not move in the game window while I press a mouse key to look around.

when you kill merceneries some seems to stand up and dont despawn from some times so the new respawn stand into the standing corpse.
on attack the corpse is shown with some health so when they moce the bodies you switch kinda targets whatever model you target.
Also it can happen that on respawn the merc. will get invisible.

The four Onyx Dagger members who share the hall with two Grendols do not respawn once killed.

My drifter just ate a stack of Terevan Wine Bottles that I planned to temporarily put on the ground in order to mount.

This seems inappropriate (not to mention a costly habit)!

In the NPC dialogs, there are several instances of modern-day abbreviations like "OK", "info" or "wow" (may be acceptable) being used. For example, in Fruntar's "Schaeminare soap" quest you can respond with "OK, where do I get this soap." (should be a question mark there, too). Also, in "A wife's dilemma", you can say to Tilavi "Ok, what kind of deal?". Maybe one could run a database search for "OK", "Ok", etc. on the NPC/quest responses to find all occurences?

Quest: Kilas wants his abacus back

[NPC] Kilas Tungse says: Do you think you can help me with a quick errand?
[NPC] $player says: I love to learn!
[NPC] Kilas Tungse says: Thanks.
[NPC] Kilas Tungse says: I lent my abacus to Crosh Dunehammer, the guardian of the dungeons.

vs.

[NPC] $player says: about dungeon
[NPC] Kilas Tungse says: What dungeon? Are you sure you heard right? If there was a dungeon anywhere nearby, I'm sure the city would've had it sealed off by now.

This "There is no dungeon" conspiracy makes consistent quests hard where inhabitants of the dungeon are involved.

Since NPCs move, Narwin visits Ervin Fromaad and must pass Grimal on his way. So it doesn't make much sense anymore that he can't visit him in person and request the token himself.

The first time a character does With a Way Levrus asks what thier favourite way is then there is an option of “Sure, you already told me about Circles” which Levrus does not recognise.

Sometimes when I’m attacking NPCs with a spell, I’ll see the following messages:

“I failed to move, will teleport in 5 sec.” “I was teleported here, waiting 5 sec.” “now I located the spawn point.”

I’ve had this happen with rogues in Ojaveda and in the Sewers where there don’t appear to be any obstacles to their movement.

It’s really annoying to have to go track down the NPC to finish it off.

these two npcs need to be separated a bit outside their house at 1 AM

Cutthroats on Oja Road 2 pathing seems problematic. They do not attack back when attacked and repeatedly teleport to this location even while standing here and do not appear to be able to move from this location: ojaroad2 469297.69 -333307.041 5554.62

in ojaroad 2 i decided to check the cave and on going into it i found part way to the left in the cave a velnishi tail movinf with the rest of it within the wall.

coords are ojaroadcave01 /pos -356053.56 279411.28 6022.86

the tail actually comes out and back into the wall.

serpent gobbles are supposed to patrole the river irfon on both banks with a sleeping area and fishing area close to /pos 400650.50 -327828.62 7508.37. at present they simply stay in one place unless you attack them. they then move and attack back. in legacy, they would attack regardless of your strength against them.

tavern de kadel has 3 npc’s stuck in the doorway to the kitchen, on the inside. pathing needs adapting so they leave to go where they are supposed to be

/pos 188805.91 -322772.31 13170.30

after you'd exhausted to move while riding, and you've unmounted and dismissed your pet, you can't move until client restart.

How to reproduce:
1. mount your pet
2. ride on it while you exhausted to move
3. run shortcut:

/unmount
/pet ID, dismiss

4. you see your physical stamina is full and you can't sit or move anywhere.

PS: if you is not exhausted to move, this bug not occurs.

How to reproduce:
do something which require much physical stamina: move many stuff in your bag, do something at anvil or something another.
and then run following commands:
/sit
/unmount
/target <PET NAME>
/mount ←– here your physical stamina will be full!!!
/stand

I've just tested some Pet commands (by using a summoned familiar) and the following commands don't seem to reach the familiar NPC:
/pet [name,] assist
/pet [name,] guard
/pet [name,] run
/pet [name,] walk

Please note the Minion behaviour used for pets is using almost the same data in SVN. The steps I used to replicate the bug:
1. summoned a familiar
2. issue a command /pet [name,] follow/stopattack/stay/run/walk
3. use the /info command to know the last perceived command.

