Missing libs.

[Racal]

as I mentioned above all files are where they are supposed to be but I still get that error

and don't you realize nothing is impossible.

[Wired_Crawler]

OK.
Does it happen also for psclient and updater ?

Check the file /etc/ld.so.conf. There should be the line:

/usr/X11R6/lib

If it is missing, add it.
Run command ldconfig (as root).

If it still does not help - cd to where PS is installed and run:

ldd pss

What does it say ?

[Racal]

Essentially it says I'm missing libxpm.so.4
most other 3d aplications work just fine including 3ddesktop and Flightgear
and yes psclient pssetup and updater all give same respone
libxpm4 is installed though I've checked and double checked urpmi
       
        linux-gate.so.1 =>  (0xffffe000)
        libpthread.so.0 => /lib/tls/libpthread.so.0 (0xb7f52000)
        libz.so.1 => /lib/libz.so.1 (0xb7f3e000)
        libdl.so.2 => /lib/libdl.so.2 (0xb7f3a000)
        libnsl.so.1 => /lib/libnsl.so.1 (0xb7f26000)
        libm.so.6 => /lib/tls/libm.so.6 (0xb7f01000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb7edb000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb7e72000)
        libGL.so.1 => /usr/X11R6/lib/libGL.so.1 (0xb7e0e000)
        libXaw.so.8 => /usr/X11R6/lib/libXaw.so.8 (0xb7db1000)
        libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0xb7da8000)
        libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0xb7d90000)
        libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0xb7d3f000)
        libXxf86vm.so.1 => /usr/X11R6/lib/libXxf86vm.so.1 (0xb7d3a000)
        libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0xb7c6d000)
        libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0xb7c5f000)
        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7b83000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb7b78000)
        libc.so.6 => /lib/tls/libc.so.6 (0xb7a4a000)
        /lib/ld-linux.so.2 (0xb7f7a000)
        libXmu.so.6 => /usr/X11R6/lib/libXmu.so.6 (0xb7a33000)
        libXpm.so.4 => not found
        libXp.so.6 => /usr/X11R6/lib/libXp.so.6 (0xb7a2b000)

[Wired_Crawler]

Could You upload your /usr/X11R6/lib/libXpm.so.4 file somewhere ? NOT that symlink, but the file it points to (for example libXpm.so.4.11). Use http://rapidshare.de for example.
It is so strange that I would like to check it.

[Induane]

he could try locating the file then simply copying it into his planshift/libs directory.

[Racal]

I've fixed my problem it was driver related, I installed the latest nvidia driver which they just released and now everything works great.

[kaNi]

I'll post this here too

Code: [Select]

./psc: error while loading shared libraries: libXau.so.6: cannot open shared object file: No such file or directory
how to fix? how do I get that fixlibs.sh thing?

[Solannya]

[Snip]

You can update your libs dir by running the fixlibs.sh script found in your PS dir. This may resolve your problem.

I would love to do so, but I don't have a fixlibs.sh script any longer. I downloaded the 016 client, since the update from 015b didn't work and now I miss the libXau.so.6 library. No script to fix that. What can I do?

I am running PS on a SuSE 10.0 OSS with a  2.6.13 Kernel.

Solannya

[kaNi]

[Snip]

You can update your libs dir by running the fixlibs.sh script found in your PS dir. This may resolve your problem.

I would love to do so, but I don't have a fixlibs.sh script any longer. I downloaded the 016 client, since the update from 015b didn't work and now I miss the libXau.so.6 library. No script to fix that. What can I do?

I am running PS on a SuSE 10.0 OSS with a  2.6.13 Kernel.

Solannya

Check the thread "SUSE 9.0 PRO"

[fozner]

Tracking down dependencies was difficult but not impossible on Fedora Core 5.

If you are using this distro you must get very familiar with rpm and yum

man rpm
man yum

Also yumex with the --forcei386 option if installing 32 bit apps on 64 bit system like mine.

[Solannya]

Check the thread "SUSE 9.0 PRO"

Great! That finally did the job. Thanks for your help 

Solannya

[Drifty]

Hey guys i have a problem when i sellect my charecter in the selection screen the game dies.
In the konsole it says( Failed to set material "enkif_arm" on part "Left Arm"
Segmentation fault )

What does this mean?
How do i fix it?

[Drifty]

its ok i fixed it 

[Drahlian]

I just downloaded the 3.019 client and getting an error about missing libcal3d.so.12.

I'm running Ubuntu 6.10 and get the following error when I try to run ./psclient:

$ ./psclient
./psc: error while loading shared libraries: libcal3d.so.12: cannot open shared object file: No such file or directory

I installed libcal3d through Synaptic, but it installs libcal3d.so.11. I tried the same thing on Ubuntu 7.04 (the latest version) and it also installs version 11.

Where can I obtain this file, or can Planeshift be tweaked to use version 11 instead of 12? BTW, I tried copying and linking the .11 file and naming it to .12, which let the game start to load, but then segfaults almost immediately.

-Drahlian

[citizen]

I just downloaded the 3.019 client and getting an error about missing libcal3d.so.12.

I'm running Ubuntu 6.10 and get the following error when I try to run ./psclient:

$ ./psclient
./psc: error while loading shared libraries: libcal3d.so.12: cannot open shared object file: No such file or directory

I installed libcal3d through Synaptic, but it installs libcal3d.so.11. I tried the same thing on Ubuntu 7.04 (the latest version) and it also installs version 11.

Where can I obtain this file, or can Planeshift be tweaked to use version 11 instead of 12? BTW, I tried copying and linking the .11 file and naming it to .12, which let the game start to load, but then segfaults almost immediately.

-Drahlian

I installed version 12 from this place:http://download.gna.org/cal3d/cal3d/gnulinux/debian/unstable/src/libcal3d12_0.10.0+0.11.0+rc2-1_i386.deb

but I have Debian Etch. Maybe the differencies are not so big, so you can give it a try and install it.