Na(p)t settings?!?!?!?!

[DakuGosuto]

OK.....

I got a speedtouch ethernet modem and it has a built-in firewall now i wanted to set the napt settings but i need an inside ip (outside ip i use the server\' ip and portnumber 13331) which ip do i use for inside ip my internet ip or something else cause my network ip isn\'t working

i don\'t know for sure if it\'s this problem why i can\'t connect to PS since it\'s a quite vague error screen:

can\'t find entrypoint of the procedure HrLanConnectionNameFromGuidOrPath in DLL-file netman.dll

[Karosh_Steinkatz]

Hmm, seems like you have a wrong version of netman.dll or it is corrupted. Try reinstalling your TCP/IP driver. Do you use a router with a built-in dsl modem? In this case you don\'t need special NAT settings, but make sure that you have it\'s IP address entered as your gateway in the TCP/IP settings. Set your own address to something within the same range, for example:
router address -> 192.168.0.1 (this is the common default)
your address -> 192.168.0.2
If you are still having problems connecting to the PS server try to enable path forwarding to port 13331 on your address in the router setup (most likely accessable per internet browser). Some few routers seem to need that.

[CadRipper]

Ah, it finally came back to me.

Similar problem

Remove or rename the netman.dll file which is in your Planeshift directory (where you installed the game). It is a conflict between this one and the one from your operating system.

Hope it helps  

[DakuGosuto]

yes it worked thanks CadRipper (at least the updater works so now i\'m going to check if i can play the game)