When reaching step 3 the info command should show something like that:
(12:08:36) [System] >Last perception: ownercmd:stopattack
instead for the above commands an error message is outputted (just like the command was wrongly typed or isn't recognized).

By using the percept command on the NPC like /percept ownercmd:run the behaviour is correctly run and works as expected.

Also please note that assist/guard commands appear in the help.xml file while the new run/walk don't.

the command "/pet Petname, dismiss" stopped working in the last few days.

"/pet $number, dismiss" does not work either.

The following does work:

/target Petname
/pet dismiss

no task description

Pet follows properly after summoning or after telling it to follow. Whenever Damola moves the pet follows.

However once I told it not to follow anymore, whenever I tell it follow again, it follows to the current location of Damola, but does not continue following. I.e. it only follows one time and not until told otherwise. But only after having been told not to follow once.

Every time I unmount and mount again it adds another about 90 degrees so that after four times the char sits on the mount in almost correct orientation again.

Tested on Rivnak and Drifter.

However after dismissing a pet and summoning it again once after logging in, the sitting position keeps locked. But only if the character mounted it once before dismissing the pet for the first time.

So or so there is something off with the sitting position of the char on a mount after the first unmount and mount again cycle.

# Expected result

Character always sits on the mount in correct orientation.

If you fall from a height, fall damage and body development is not calculated while on a mount.

In the quest Lorytia Starhammer and the Clan reunion Lorytia mostly uses "ye" instead of "you". But the use is not consistent throughout the quest. You'd think that if she regularly says "ye" she'd not switch to "you" for a sentence or two in between, sometimes even switching back and forth within one sentence.

f.e.:
"That is very kind; I thank you. Here is the note: just tell him I sent you."

"Oh, I am sorry, you are still here… do you want to hear what happened?"

"I know ye worked very hard on your piece for the competition and you should have won. I take full responsibility for shortchanging you on the scores."

"He may have some means to get them prepared for you, but ye might make your journey faster if you have them on hand."

There might be more later in the quest, but I'm not done yet.

Upon completion of the without a way quests ( In my case Crystal Way ) govell sends me to Levrus log:

[NPC] Govell Mihdren says: This will prove the mastery you gained in the Crystal Way.
(06:14:52) [NPC] Govell Mihdren says: Make a good use of it, Resildren.
(06:14:55) [NPC] Govell Mihdren says: And take this.
(06:14:58) [NPC] Govell Mihdren hands you an amulet.
(06:15:00) [NPC] Govell Mihdren says: Bring it to Levrus, one final lesson awaits you there.

but Levrus will not accept it, to make sure I completed my leveling (200) and returned, and he will still not accept it?

I’ve talked to other masters of the other ways and this seems to be a global problem, is this just not implemented yet, or is it a bug?

I’ve completed the child quest that looks for the Boss around Gugrontid, but Sapling of Xiosia hasn’t completed as well.

In Fishing Lessons for Fish, the quest dialog does not match the quest notes for that particular task. In one possible task the player is told to get 6 eels and 7 manta rays, but the quest notes say 7 eels and 6 manta rays. The player seemed to indicate that it was the notes that were wrong, but isn’t online for me to double-check.

legacy allowed to discard repeatable quests

Noriko has been doing a lot of quest testing lately, and has found a number of quests where quest notes should be added so that returning players (or those who don’t use their logs) can pick up where they left off. I’ll pass along what she’s put in the petitions to this report.

*Road to Master Cook Chapter One
*Road to Master Cook Chapter Two
*Road to Master Cook Chapter Three
*Road to Master Cook Chapter Four

In each case, the quests notes are very good except when Mirra first gives the quest. The notes only include a generic line about helping Mirra be a better cook, and fail to mention where she’s sent you or what she wants.

*Helping Mirra

No useful quest notes at all.

*Where the Courier Went

Once the player gets the name Shian Sulkin it should probably be added to the quest notes, in case logs aren’t available.

I’ll add more as they’re reported.

Approaching Stalg does nothing to the quest, can’t complete.

After getting the quest from Roya go to Brado and tell him “You might find this useful to you.”. He will not answer (or rather the anwser is empty) and you can not continue the quest.

quest deliver a letter, from krestal dhusho does not complete. delivery to mr yasoj completes without words. but the letter to kora windstone is rejected. she does not accept the letter at all and krestal dhusho is unable to complete the quest without that delivery being accepted.

krestal is in hydlaa plaza . pos 207830.66 -335409.66 10595.37

mr yasoj is in fact benack yasoj . pos akk central 538320.75 -370447.25 15354.24

kora windstone is in the wilds of bronze doors 2 road

Quest: The Arrivals
Entering and completing the lava cave isn’t recognized by Raithen. I’ve been there twice, but only used the exit once after crossing the magic stones.

Talking to Menita and confirming the quest with “I will try” crashes the server.

Issue: Harnquist regularly calls “Blades, shields, repair kits! Get them here!”. If you are collecting a quest from Harnquist, his regular cry can replace a page of his dialog providing the quest information and there’s no way to get back to the page of dialog that was replaced.

His regular cry should be supressed whenever a player is talking to him, so the player can read all the information he is providing.

The quest has a number of triggers that must be completed in order to progress that do not appear to be working in Unreal. The three I’ve found are:

1) Proximity to the rock with the action location that moves players into the cave,

2) Use of a cog/mechanism, moving one of the rocks, and

3) Solving the door puzzle and entering the small room.

I’m not sure if these are supposed to complete steps that are not sequential with the immediately previous steps, or if they are meant to set variables, but either way they don’t seem to be doing the job. Talking to Raithen gives no sign that you’ve completed any of these tasks, even if you’ve done them all.

I can get players past this by setting a later step manually, but given the (suspected) use of variables or non-sequential steps, it seems likely I’ll just mess things up for them.

Scenario: You have several in process quests, You go to NPC, look for list of quests. You pick, a quest offered by say Levrus, “more coal”. To you, it sounds like a new quest, so you click on it to see what it is. It then starts you over on that quest from the beginning. You completed and forgot that quest long ago, but it then gets deleted from your completed or in process quest list.

   Unless you check all your completed or in process quests, you are doomed to repeat the entire quest.

If you have many quests done, you may think this is a new quest due to user memory loss, or similar titles of quests. In addition, quest notes are saved locally to a machine, so if you have several machines, or installing new OSs your notes don’t follow.

   As an experienced player, I kept trying to please the guards for a pet for a long time before realizing this situation.

The option “I’ve made my choice” appears only when you leave the Quest dialog, and initiate it anew.

After Telzanna tell about a profession (my character chose cook), the options to ask her about other professions do not appear again.

The quest “Beer Tasting Event” (that I understand is the one to start into the Brewing skill) is not working as intended.

OBSERVED:
~~~~~~~~~

When I initiate the quest dialog in the interaction menu with a double click on the option
“You brew ales and beers I see, and smell.”

the quest master replies with the generic
“Looks like you are in search of fame and honour. Unfortunately I have not tasks to help you in that.”

The quest is not taken up accordingly.

EXPECTED:
~~~~~~~~~

The quest dialogue should be properly initiated and a quest log entry should appear after that.

As reported by Stalfos

“Something’s Brewing” If you accept Narwin’s drink ““Thought you’ nev’ offer!…” the other option doesn’t disappear: “How many times must I tell you,…” you can’t get the kegs until you click it. Later Jarda also has both options available, the drunken and sober speech options.

“Kimlorm Needs a New Prayer Book”, “Kimlorm sent me” remains an option after you have clicked it.

In some quests there is a delay before you can talk to an NPC again. One example of this is Its Gone Bad. In Legacy the players got a message like “You have to wait for 10 minutes before you can continue this quest.” so that they knew what was going on, but in PSU they don’t get the message.

Admittedly, the message is very OOC, but without it there’s no way for a player to know why they cannot proceed with the quest. If the messages cannot be restored, maybe a line of dialog from an NPC saying that they’ll have more to say later?

when completing a quest with a “choose your reward” section at the end, if you don’t select a reward before clicking “Select a reward” it doesn’t stop you before continuing or give you a default reward, it just completes without giving you any of the possible rewards.

When a friend completed the “Levrus Rat Eyes” quest, she forgot to select a reward before clicking “Select a reward” and received none of the options given.

The quest option advised by Sharven (”[…] HE has decided […]”) is correctly presented by the interaction menu,

but on selection it is not recognised by Roniston (”[…] You could ask me to tell you about something, perhaps?”)

Quest progression is thereby blocked the Keen Edge chain broken again (after yesterday’s fix of “Slimy Doubt”).